Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I used the RAM B-367U ball mount, a 6x60mm hex socket head cap screw and a steel spacer 10mm long with an ID of 6.25mm and then a flat washer. This setup clearances the handle just by the bare minimum but keeps it very close and compact. Should you need to space the ball out further you can do so with a longer spacer or simply use three nuts and a 65 or 70mm long screw instead.
. I definitely love the beefier look but a BMC is 100% necessary with this -10mm offset.
BMC or fender liner trim? I am also waiting for the scs wheels but I dont want to do bmc. If bmc is required for 285s then I’ll down size to 275... what body mount are you actually rubbing at?
I would look at something with a positive offset and 4.75-5.5" BS if you want to keep the wheel tucked in more.
ok so will you be able to get rid of rubbing even at compression after the BMC? I am also lifting for 2” only and found lots of people even rub w/2.5” lift...Without a doubt you'll be doing some fender liner trimming. The tire doesn't contact the body mount under regular, flat driving but upon impacting any incline at an angle or reversing with the wheel cut I do get contact on the body mount. The only body mount that can possibly be a factor is the one directly behind the front wheels, this is the one that you will do the BMC on.
I am assuming that it is possible to make a 285/70 fit without impacting the body mount but not with an aggressive negative offset and SCS doesn't make anything in a 17" with less than a -10mm offset. I don't understand the position of being against a BMC as it's a relatively simple procedure and it replaces the removed metal with new material but to each their own. I would look at something with a positive offset and 4.75-5.5" BS if you want to keep the wheel tucked in more.
ok so will you be able to get rid of rubbing even at compression after the BMC? I am also lifting for 2” only and found lots of people even rub w/2.5” lift...
So just for a quick clarification and warning to all, who were you dealing with or what website? Please post the "Who, What, When and Where" of this possible scam.***Bumper update***
To keep a long story short, I think I was in the beginning stages of a scam. Needless to say, the Ironman isn't coming. I got my money back but I am now back to square one in regards to a bumper. PM me if you care to know more about the characters involved. Not sure if I am going to move forward with an Ironman, ARB, or wait for the CBI Hybrid now, giving me options always makes things more difficult lol.
So just for a quick clarification and warning to all, who were you dealing with or what website? Please post the "Who, What, When and Where" of this possible scam.