audi2nr

Time for another update, boy do I have a lot of them to catch up on....the little time I get these days I am is usually spent doing something small to the truck or working on our house and I don't have much time to get things documented. I also...

Local A/c shop or this https://coldhose.com/?utm_source=google&utm_campaign=cold-hose&gad_source=1&gclid=Cj0KCQjwlN6wBhCcARIsAKZvD5hYj9hf3FetjTPUardJBjV2revN95Gy9_iSx8I7-EN-MvNq4FNJ4pMaAiNfEALw_wcB

I bought my 97 back in August, sight unseen, from a Mud member in WA. I bought it because it looked like a good one, and I was pleased to see that I actually got a nice one. One thing led to another, and despite the fact that this is an off...

the plastic painted part of the side view mirrors, i do not need the entire mirror assembly with the glass or motor unless the seller is unable remove the caps without destroying them. the paint on the tops of my exterior mirrors are destroyed.

Looking for LX450 mirror caps with paint in good condition, champagne pearl color. Shipped to 98275 i do not need the entire side view mirror assembly unless you cannot take the plastic caps off without destroying them. thanks, Marc

Do you have any lx450 mirror caps in champagne pearl?

Time for an update. I've been tinkering with the LC on the weekends and sometimes leaving early from work during the weekdays. Nothing really worth posting because it hasn't been picture worthy. Painted the windshield wipers, mirrors, whatever...

How's the ignition switch trim? I need a replacement

I've used the paint from paintscratch.com 1b1 is extremely hard to match, especially on old paint. I'd repaint everything

All right time to start detailing a bit more of my build! We've covered the transmission rebuild, engine, injector pump, injectors, turbo but not much else. Other drive train updates include a new NPC clutch and flywheel that I bought from HD...

What is the black trim getting redone in? what is it from the factory, Flat or satin?

as of today I have ordered a new short block, head, and various engine parts. Rebuilding a new 1fz with a cometic mls. Going to figure out an airwater intercooler setup. Also doing tcase gears, shift kit, and all suspension bushings and body...

Valve cover after clear coat. We are doing something right now I will post pics of when it’s done. Cheers

More! 🤣🥸 Cheers

If you get a chance go for a ride in @SteelHunterFJ80 rig.. you won't be disappointed, I'm secretly looking at diesels too, but I think if I do go diesel it will be in a 100... I'll keep my 80 as is

Turbo and exhaust manifold reassembled and ready to install. Cheers

We are doing a diesel conversion for a customer’s ‘96 FZJ80. We decided on a 1HD-FT out of a ‘96 HDJ81 with a A442 and HF2A. We will document the build and progress here.

Pull the interior door panels, release the clips from inside the doors, that would probably save the majority of the clips

That's kind of what I was thinking, but he said plug? Not the jack side, I think you'd have to cannibalize a vaf to get one though.. but I get what you're saying.

Oh got it. So you need this 7 pin connector? https://www.driftmotion.com/AFM-Connector-7-Pin-p/dm1950.htm

https://www.corsa-technic.com/category.php?category_id=54 Has the pins you will need, and connectors if ballenger can't get them. I've used both companies, both are great.

Why not ditch the afm if you are already on a haltech?

the orientation of the clamps do not matter as long as they are clearing any parts. those are the correct hardware that is included with the tial wastegates.

Man those vdj's use massive bell housings haha!