-
-
Went with 285/70/17 BFG AT KO2's (Load Range C) on Method 703 +35mm offset. LX with 1-2" of lift after AHC delete and new suspension (Fox 2.5", Total Chaos Upper arms, Icon rear coils). Exactly the offset I was looking for. Does rub a bit at... -
bwell reacted to B Hans's post in the thread Disabling the AHC and AVS systems, no warning lights. with
Like.
Finally have everything situated and new wheels/tires put on. I didn't take good measurements ahead of time, but best I can tell ended up with about 1.5" of lift in the front and 1" in the rear. Front Suspension: Total Chaos Upper Arms, 2.5"... -
-
bwell reacted to 2fpower's post in the thread Builds 2018 GCC Spec 79 Series 1HD-FTE + H152 - The Camel with Like.
airbox is a piece of artwork.
-
bwell reacted to SNLC's post in the thread Builds 2018 GCC Spec 79 Series 1HD-FTE + H152 - The Camel with Like.
Well we planned to do a first start today. Didn’t start trying until 4pm. Got a bit of an issue with fuel delivery but we trouble shot that and believe we have it mostly figured out. So perhaps on Monday. Got the air box back from powder...
-
After JTNP, we made our way east to Sedona. Many trails were closed but a couple around town were open, including Broken Arrow and Vultee (up to Devil’s Bridge trailhead). The weather was amazing and the crowds were out in force, hikers and pink...
-
6112s on 1st perch with 5160s in the back with OME 2720 springs. I have exactly one inch of rake. I’ll see if it settles more after a few hundred miles. 275/55/20 Duratracs on Tundra TSS factory wheels.
-
Got the tire carrier's broken weld fixed via a friend of a friend. Thanks Matt in Tucson!!! Saguaro. Incredible.
-
Indian Bread Rocks, AZ. Stumbled in here at night and it was epic. We caved and bought a coffee maker. No regrets...
-
White Sands, NM
-
We planned to take Geology Tour Rd from the north to Berdoo Canyon Rd, but surprisingly, Geology Tour was closed due to flooding. We were bummed but it was early and we thought we would head to do Berdoo Canyon from the south side. We stopped at...
-
bwell reacted to 2fpower's post in the thread Builds Do I have your attention.... I call it VERA. with Like.
All the steel I’m adding is 14 gauge to give it a lot of strength. The original toyota steel is typically about15 gauge but with all the rust and sandblasting it’s welding like it’s 18. Basically tack weld about 4 inches apart…. and wait an...
-
bwell reacted to DDMSteve's post in the thread What have you done to your 200 Series this week? with Like.
While I have been performing the 120K maintenance schedule of my recently purchased 2013 LX I found a trail of dried coolant on the front of the engine from a leaking water pump while doing the front diff/oil. Yesterday I spent the day in the...
-
-
It's a good weekend when she gets to play in the dirt
-
This should collect some pollen nicely
-
bwell reacted to tbisaacs's post in the thread What have you done to your 200 Series this week? with Like.
Damn son.
-
bwell reacted to PhuckItImDone's post in the thread What have you done to your 200 Series this week? with Like.
Went to the Method 314 and Yokohama Geolander M/T.
-
bwell reacted to JohnJB's post in the thread Seat Jackers for 200 Series Now Available for Preorder! with Haha.
But have you seen someone accidentally discharge a firearm in their vehicle? I have, and it was hilarious.
-
bwell reacted to SOAZtim's post in the thread What have you done to your 200 Series this week? with Like.
Yah, that's fair! So... We caved in the left rear pretty well out wheeling. That darn departure angle. So, I did that to a 3rd gen 4runner I had back 20 years ago as well. I built some front rear and side sliders and they worked well to keep the...
-
Interesting move… Thoughts?
-
Fronts Measuring from center of eyelet to shoulder of shock piston Compressed - 18.75" Extended - 24.5" Monotube. 5.75" travel. 30mm shaft with internal oil passage. 43.5mm piston. 54.5mm shock body. Lower bushing - 16mm bolt hole, 53mm...
-
bwell reacted to wngrog's post in the thread Builds 1967 FJ45 LPBlue - Tilda Bogue Service Station with Like.
Got the blower working. It does not take much to warm a 45 interior down here but I’m sure Michigan is a different story. SOR defrost elbows. SOR chain anti rattle covers I also added the VIN and “brass tag” back to the truck. I moved it to...
-
bwell reacted to 2fpower's post in the thread Builds Do I have your attention.... I call it VERA. with Like.
Did a bunch of shrinking and beating on the back edge to get it round again, and get rid of a butt dent, then tacked a reinforcement bar across to prep for the cut and addition of 3" stretch.... here is the planned cut. while the torch...
-
bwell reacted to nwfl4runner's post in the thread What have you done to your 200 Series this week? with Like.
Tire/fridge rack back from powder, and got a chase rack style tire strap holding it nice and snug. Need to test it out to see how the factory tie down nuts work, or if I need to use sandwich plates for strength. Time will tell.
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
-
Loading…