tampacruiser95
Upgrades are coming.
If I travel I will put it on a roof rack. Otherwise I don't want to carry the weight.Curious what you're gonna do about a spare tire?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
If I travel I will put it on a roof rack. Otherwise I don't want to carry the weight.Curious what you're gonna do about a spare tire?
Well, maybe things are different down under, but I can tell you this:Not true. I am in Oz and have the required components to mount the side kit for the Roller Floor ordered with ARB. It has arrived in store but I have not had time to collect.
Will post images when I receive and have installed (with part numbers).
Cheers
Steve
Adelaide, Australia
Started yesterday afternoon and finished up this morning. Fridge goes in soon.
View attachment 2082419
If I travel I will put it on a roof rack. Otherwise I don't want to carry the weight.
What part number is that 1/2 height drawer on the left?
I have been thinking of swapping out my full size for something like that. I thing it's a way better setup as if you are putting stuff in the back the tail gates holds in the groceries instead of the rear hatch window.
To fit the side kit likely you need just a plate of aluminum bolted to the side.
No pics, didn’t happen. Isn’t that the rule?Spent Friday in Beautifiul Big Bear. Sidewinder and Heartbreak Ridge.
Got some 18 inch Tundra steel wheels off craigslist for $80. I really like how it turned out. View attachment 2084650View attachment 2084651View attachment 2084652
Well, maybe things are different down under, but I can tell you this:
1) the the front bracket of the side kit is too short to a) clear the wheel well and b) to match the height of the bracket on the drawer side.
2) there are no mounting holes on the side of the Roller Floor with which to mount the rear bracket, so unless you want to drill through the side frame (or use self tapping screws) there's no way to mount the bracket.
Thanks for sharing the part number and kit photos. I’ll check with ARB USA to see if this is available here in the states. Can’t wait to see the finished look. Will also be curious whether you have to remove everything from the vehicle, or if you just remove the roller floor and tray/drawer from the frame for installation.OK I have collected the roller floor adaptor panel kit from ARB.
If you want one the part number is RFFKADP1045 (R or L for right or left.
View attachment 2085026
Once this is installed (and I have to remove the drawers completely apparently to fit the adaptor kit) then you can attach the side kit.
I don't have time to fit today but will do so this week and post images.
View attachment 2085028
Cheers
Steve
Installed a super cool rear hatch light.. could not be happier with this mod..
View attachment 2085053View attachment 2085054
Was that a kit you bought somewhere?