I tackled a driver’s door lock actuator problem. Was able to find lots of good videos that guided me during this process.
What have you done to your 100 Series this week? (83 Viewers)
- Thread starter SHUSH
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Tackled this same issue today on the front passenger door. Thanks to all the write ups by the members.
Yes - it should.
davidp14
SILVER Star
did some super hardcore offroading easy overlandy type stuff. didn't hate it.
Last edited:
Didn't do plugs while you were in there?
Love a stock-ish cruiser
Sit on your hands - looks great, bet it functions even better
If MFD means the factory screen, then no, the GROM does not bypass it. It displays CarPlay etc and front and rear camera images on the factory screen.
Replaced spark plugs 18k miles ago. Chipping away at the maintenance list little by little.
davidp14
SILVER Star
Haven't driven my LX in months but when gas is 2.72 a gallon, you fill up!
I want to do all my coil packs as well. Where did you buy them from? They aren't cheap.
Reg or premium?
You're asking a guy that drinks wine out of a box.Reg or premium?
Built a platform/drawer system in the back of my LX! I used guidance from MUDZLLA (thank you) who dropped some knowledge in this thread: Wanted - 100 series drawers - https://forum.ih8mud.com/threads/100-series-drawers.1331652/
The entire setup uses .5" birch plywood, and is plenty strong.
Ended up tearing out the 2nd row seats and making full length drawers. The flap up near the front seats can (and will) be deployed with the seats moved up -- giving ~80 inches of room fore-aft. I am tall, so am very excited to be able to stretch out. I head out on a 3 month climbing trip on Friday.
Don't look too close at the finish. If it's gotta look good, I'm not the one to do it.
The entire setup uses .5" birch plywood, and is plenty strong.
Ended up tearing out the 2nd row seats and making full length drawers. The flap up near the front seats can (and will) be deployed with the seats moved up -- giving ~80 inches of room fore-aft. I am tall, so am very excited to be able to stretch out. I head out on a 3 month climbing trip on Friday.
Don't look too close at the finish. If it's gotta look good, I'm not the one to do it.
I got mine from Rock Auto.
FamilyCamper
SILVER Star
ehhhhhhhh...looks pretty mint to me! Nice work that's going to be epic for your long journey. Post more pics once you get it all packed in! I've got too much family transport going on to do drawers so all my tools and spares are in boxes for now. Love a good drawer setup
New Aisin t bet kit and water pump. New serpentine belt, idler, tensioner, aisin fan bracket, aisin clutch fan, OEM radiator hoses and clamps. OEM SPEC metal heater tee’s. Fresh coolant.
Poly rack and pinion bushings installed. Man it was a lot of work. Proud of myself and glad the truck has all the right parts on it.
It fired right up after doing all that and no leaks! I even found the AC leak! It’s the condenser
Poly rack and pinion bushings installed. Man it was a lot of work. Proud of myself and glad the truck has all the right parts on it.
It fired right up after doing all that and no leaks! I even found the AC leak! It’s the condenser
Ordered retro stripes from street-race.org. Not an easy install but it’s coming together ok. We’ll see if I can finish installing without screwing up. I feel in a little over my head but it’s just for fun so who cares. Here it is with Red applied, more pics to follow (or not).
New fuel filter. Definitely was time. idk if previously was done before in 260k miles. Drained the excess fuel from the old one and at the end there was very faint discoloration.
