ramangain
Clarksonian disciple
You have three options with that white residue.
Snort it, shoot it, or smoke it.
Last edited:
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I dig it looks meatyFedEx just dropped off my new wheels and tires right before it got dark, i slapped it on and drove around. Very impressed with the balancing, at 80mph still doesn't shake.
Yall dig or nah?
Looks great!FedEx just dropped off my new wheels and tires right before it got dark, i slapped it on and drove around. Very impressed with the balancing, at 80mph still doesn't shake.
Yall dig or nah?
I decided to thoroughly clean and refurbish my factory roof rack since it was already off the vehicle. Thought I was going to ditch it, but I was swayed by my wife to put it back on .
Several passes with an orbital buffer and Meguiar’s Ultimate Compound brought back the shine after 17 years of neglect. Then I protected it with some ceramic wax. Back on the Cruiser it went. Used anti seize on all the bolts.
View attachment 2748023
View attachment 2748024View attachment 2748025View attachment 2748026View attachment 2748028
Ordered some new tires to mount on my 2021 Tundra Trail Edition takeoff wheels. Going on my stock height 2004 Land Cruiser.
View attachment 2747035
1/4 inch spacers added to the front two mounting points will take away the goofy rake the rack has. FYI.Prospeed Roof Rack Installed!
View attachment 2747961
View attachment 2747962
View attachment 2747963
View attachment 2747964
Take the the factory roof rack and crossbars off our, and LXs are twins. I dig the 7-spoke wheels - what’s the offset on those?FedEx just dropped off my new wheels and tires right before it got dark, i slapped it on and drove around. Very impressed with the balancing, at 80mph still doesn't shake.
Yall dig or nah?
18x9 +12mm offset, 275/70/18 Ko2. They are aggressive but I love the poke out look. Need to beat up the plastic where the pinch weld is and raise the vehicle an inch and that should stop the rubbing. There’s an old saying during my riced out cars day, “if you don’t rub, your setup is weak”Take the the factory roof rack and crossbars off our, and LXs are twins. I dig the 7-spoke wheels - what’s the offset on those?
Been a while, but I installed my Ironman 2” lift with diff drop and Dobinson UCA’s.
Before:View attachment 2747891
After:View attachment 2747893
Also put new leather on the old steering wheel, learning in the process that I may not be the best at upholstery, but it still looks and feels a ton better. I opted out of the new wood grain in the before picture (let me know anyone wants it)
Before:View attachment 2747898
After:
View attachment 2747899
Another minor fix was to replace some cracked windshield wiper fluid tubing so that I can use the wiper fluid.
Nope, we leave Thursday, stop at the edge of West Virginia, then Devils Lake and Wisconsin Dells, then Flambeau River area, then MN. Probably wont involve much off-roading though, I'm not really sure what the options/trails are like out there.Very nice. Have you taken the trip yet? We just returned from 12 days in WI, MN, and ND.
Got the Emu wings installed, nice to have better access and fewer rattles! PS glass is spoken for, anyone need DS?
View attachment 2748261
View attachment 2748262
Hi, I'm curious about the driver's side glass and hardware for the mechanism to move the window. Any chance you still have any of it? Also did you have any pictures of the removal of the glass? I'm attempting to design a wing of my own.Got the Emu wings installed, nice to have better access and fewer rattles! PS glass is spoken for, anyone need DS?
View attachment 2748261
View attachment 2748262
@clrussell What did you use (products and tools)? I'm looking to tackle this on my 2002 white LC as I want to avoid the clear coat cracking on me since it doesn't fit in the garage.Continued the paint correction last night, got the glass tinted this am.
View attachment 2746520
View attachment 2746521
View attachment 2746522
I do indeed still have the glass and all the hardware. Removal is pretty simple, pull molding, 2x 10mm nuts up front (deep socket needed) at the hinge, and 2X bolts (12mm?) at the rear for the motor assembly. I don't have any photos of the removal process, but the following videos on the Emu Wing install show the details of the removal:Hi, I'm curious about the driver's side glass and hardware for the mechanism to move the window. Any chance you still have any of it? Also did you have any pictures of the removal of the glass? I'm attempting to design a wing of my own.
I’ll get pics tonight of everything used.@clrussell What did you use (products and tools)? I'm looking to tackle this on my 2002 white LC as I want to avoid the clear coat cracking on me since it doesn't fit in the garage.