So I’m an electrical apprentice at a restoration shop and my first task is to install a kwik wire universal wire harness after I pulled out the old one. I’m currently constantly getting stuck because I don’t know what some things are and what they do, my goal today was to make sure I can wire the ignition switch up correctly and while for the most part it’s easy I ran into this thing that the ammeter wires are connected to as well as it being connected to the fuse box, a relay and the ignition switch and it’s destroying my brain because when I look at my wiring diagram this thing doesn’t exist apparently. I’m hoping you guys can help me identify what it is and how I can wire my ignition and ammeter without on the new one.
The white wires connect to the positive of the ammeter gauge and the starter and then to this thing, the blue wires connect to the relays and the fuse box as well as the ignition switch.
Ps my boss doesn’t have the time to help me out so I’d much appreciate if you geniuses can help me out
The white wires connect to the positive of the ammeter gauge and the starter and then to this thing, the blue wires connect to the relays and the fuse box as well as the ignition switch.
Ps my boss doesn’t have the time to help me out so I’d much appreciate if you geniuses can help me out