What have you done to your 100 Series this week? (79 Viewers)

[MountaineerLC]

Replaced a dying AC Delco battery with a Napa Legend Premium 34R. It's smaller, but has better specs than the 27F's I could find locally. Fitment was no problem, but I did have to cut a piece of 1/2" plywood to use as a spacer until a proper spacer arrives next week.

 

[2020 Rocks]

295/75R16 showed up, nitro terra grapplers

View attachment 2646158

Sooo, because I like you folks I’ll pass along a little mud hole I went down this evening. After throwing these new shoes on her she didn’t want to dance. She starts making lovely clicking sounds from the front passenger axle....not thrilled. Started searching mud and came across some sad stories of woe, cv axles, drive flanges, bearings oh my. I took another look, inspecting brake dust shield...and then noticed the balancing weights. The way they’re place it’s bumping into something in the caliper regions. First pics show passengers side wheel with grooves, others are drivers side that are untouched/not clicking. Who knows, maybe this is driving one of you nuckingfuts as I type this.

wheel weights rubbing caliper

I just had my 5000 mile service and they rotated the tires. Now the front left wheel weights slightly rub the caliper. My first inclination is to...

www.tacomaworld.com

 

[JunkCrzr89]

Sooo, because I like you folks I’ll pass along a little mud hole I went down this evening. After throwing these new shoes on her she didn’t want to dance. She starts making lovely clicking sounds from the front passenger axle....not thrilled. Started searching mud and came across some sad stories of woe, cv axles, drive flanges, bearings oh my. I took another look, inspecting brake dust shield...and then noticed the balancing weights. The way they’re place it’s bumping into something in the caliper regions. First picks show passengers side wheel with grooves, others are drivers side that are untouched/not clicking. Who knows, maybe this is driving one of you nuckingfuts as I type this.

wheel weights rubbing caliper

I just had my 5000 mile service and they rotated the tires. Now the front left wheel weights slightly rub the caliper. My first inclination is to...

www.tacomaworld.com

View attachment 2647531

View attachment 2647532

View attachment 2647533

View attachment 2647534

View attachment 2647535

View attachment 2647540

Those stick on weights are terrible anyways and will fall off if you do any wheeling. Take it back and get regular weights. Problem solved.

 

[2020 Rocks]

Those stick on weights are terrible anyways and will fall off if you do any wheeling. Take it back and get regular weights. Problem solved.

Yep, they’re just a couple miles away. Will take it back in the morning.

 

[saucebox]

Sooo, because I like you folks I’ll pass along a little mud hole I went down this evening. After throwing these new shoes on her she didn’t want to dance. She starts making lovely clicking sounds from the front passenger axle....not thrilled. Started searching mud and came across some sad stories of woe, cv axles, drive flanges, bearings oh my. I took another look, inspecting brake dust shield...and then noticed the balancing weights. The way they’re place it’s bumping into something in the caliper regions. First picks show passengers side wheel with grooves, others are drivers side that are untouched/not clicking. Who knows, maybe this is driving one of you nuckingfuts as I type this.

wheel weights rubbing caliper

I just had my 5000 mile service and they rotated the tires. Now the front left wheel weights slightly rub the caliper. My first inclination is to...

www.tacomaworld.com

View attachment 2647531

View attachment 2647532

View attachment 2647533

View attachment 2647534

View attachment 2647535

View attachment 2647540

Just turn the radio up, looks like the problem will sort itself shortly

 

[Eyedaho]

Yep, they’re just a couple miles away. Will take it back in the morning.

Am I wrong to think that's a lot of weight too? Like maybe they can spin that tire a little and get it closer to balanced?

 

[awesomeissquid]

Am I wrong to think that's a lot of weight too? Like maybe they can spin that tire a little and get it closer to balanced?

Whats a typical weight that everyone thinks is acceptable?

 

[blackohio]

new subwoofer day. 10” mb quart

 

[ylexot]

I did this a few weeks ago, but finally got a sec to do a little write up.

 

[AlpineAccess]

I did this a few weeks ago, but finally got a sec to do a little write up.

View attachment 2647704

It's unique

 

[JROBBZ]

JDM Toyota Alphard rear wiper

03 onwards rear tailgate emblem

SONY XAV-AX8000 headunit

 

[Kabanstva]

I did this a few weeks ago, but finally got a sec to do a little write up.

View attachment 2647704

I thought this was blue painters tape at first glance. Why are you missing one of your orange 3/4” bullet lights on the passenger side?

 

[ylexot]

I thought this was blue painters tape at first glance. Why are you missing one of your orange 3/4” bullet lights on the passenger side?

The color is surprisingly close to painters tape. It's Monstaliner Smurfadelic blue.

The "missing" blinker isn't missing so much as placed on a different plane on the bumper face. Hard to see in that pic. Here's another that is slightly better for this view. I wanted to have a little more side on signal visibility.

 

[04UZJ100]

The color is surprisingly close to painters tape. It's Monstaliner Smurfadelic blue.

The "missing" blinker isn't missing so much as placed on a different plane on the bumper face. Hard to see in that pic. Here's another that is slightly better for this view. I wanted to have a little more side on signal visibility.

View attachment 2647921

Interesting.....not my cup of tea.

 

[HoustonFj80]

Installed Huracan tailgate storage lid and rear hatch lights for camping.

 

[G-Cat]

I spent a bunch of money with @Onur . The 1999 100 Series has been eating aftermarket CV axels since an insurance claim used Autozone parts while I was away from home for 4 months.

Coming up on 290K miles, with no intention of selling, it was time to make the front-end right with Toyota.

I hit up @Onur, and just as he has done for most of the last 20 years, he took extra time on the phone, talking me through the solution.

I use a shop that isn’t familiar with Land Cruisers, but are honest guys and fairly priced. From the Northeast, @Onur fills the gap of needed experience to my Toyota problems.

We settled on replacing everything a mechanic will touch (less caliper) while replacing the CV on the D/S, and just the CV on the P/S as it has had no issues.

 

[G-Cat]

@Onur even assembled the hub and labeled each Toyota part for the shop...

@Onur , the Land Cruiser SME formerly known as Beno, came through as always.

For me, especially, it’s his deep knowledge of Toyota 4x4s and sound reasoning/advice that I value most.

Thanks Onur!

 

[04UZJ100]

Installed Huracan tailgate storage lid and rear hatch lights for camping.

View attachment 2648499

View attachment 2648501

What lights did you go with?

 

[HoustonFj80]

What lights did you go with?

Here’s the Amazon link, they make them in red as well.

Amazon product ASIN B07H5CQV44

 

[L3TT3RS]

I bought it and drove it from Brooklyn to East Texas.