What have you done to your Land Cruiser this week? (10 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

today I am upgrading the Brake, Turn Signal and Reverse lights to LED's. 3X brighter and significantly less draw on the battery.
I ordered a harness for the headlights...hope to upgrade them later this week.

IMG_4335.webp


IMG_4344.webp


IMG_4340.webp
 
AutaviaFJ40 said:
today I am upgrading the Brake, Turn Signal and Reverse lights to LED's. 3X brighter and significantly less draw on the battery.
I ordered a harness for the headlights...hope to upgrade them later this week.

View attachment 1715901

View attachment 1715902

View attachment 1715903
Click to expand...

Where did you get LED bulbs for this? I currently have LED tail light assemblies installed, but half the LED's went out on one side, so I'm putting the old style assembly back in so I can change the bulbs when they go out. I would much prefer LED bulbs though.
 
HawkGunner said:
Where did you get LED bulbs for this? I currently have LED tail light assemblies installed, but half the LED's went out on one side, so I'm putting the old style assembly back in so I can change the bulbs when they go out. I would much prefer LED bulbs though.
Click to expand...

Amazon...i'll post links shortly
 
@Coolerman sells a plug and play flasher that works with LEDs. No cutting or splicing of harness! Worked great I recently installed, had a nice clicking sound.

Btw I also swapped all my lights to LEDs and got them at superbrightleds.com. Their LED finder was incorrect on the rear turn signal so I had to return and they shipped the correct ones no problems.

Flasher:

Flasher Parts and Adapters
 
Last edited:
ginmtb said:
@Coolerman sells a plug and play flasher that works with LEDs. No cutting or splicing of harness! Worked great I recently installed, had a nice clicking sound.

Btw I also swapped all my lights to LEDs and got them at superbrightleds.com. Their LED finder was incorrect on the rear turn signal so I had to return and they shipped the correct ones no problems.

Flasher:

Cruiser Wiring
Click to expand...
X2 superbrightled: Had good experience with their customer service... couple of returns
 
The LED's I used are Phillips...I would avoid cheap LED's
I also ordered a Toyota turn signal flasher, part number 81980-12H04 to replace my existing one...that arrives tomorrow and I can replace the turn signal lamps
 
+1 on SuperBrightLEDS.com. I installed led's for the turn signals, side markers, license plate lamps and instrument lights. I also bought two of their flashers which have worked perfectly. If I need more LED's I will order from them in a minute.
 
HawkGunner said:
Where did you get LED bulbs for this? I currently have LED tail light assemblies installed, but half the LED's went out on one side, so I'm putting the old style assembly back in so I can change the bulbs when they go out. I would much prefer LED bulbs though.
Click to expand...


Here are the LED's I ordered:
Brake lights:
http://www.amazon.com/dp/B00HWS7XGW/?tag=2402507-20

Front turn signals, rear turn signals, and reversing lights:
https://www.amazon.com/dp/B00TQ8H4KG/?tag=2402507-20

You will need to update the turn signal flasher, Toyota
part number 81980-12H04:
https://www.amazon.com/dp/B01H137Y6G/?tag=2402507-20

I also ordered this kit to upgrade the turn signals so they are visible from the side:
Daniel Stern Lighting Consultancy and Supply

IMG_4342 2.webp
 
You must log in or register to reply here.

Similar threads

Mike Shull
Where Have you Driven Your 40-Series This Week?
14 15 16
Replies
306
Views
30K
bernardbar3
bernardbar3
T
What is this?
Replies
11
Views
601
jim land
jim land
C
  • Question Question
What tools do you keep in your FJ40?
2 3
Replies
42
Views
4K
65swb45
65swb45
wchevron
What size lift do I have.
Replies
10
Views
708
JackA
JackA

Users who are viewing this thread

  • Total: 11 (members: 1, guests: 10)

    Share this page

    Back
    Top Bottom