What have you done to your 100 Series this week? (30 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Underbody rust treatment.
PXL_20201125_224225193.jpg
PXL_20201125_224259623.jpg
PXL_20201125_224431062.jpg
 
Inner and outer tie rod on the driver side following the tips from inner tierod replacement 1hr step by step no pictures 1 bannana. I managed with a handful of large channel locks and a pipe wrench, but I probably won't do the job again without the proper tool for the inners.

Tomorrow...the passenger side (still without the proper tool). Then steaks, because turkey sucks
 
Inner and outer tie rod on the driver side following the tips from inner tierod replacement 1hr step by step no pictures 1 bannana. I managed with a handful of large channel locks and a pipe wrench, but I probably won't do the job again without the proper tool for the inners.

Tomorrow...the passenger side (still without the proper tool). Then steaks, because turkey sucks
FYI the autoparts stores typically rent the tools and I know for a fact O'Reilly's carries the inner tool set #67178. Might help you out.
 
Installed king ktrs-79 coil springs to get ahc pressure at rear down. Went from 9.4 to 7.4 in the rear fully loaded. May look to add spacers too - but I'll see how it rides when it's empty.
 
Finished off my 4x4Labs rear bumper build and damn it looks good! So happy with it! Matches my sliders and front bumper so well. Look at all that clearance!!

ZdcFF81.jpg


eZyEW2k.jpg


o4FmoxW.jpg


bGvvAcp.jpg


STjK1dv.jpg


p0Eax7o.jpg


4fyP3wY.jpg


ipQmTr8.jpg


r28DZoc.jpg


e9o8Nwq.jpg


AxOMbbD.jpg


fwuCbNY.jpg


Things I used:

Miller 211 welder: Amazon.com
ColorRite Aerosol Toyota 1E9 Galactic Grey Pearl Metallic + clearcoat: https://amzn.to/3l0num4
Seymour Truck Bed Liner - https://amzn.to/2UWEAH1
Nilight LED Amber+White pod: https://amzn.to/374h8x9
Flat mount LED pod #ad: https://amzn.to/372bM5z
Milwaukee Hole Saw Kit: Amazon.com
Looks excellent Jimmy!
 
FYI the autoparts stores typically rent the tools and I know for a fact O'Reilly's carries the inner tool set #67178. Might help you out.

Ah man, I didn't even look ahead of time. I'd read in one of the threads (I think?) that the stores didn't carry something with the 42mm. Stupid for sure.
 
Ah man, I didn't even look ahead of time. I'd read in one of the threads (I think?) that the stores didn't carry something with the 42mm. Stupid for sure.
Huh, never would have guess that. I decided to forgo inners on mine since I will just get new when I do the steering rack. Maybe you can get lucky and get a tool for the other side.
 
Finished carpet installation, found some change stuck to the floorboard and received by James Baroud RTT

IMG_2369.jpeg


IMG_2379.jpeg


IMG_2383.jpeg


IMG_2387.jpeg
 
Looks,great. Can you post more pics please (different angles) as I am on the fence on getting a set myself.
Here you go, obviously this is with halos off.
BDC7212E-7536-4F8C-8B34-A02D281FF203.jpeg
B2D5F099-E073-494F-A653-852DB034286B.jpeg
93B46E9D-1B04-4755-80F1-6FBEC02C9376.jpeg
45DCDA4F-2C17-47D2-86FD-51F3A82371F3.jpeg
BB791047-5B61-47EC-99BB-3C1638563D10.jpeg
 
Finished off my 4x4Labs rear bumper build and damn it looks good! So happy with it! Matches my sliders and front bumper so well. Look at all that clearance!!

ZdcFF81.jpg


eZyEW2k.jpg


o4FmoxW.jpg


bGvvAcp.jpg


STjK1dv.jpg


p0Eax7o.jpg


4fyP3wY.jpg


ipQmTr8.jpg


r28DZoc.jpg


e9o8Nwq.jpg


AxOMbbD.jpg


fwuCbNY.jpg


Things I used:

Miller 211 welder: Amazon.com
ColorRite Aerosol Toyota 1E9 Galactic Grey Pearl Metallic + clearcoat: https://amzn.to/3l0num4
Seymour Truck Bed Liner - https://amzn.to/2UWEAH1
Nilight LED Amber+White pod: https://amzn.to/374h8x9
Flat mount LED pod #ad: https://amzn.to/372bM5z
Milwaukee Hole Saw Kit: Amazon.com
Looks great. My new rear bumper comes in next week. Have you thought about doing anything with the low hanging tail pipe? Seems to be the low point still.
 
Looks great. My new rear bumper comes in next week. Have you thought about doing anything with the low hanging tail pipe? Seems to be the low point still.
On my ARB rear bumper, there are a couple of plates either side of the exhaust pipe. Jimmy could weld similar protection on his bumper, although it still looks like the edge of the resonator might be the most vulnerable piece.
 
Looks great. My new rear bumper comes in next week. Have you thought about doing anything with the low hanging tail pipe? Seems to be the low point still.
I did modify it and moved it up a couple of inches. It is way further up than it was stock so I will run it like this and if I smash it then I'll come up with something else.

W0ZGJTL.jpg


NSexsvX.jpg


2o1OV6S.jpg


6xHeTvd.jpg


VqtRkLN.jpg


The Borla Exhaust is on sale right now actually: Amazon.com
 

Users who are viewing this thread

Back
Top Bottom