It wasn't too bad. The most time consuming part is taking the center console apart. Their is one bolt that is under a corner of the gas tank and it was kinda a pain to get off and back on too.
What have you done to your 100 Series this week? (28 Viewers)
- Thread starter SHUSH
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
What p/n was that seal? The ones I’ve found on the Toyota parts websites say they don’t fit my 05. Thank ya!
Been a long with work, but did a get a chance to do the following .
I think I finally identified the source of my leak in the rear cargo area after sealing the third brake light twice (3m weather-strip adhesive and then butyl rope) and it was not coming from the third brake light or at least isn't anymore. It seems to be coming from the hatch seal weather-stripping and i have ordered a replacement from Mcgeorge that hopefully should come this week. I cant wait to put carpeting back in and have 3rd row installed for the first time as an owner.
Broke the nut that attaches the 3rd row seatbelt on driver side, going to have to figure that out another day. Might need the nut rewelded
I finished ordering all my parts for timing belt work. Getting one step closer!
Installed my scanguage II which looks and functions awesome.
I think I finally identified the source of my leak in the rear cargo area after sealing the third brake light twice (3m weather-strip adhesive and then butyl rope) and it was not coming from the third brake light or at least isn't anymore. It seems to be coming from the hatch seal weather-stripping and i have ordered a replacement from Mcgeorge that hopefully should come this week. I cant wait to put carpeting back in and have 3rd row installed for the first time as an owner.
Broke the nut that attaches the 3rd row seatbelt on driver side, going to have to figure that out another day. Might need the nut rewelded
I finished ordering all my parts for timing belt work. Getting one step closer!
Installed my scanguage II which looks and functions awesome.
it looks awesome!
Added one of these because my noob self ran my never-before-used winch line straight off the drum weekend before last, trying to stretch how far I could get it to go.
What a TREMENDOUS pain to get the line through that second time, inside the bumper, with my chub arms, though.
Hopefully it helps it stay.
What a TREMENDOUS pain to get the line through that second time, inside the bumper, with my chub arms, though.
Hopefully it helps it stay.
ok cool, thats the P/N I was looking at too. Thanks bud.
I got around to some peace of mind maintenance so I can make the most of 2023. Aisin timing belt kit with water pump, thermostat, cam seals, front crank seal, fan bracket, serpentine idler pulley and new alternator. Also got the new Tuff Stuff Alpha RTT mounted. 201k miles on the clock and running perfect!
I did an HID retrofit on my '01. WOW! My lights are bright. Thanks to all the folks who have gone before and detailed the how to. It was easier than i thought it would be. Should have done it years ago. It's nice to have light. Makes driving at night a lot of fun.
Love the retrofit- what kind of projectors did you use? Looks great.
Finally had enough of the incessant rattling, so I bought some new speakers for the doors. Needless to say, it was about time.
Not the best speakers money can buy by any means, but HUGE improvement!
Not the best speakers money can buy by any means, but HUGE improvement!
How much did this retrofit cost? I'd say it's money we'll spent regardless!
It was a Saturday of work plus about $540.
Eccentricity alert 
, not for everyone.
Layout, measure 10x:
Then execute:
“You never actually own a Land Cruiser. You merely look after it for the next generation.”
One day this will be his cruiser, just building it for him.
, not for everyone.Layout, measure 10x:
Then execute:
“You never actually own a Land Cruiser. You merely look after it for the next generation.”
One day this will be his cruiser, just building it for him.
Last edited:
GCC style!
That is sharp. I've been considering something similar. Where did you pick up the stripes?Eccentricity alert
Layout, measure 10x:View attachment 3229059
Then execute:
View attachment 3229057
“You never actually own a Land Cruiser. You merely look after it for the next generation.”
One day this will be his cruiser, just building it for him.
View attachment 3229058
Thanks, I got them from eBay.
Guess this weekend I get to crawl around and try to figure out where this spot came from. It’s weird. Doesn’t seem to come from the fill hole, may just be a random spot of grease that plopped there. It’s about time I changed the diff oil anyhow.
