What have you done to your 100 Series this week? (123 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Changed my old HB3 and HB4 bulbs for HIR1 and HIR2:

48337214_219999385561589_260153388958744576_n.png

Before

48360657_2180801368847597_6275644369957552128_n.png

HIR2

48909541_1199397686885940_1283502181286150144_n.png

HIR 1

I had planned to change the white bulbs in my fog lights for yellow, but I found out they were ready for replacement. So I ordered a new pair, and hope they will arrive before any serious snow...
 
Last edited:
@BullElk I've seen your wife's truck in Mobile before. I live in Pensacola and am over there pretty regularly visiting family. I'll be on the lookout for the rest of your fleet!
 
Changed my old HB3 and HB4 bulbs for HIR1 and HIR2:

48337214_219999385561589_260153388958744576_n.png

Before

48360657_2180801368847597_6275644369957552128_n.png

HIR2

48909541_1199397686885940_1283502181286150144_n.png

HIR 1

I had planned to change the white bulbs in my fog lights for yellow, but I found out they were ready for replacement. So I ordered a new pair, and hope they will arrive before any serious snow...
I did this "mod" too, and I'm very happy with it.
Dave
 
Out with the old (man emu) and in with the new. The OME worked ok for about meh, 7000 miles. Icons, rebuildable, revalveable, for about 60 bucks more Black Friday (for the pair) easy decision. The Icons weight soooooo much less. I'm sure the alum body will dissipate the heat for washboards...The front resi Icons I have one there already KICK ASS.

Icon.jpg
 
Last edited:
I got started on something that I was dithering about for a long time.....a LRA 24 gallon auxiliary gas tank. Cruiser Bros made me an offer I couldn't pass up. Dry fitting in progress, final mounting arrangement. I was going to paint the bottom and sides black, but you can't see the tank at all. I'll do a little "build" post when finished.

Top

tank.jpg


Side

IMG_20181216_140321856.jpg


Rear

IMG_20181216_140403550.jpg
 
Last edited:
Got my Black Friday recovery points installed! Thanks for the great deal @TRAIL TAILOR

IMG_20181216_190312_490.jpg
20181216_115615 (1).jpg
 
Any chance you would build and sell this exact retrofit?
Flattered but, I think I'll leave the retrofits to the pros.

I had Dan over at RIHIDS.com do the install of the Bi-xeon bits then I followed with LEDs highs from Super Bright LEDs, and a Morimoto high beam splitter. But Dan can very easily build that (my) exact turnkey set up.

Trust me, you'd rather have Dan do your work than me
 
Last edited:
Flattered but, I think I'll leave the retrofits to the pros.

I had Dan over at Home do the install of the Bi-xeon bits then I followed with LEDs highs from Super Bright LEDs, and a Morimoto high beam splitter. But Dan can very easily build that (my) exact turnkey set up.

Trust me, you'd rather have Dan do your work than me
Thanks! Will reach out to him
 
Installed the new @Coghlan1 ditch light brackets along with some Caliraised LED ditch light pods. First time wiring up accessory stuff but it went pretty well once I found some wiring diagrams. Their oem style switches do fit but they don’t come with a diagram and they have to be wired into their harness. Excited to get out on the forest roads and trails to aim them and test them out.

572A8CCB-BE44-4133-A706-48BFE8C429A7.jpeg

6445B11D-366B-4826-88C5-29784B31DDFC.jpeg
 
No pictures, but my AHC was running fine down into the low setting, but was having trouble going into high. The light on the dash wouldn't even light up. Changed the fluid per mud recommendations but still no luck. The fact that it went into low, but not high made me think it was a switch issue. Bought a switch off Ebay for a GX, but when I got it, the plug was different. Posted in the parting out thread asking about a switch and had @bonestock reach out to me saying he had one. A few bucks later for the second plug shipped, popped out the old plug, inserted new plug. Voila, AHC goes to high. Happy man, wife still doesn't understand why I put money into a car "you never drive". She'll never understand, but doesn't argue much.
 
I have had a seeping passenger side differential seal for sometime no drops, just slight residue, but recently it had become significant. No more leaking seal now.
20181218_210627.jpg


While I was at my local Toyota dealership picking up the new seal. I spotted this gem in a one owner 2013 Platinum Tundra...
20181219_072009.jpg

Needless to say I updated my Christmas list. Ha, I wish. I don't think I would have a license for much longer seeing how I have to be careful just driving our 200 series vs my 2000.
 
Got the LX and the Tundra at the job site! I actually used the 100 to tow 4 pallets of fence pickets! Luxury work horse!!!! Building a fence around the small town church for the in-law!

I have my employee in the Tundra today(the darn battery light just came on too)!

DC551DC5-AA49-4CDE-AE60-8557F45A6DEA.jpeg
 
Last edited:
Trespassed in a vacant golf course. Don't judge me lol, its been abandoned several years and when I passed by the gate was opened so I entered and stated crawling up steep hills and playing in the mud in 4 low with the center and rear locker on... what an amazing vehicle.
 
Cleared up some storage space in the rear. While I love the size of the 65 cooler for long weekends, the space it took up on top of my drawers was too much. So just like a couple others on the forum I removed my passenger side second row seat and quickly built a platform for it to sit on. Platform will be perfect for my future fridge but for now the cooler will work. She aint pretty but shes not going anywhere

IMG_20181220_151752175.jpg
 

Users who are viewing this thread

Back
Top Bottom