Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
It will be sprayed on the shop walls next to the dyno.I can see the turbo, but I don't see a transmission. Is it already gone?
Process delayed (... understatement of the year). Should be on the dyno soon. Last check at the shop, they were welding custom exhaust segments and hooking up the transmission cooler lines. Minimal fab remains before we're tuning...Did the transmission survive the dyno?
If you’re going there, the diff breather his pull off as wellLooks great ! And the brake line doubles as a limiting strap
I wish the list was that short...If you’re going there, the diff breather his pull off as well
No offense intended, I have enjoyed following your thread, thanks for posting.I wish the list was that short...
Intercooler fits behind grill and low in front of radiator; there's a surprising amount of dead space right in there...Obviously excited to following along and live vicariously thru you thanks for bringing us along.
Can you share intercooler location + pipe routing when you’re done?
- Brian Crower Toyota 1FZFE Stroker Kit @ 5.2L
- 108mm Stroke Billet Crank
- Billet Sportsman Rods
- Custom JE 101mm 8.5:1 Compression Pistons
- ARP 93-98 Supra/01-05 IS300 2JZGE Head Stud Kit
- Engine rebuild kit with new gaskets, bearings, timing chains/guides, etc..
- Machining: bore/hone, cylinder head rebuild, etc..
- Swapped internals to JE Pistons, BC Crank, and new H-beam rods
- Custom machined crank, machined pistons, balanced assembly, and reassembled motor
- Turbo = Borg Warner EFR B2 7670 .92AR VTG WQ
- EFR Install Kit
- T4 Inlet Gasket
- FPRO35-060-03 PTP Turbo Blanket Large EFR 7670+
- Injector Dynamics ID1050X Injectors 11mm (Blue)
- Denso Lower Cushions (Set of 6)
- Turbo Intercooler
- Link G4X Fury ECU installed as Piggy-Back to EOM ECU
- Full Performance Exhaust
- Ceramic Coat Downpipe
- Custom tuned ECU on Dyno
- Fluidyne 2-PASS OIL/TRANS COOLER
- Brown and Miller Plumbing for trans cooler and turbo oil feed/return
- CSF Toyota Land Cruiser 4.5L Heavy Duty 3 Row All Metal Radiator
- Lexus LX 450 / 8/92+ Toyota Landcruiser 80 Series Front Slotted 4000 Series Rotors
- Lexus LX 450 / 8/92+ Toyota Landcruiser 80 Series Rear Slotted 4000 Series Rotors
- Hawk LTS Truck/SUV Pads (Premium) FRONT
- Hawk LTS Truck/SUV Pads (Premium) REAR
- ARB / OME Nitrocharger Sport Shock Landcruiser FRONT
- ARB / OME Nitrocharger Sport Shock Landcruiser REAR
- Motul RBF 600 Brake Fluid
- Brake labor to install pads & rotors and bleed brakes
- Suspension labor to install shocks
- New ARB Bull Bar Non Winch Mount Bumper (Black)
- Clean and undercoat frame, axles & links with military spec black Cosmoline
- Misc: Gasket Oil Cooler, Gasket Oil Pump, Spring, Valve, Thermostat, Water Pump, Injector O-ring, MAXLIFE-D Valvoline, Maxlife ATF
Aye! Lmao just got done with this process too... money be damned, it's all about the smiles per gallon and chirping 33" MT's launching on pavement and pulling past people on the fwy with their wtf looks..