York OBA

[GreatLakesWaterjet]

 

[landtank]

F'n outstanding!!! Any suggestions on the intake of the York for those who don't have the pair valve and that nipple on the air can.

 

[GreatLakesWaterjet]

F'n outstanding!!! Any suggestions on the intake of the York for those who don't have the pair valve and that nipple on the air can.

I would just route a hose to the fenderwell and put a small K&N filter on it. I just did mine this way because it was there. Also you could drill a hole in the air cleaner and weld on a fitting.

 

[convert]

FB that is sweeeeet!! Cant wait to get this mod done. The compressor and hoses
are waiting.

 

[nakman]

Just awesome.. also eager to get this going!

 

[Boston Mangler]

F-ing Beautiful!!!!

Very eager to do this mod!!!

 

[alia176]

F'n outstanding!!! Any suggestions on the intake of the York for those who don't have the pair valve and that nipple on the air can.

Rick,
You can drill a small hole in the bottom of the air filter can and extract air out of there for the York. I did this and it also made the sucking sound of the York completely gone.

Here's a picture: http://pg.photos.yahoo.com/ph/alia176/detail?.dir=927e&.dnm=c34b.jpg

Ali

 

[landtank]

Thanks Ali, I like where you placed your tank. I was going to aks for ideas once I got the hardware in. Great looking install.

 

[SOCALFJ]

Whats the price on the bracket? any left?

Also, removing the pair valve throw a code and trigger the check engine light ?

 

[GreatLakesWaterjet]

Whats the price on the bracket? any left?

Also, removing the pair valve throw a code and trigger the check engine light ?

SOCAL, e-mailed ya.

 

[GreatLakesWaterjet]

Ok guys and gals, due to the overwelming response to this product, I have worked a deal with Christo at www.sleeoffroad.com . He is gonna stock these kits for now on. The first 10 will ship as planed and everyone will be recieving a pm today. Slee has 20 kits on order and is taking pre-orders now! Two of them are for his pesonal trucks so that leaves 18. He will be selling them for the same amount as the first ones. Everything is the same, it is just easier for me to keep track of and ship to one person. Look for several write-ups on installs coming soon. Thanks to everyone for the support in this product. Please contact me for anymore questions and Christo to purchase. Thank you Woody for a great website for us Cruiserheads. Without this, we would all be stock

 

[Boston Mangler]

Ok guys and gals, due to the overwelming response to this product, I have worked a deal with Christo at www.sleeoffroad.com . He is gonna stock these kits for now on. The first 10 will ship as planed and everyone will be recieving a pm today. Slee has 20 kits on order and is taking pre-orders now! Two of them are for his pesonal trucks so that leaves 18. He will be selling them for the same amount as the first ones. Everything is the same, it is just easier for me to keep track of and ship to one person. Look for several write-ups on installs coming soon. Thanks to everyone for the support in this product. Please contact me for anymore questions and Christo to purchase. Thank you Woody for a great website for us Cruiserheads. Without this, we would all be stock

Thanks for your help with this David, i very much look forward to the install and getting rid of my CO2 tank!

K

 

[95eighty]

Looking foward to the PM

 

[alia176]

Thanks Ali, I like where you placed your tank. I was going to aks for ideas once I got the hardware in. Great looking install.

Rick,
All this talk of heat under the hood has me wondering if I'm actually reducing the air flow to the radiator by the air tank placement. You guys are messing with my mind too much as of late

Ali

 

[Boston Mangler]

Rick,
All this talk of heat under the hood has me wondering if I'm actually reducing the air flow to the radiator by the air tank placement.

I would say yes! It looks like it is directly blocking the vents in the ARB.

Its definitely not HELPING!

 

[Boston Mangler]

Are the Block off plates for the exhaust manifold included in the kit? This seems like it would be a crucial piece that i know i cant fab up myself!

Thanks

EDIT: Just got off of the phone with David and he is going to try to make some of these, VERY COOL!

David rocks!

 

[landtank]

Rick,
All this talk of heat under the hood has me wondering if I'm actually reducing the air flow to the radiator by the air tank placement. You guys are messing with my mind too much as of late

Ali

I'm not concerend about it being there.

 

[GreatLakesWaterjet]

Are the Block off plates for the exhaust manifold included in the kit? This seems like it would be a crucial piece that i know i cant fab up myself!

Thanks

EDIT: Just got off of the phone with David and he is going to try to make some of these, VERY COOL!

David rocks!

Ok, I traced the pattern for the block-off plates for the manifold. Taking it to the laser machine tommorrow. So if you need them, they will be available.

 

[Boston Mangler]

You Rock!

Thanks David!

Any idea what type of material is recommended to make a gasket that can withstand all of that heat?

Thanks

 

[GreatLakesWaterjet]

You Rock!

Thanks David!

Any idea what type of material is recommended to make a gasket that can withstand all of that heat?

Thanks

There are factory gaskets already there. Just re-use them.