Thanks but they used the air gun on the lugs and went a little crazy on each one. The rings are fine. If anything I will try to get them to replace them. Not sure how good a job you can touch up forged wheels???
What have you done to your 200 Series this week? (27 Viewers)
- Thread starter MScruiser
- Start date
-
- Tags
- 200 series
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Tripledave
SILVER Star
Sounds like dip**** dealer morons owe you four new rims. If accept nothing less, as my level of disdain for dealer incompetence sinks to an all time low.
Btw, I'd buy your scratched wheels if they do the right thing here
Sent from my extremely unreliable mobile device using IH8MUD Forum
MScruiser
obsessive-compulsive oppositional-defiant wise-ass
- Thread starter
- #823
I see what you did there, @Tripledave
Finally got round to changing my rear right tailight that had the lens busted on the side and was full of sand also what's with the weird 3 plug harness you have to swap over onto the light. Best thing was when i was done and decided to test the light I realised I didn't swap the indicator bulb 
Also found this grill couldn't find a satoshi one. Something might go on the center.
(Hint: 75311-90K00)
also what's with the weird 3 plug harness you have to swap over onto the light. Best thing was when i was done and decided to test the light I realised I didn't swap the indicator bulb
Also found this grill
couldn't find a satoshi one. Something might go on the center.(Hint: 75311-90K00)
nice looking rig
We need more pictures of yours. That tire & rim combo is awesome
Finally got round to changing my rear right tailight that had the lens busted on the side and was full of sand
View attachment 1047838
Also found this grill
(Hint: 75311-90K00)
View attachment 1047839 View attachment 1047840
Hi Nomad, I like how you replaced the original fog lights on the TJM with the metal plate and an upgraded fog light. Did you custom fabricate that?
Yup they're the moroimoto fogs off the retrofit source. But as i was too lazy too keep looking for steel i ended up with 3mm steel whuch was a
to work with.Install pics are on my thread if you're interested.
https://forum.ih8mud.com/threads/hitting-the-uae-desert.612135/page-19
Thank you!
A few warnings if you want to get it done better. Have a fabricator with some patience and creativity. These fogs are meant to replace the stock fogs on the bumper so their angles are way off if put on directly. Mine still are a bit high and throw a ton of light down the side as well. Also levelling screws are soft i stripped the notch on one of them but luckily i was able to continue aligning it by pushing and rotating the lens.
If you need any close up pics let me know
As frustrated as I was with the dealer scratching the RW they have made it right. They called today that they ordered me 4 new RW wheels. Sorry tripledave- they are going to use the rim doctor on my old ones. Probably throw them on another vehicle or sell discounted. Keep u posted on what they do. But very happy they took high road and putting new ones on.
Congrats! Great to see proper customer service
MScruiser
obsessive-compulsive oppositional-defiant wise-ass
- Thread starter
- #833
Drove to Atlanta today. I am hanging out with my in-laws, and tomorrow I am going to do the diff drop, just to give me something to do while I am out of town.
I did put about 400 miles on the 200 today, most of it being highway miles. The 35s did well. Pretty decent road hum, but just like Willy, my wife didn't seem to notice, and I didn't point it out to her. According to the odometer, I was getting around 14 MPG...not great, I know.
I am meeting up with @Archtaan this weekend, because he wants to see a 200 on 35s.
I did put about 400 miles on the 200 today, most of it being highway miles. The 35s did well. Pretty decent road hum, but just like Willy, my wife didn't seem to notice, and I didn't point it out to her. According to the odometer, I was getting around 14 MPG...not great, I know.
I am meeting up with @Archtaan this weekend, because he wants to see a 200 on 35s.
Tripledave
SILVER Star
It's quite refreshing to hear that they did the right thing.
Dammit
Thanks for looking out though. I'll keep my eyes on eBay and CL now as I've seen dealers post some wheels lately.
Thats promising - I going to try that that out soon and see what mine yields. Good work - nice resultsSo here is a before and after of my mileage change after my Spark Plug change last week.
Exact same route, exact same times of day and similar temps/weather conditions.
Stock iridiums
NGK's
I'm telling you Black keys or WuTang makes that noise go awayDrove to Atlanta today. I am hanging out with my in-laws, and tomorrow I am going to do the diff drop, just to give me something to do while I am out of town.
I did put about 400 miles on the 200 today, most of it being highway miles. The 35s did well. Pretty decent road hum, but just like Willy, my wife didn't seem to notice, and I didn't point it out to her. According to the odometer, I was getting around 14 MPG...not great, I know.
I am meeting up with @Archtaan this weekend, because he wants to see a 200 on 35s.
Yeah, I was pretty pleased to say the least. Should pay for themselves pretty quickly. I hope to pick up another mpg or 2 when we transition away from this winter blend crappy fuel.
