What have you done to your 100 Series this week? (32 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Retrofitted some H3 5500K HID into the OEM fog light, what a PITA, had to bore a hole for the wiring through that cap and make a new connector. H3 bulbs suck, wish they used 9005 or something for the fogs. Not a lot of room to work with. Not quite dark out yet, when it's pitch black i'll take it for a spin and see how it is.

50189721863_a7ab9efc3b_b.jpg


50190523507_cdfd493473_b.jpg


50189721858_09928e5e9e_b.jpg


50190267376_5e090a11ea_b.jpg




This is with the foglight off

50189868253_d30c40523c_h.jpg


This is with the foglights ON

50189868283_b43e391a20_h.jpg



My phone camera got a little wonky, but the fogs definitely helps fill in the immediate foreground very much. I aimed them down low so they don't blind people
 
Last edited:
Doing my 7500 miles oil change interval, oil still looks clean and i drained out almost 7 quarts of what i put in last time. Truck has 205K miles now, no check engine light, no rattles, no squeaks, no leaks...just marvelous engineering. Anyone use this oil before? first time i've seen the red label like this, i'll see how it looks when i drain it out next year. Maybe i'll do a blackstone oil analysis next oil change.

50191655618_738a984e4c_h.jpg



This has been on the back burner ever since i took off my running boards for sliders, i miss the courtesy puddle lights when you unlock the vehicle, this literally took 5 minutes i don't know why i sat on it for so long. Just wire it up to the running board pigtail and plug it in and double side tape against the body.


50192464382_85d55fa09a_b.jpg


50192464112_2eb6e7056c_b.jpg


50191655488_e8dfdd459d_b.jpg
 
What headlights did you use? I like them.
Eagle Eyes with LED Halos not the old CCFL version.
These are a wonderful choice for a low cost plug n play upgrade. $215 shipped to my door. I am very happy with them so far. They actually have a decent cut-off and output. 55 watt low beam halogens.
 
it Could of been worse . If bumper still good could prob get the bumper arb bracket from them
Already have the part number and getting it ordered.
 
Installed and wired up my Redarc BCDC Dual Battery system. If any one wants my old change cup, let me know ;)
IMG_2020 copy.jpg
 
Doing my 7500 miles oil change interval, oil still looks clean and i drained out almost 7 quarts of what i put in last time. Truck has 205K miles now, no check engine light, no rattles, no squeaks, no leaks...just marvelous engineering. Anyone use this oil before? first time i've seen the red label like this, i'll see how it looks when i drain it out next year. Maybe i'll do a blackstone oil analysis next oil change.

50191655618_738a984e4c_h.jpg



This has been on the back burner ever since i took off my running boards for sliders, i miss the courtesy puddle lights when you unlock the vehicle, this literally took 5 minutes i don't know why i sat on it for so long. Just wire it up to the running board pigtail and plug it in and double side tape against the body.


50192464382_85d55fa09a_b.jpg


50192464112_2eb6e7056c_b.jpg


50191655488_e8dfdd459d_b.jpg
How does it spread the light at night? You have many more LEDs pushing the light now.
 
How does it spread the light at night? You have many more LEDs pushing the light now.


You asking about the courtesy puddle lights? I just put them in today, when it gets darker i'll take some pics. I forgot what the stock steps look like at night, but thes LEDs are not running the whole length of the truck, just focused on the driver's front and passenger's front foot area.
 
installed a ES330 2005 Navigation Radio with a JBL amp from a 2005 SIENNA. Now I need to swap out the door speakers. All istalled on my 2000 land cruiser. want to install the Steering Wheel controls too. All parts from the LKQ junkyard in SoCal.
9BA77C7D-4EB3-426C-9D9F-D6BE52523F06.jpeg
3ACBA5C1-AF72-491E-833F-5E2B8F9B79EB.jpeg
 
Retrofitted some H3 5500K HID into the OEM fog light, what a PITA, had to bore a hole for the wiring through that cap and make a new connector. H3 bulbs suck, wish they used 9005 or something for the fogs. Not a lot of room to work with. Not quite dark out yet, when it's pitch black i'll take it for a spin and see how it is.

50189721863_a7ab9efc3b_b.jpg


50190523507_cdfd493473_b.jpg


50189721858_09928e5e9e_b.jpg


50190267376_5e090a11ea_b.jpg




This is with the foglight off

50189868253_d30c40523c_h.jpg


This is with the foglights ON

50189868283_b43e391a20_h.jpg



My phone camera got a little wonky, but the fogs definitely helps fill in the immediate foreground very much. I aimed them down low so they don't blind people
i installed Honda S2000 projectors in my fog lights. They are bright.
 
Oh you've got an LC, my LX has projectors in the fogs but they're tiny. What are you running for headlights? Any night shots?
Headlights are stock. sad My S2000 mod was done about 11 yrs ago. Need to put a clean set. Bowl on projector is burnt out. not as bright. I have a set of SC430 projectors with Clear lens from a Nissan 300Z. light output is the same as S2000 projectors but with a purple cutoff color. Nice. looking on getting some 2005 headlights and putting Q45 projectors , just for looks cuz light output sucks.
 
Last edited:

Users who are viewing this thread

  • Back
    Top Bottom