What have you done to your 100 Series this week? (133 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

More of a “for” rather than a “to”, but it’s new bedroom is almost complete. Just interior stuff left.

Also trying to decide what color to paint the bumpers. They have a bunch of scuffs on the corners that I want to take care of. I'm thinking either white to match the rest of the truck, or do a darker silver (similar to rims on 06 and 07's) and paint the trim and rims to match the silver.

View attachment 1852532
I am thinking of build one very much like that, with single door. Would you please giving some detail and cost?
 
I am thinking of build one very much like that, with single door. Would you please giving some detail and cost?

recently build a toy garage. best thing I did was scissor the trusses. 10 foot ceilings go 18ft in the middle and you can then use a full size 2 post lift, lift is 12k lbs and made by revolution. $4k installed. have to pour floor 5-6" thick vs the normal 4".

Also wired switches to outlets so can install as many LED lights as needed. I bought from costco.

I also finished walls so ran Max air tubing to wall and then to compressor.
 
Two weeks ago I trashed my trailer harness at Rausch. I am very thankful that my husband takes me wheeling, watches me break expensive stuff, and then replaces parts without giving me any grief.

He must be a keeper.
IMG_20181212_161101317.jpg

@beno
 
Two weeks ago I trashed my trailer harness at Rausch. I am very thankful that my husband takes me wheeling, watches me break expensive stuff, and then replaces parts without giving me any grief.

He must be a keeper.
View attachment 1852799
@beno

:lol:

We will need to address the crushed resonator as well at some point. :lol:
 
from where?

Newark to San Francisco the the "from where?" of the drive.

Pick and Pull is the "from where?" of the headliner.

There's a 1998 LX470 there. It has a dash, hatch, tailgate/lights and most of the undercarriage, but the interior is gone as are the engine, the headlights, wheels, and much of the trim.

I have to go back tomorrow so if you need something specific PM me, and I'll check, but will have limited time so grabbing anything too complex from the drivetrain is unlikely.
 
installed my Dissent front bumper... it only took me most of the day after I had a not so subtle reminder about the importance of anti-seize compound on stainless hardware. During fit-up I over tightened some hardware and regretted ever second of it. This is an amazing bumper. I can't wait to save up my pennies and do a rear with swing-outs and get some of his skids. @benc

IMG_9396.JPG
 
installed my Dissent front bumper... it only took me most of the day after I had a not so subtle reminder about the importance of anti-seize compound on stainless hardware. During fit-up I over tightened some hardware and regretted ever second of it. This is an amazing bumper. I can't wait to save up my pennies and do a rear with swing-outs and get some of his skids. @benc

View attachment 1852968
I really like the LX bill bar design

What was the verdict on the UCA?
 
Two weeks ago I trashed my trailer harness at Rausch. I am very thankful that my husband takes me wheeling, watches me break expensive stuff, and then replaces parts without giving me any grief.

He must be a keeper.
View attachment 1852799
@beno
ugh, did the same on Black Bear pass two years ago and still have not replaced...the 200ish was way too much for me too stomach... @beno, hook me up!
 
Finally put new tires on mine. 275/70/18 Cooper Discover AT3
Before:
K-bcY6sCDI24mT9eyulYrAEtELwNt6g9yymHQO2JVYX9LYm-e1JmDp4NOxMXmNhbxVjfoyUV2Hkj9UTH3YwedYvzXERXRefULiCX7TtJ76YZGkel99m3VaWdFLCYNBZRgHVWYr9f2iNgKsOqkqMQN6XwWCCxZb2UFMGqBlts5cYwwAz0DEzHsYvg7xvsFjv1VDuNY8MJTHjpedRUPrWmB0rGa0btMYX4bi4WbFOu8C-cODzPHa-UnLB_Eti4e49fg9Y44fo0qcTspzN4szAUWQSud3ceasibjx6s8rAH_wJNxP_QOP1arIXVvEFOEnTnANN1RB9315jp1o5y9KKcz36ZK3DX3pdzbsslrAVBMfPOIS1VuqVdehsH2hLc1A1no6HTOwfc-auSfKZZ352aF3YBI6MxOSa7ZPVy3fNYDAYLjlq3xeJvsEittP3bS_b4RvLpsRDZODeECfXfqvm2HOza8TEB2Za4B2pM-NPkONPwcfrvl2JkH5bBDha2Uv5M8qnWXcch7W2dLxC9FLzhjVBatIHTjhUzS825q5nfJNjBPZf3gcrssQB-gViFkZZclCbcK9RwP63bnjQhLj8jgWvCdVGlr9ph5e6z-cpBzHLlrxpIThWsQaV28ON6Ufj9fHlfe32xC4G6UZjmZQ_2QLYzgg=w2254-h1690-no


After:
YbLJROsm475zl2q0Hdu0s_4hpZQam12RU7jEDXAu_nveQlINt3a2aRMuZEbzWtiNNIL0rX8OmLFlvGuLIXgqA_H7Abdh_PxH6RbZR_W5u1rIa90cVaXv5kgXyU2jRx7k78jjY5ASlFTTJDxYRlLbJ7lQKk9xU_QnhJYEF8BQZlBqMTYR7sCQf74t6uOgByn-v_ye1IajUoggCmp39lQyofLOAhTGLIU8jo70Ax2WZM6Il4TuHqRhRJoPcmqUsAeLVc5UmDb2V6J2YThgcEQpWoFNh01LrLM6j8bo0FG5BVVVMZnOQsejdp-hgAq4LeNAn1vYsGb_OsocxN20XV_PkM5_Nw0cS2C_K98UgLsFjokQQzbwi-UyOK-y7Qq5XKZ4wy03BfnGOcFVm0YRjndVOav_0u6ANoIa8Pt_XwcnyNbHz3O4mlPMKMy32MxeEWKthlNPFw9E-PjcEnIdESb1lk8BUk-rKsDSZCLVK1C0zqAPe7T9BIdEekqlKzzy6xLJhrucSi7OoOUMgDFJyaNOzw6A-EDJD2GqhutEsyteHFoE14d92y7UCDxgORsh6R6A61mN7CY9So176hM70fTEwuIA9rLJlOoY82KN8ClFRAVf_4hvVZLRwupH5VaSwjj7GBGumhzISRWMkT9qFbd3qXvETA=w2254-h1690-no


Keep us posted on those tires. Very curious about them as they are more offroad worthy than base AT3s. Seem like a good compromise between the base AT3 and the ST MAXX.
 
Newark to San Francisco the the "from where?" of the drive.

Pick and Pull is the "from where?" of the headliner.

There's a 1998 LX470 there. It has a dash, hatch, tailgate/lights and most of the undercarriage, but the interior is gone as are the engine, the headlights, wheels, and much of the trim.

I have to go back tomorrow so if you need something specific PM me, and I'll check, but will have limited time so grabbing anything too complex from the drivetrain is unlikely.


I could use the back cup holders...
 
ARB Springs and replaced rear Stabilizer links..Few weeks prior to that- AC compressor replacement and front evap core replacement.
 
Installed wits end apu. Fits great and replaces unnecessary cup holders most of us didn’t know we had.
967831E8-E6EF-4210-BF62-658CB3ED70F2.jpeg


Also ordered the big ass lower control arms from him.
They should be here soon.

Clean up the cowl under the wipers.
Gonna repaint the wipers next.
It’s s little detail but really makes a difference on these old trucks.
This stuff polished up the front bumper nicely as well. Just don’t let it on the glass for too long. It’s a pain to get off.
41E452F4-ADAE-47AE-A2FA-E063A617B255.jpeg
9A3B1CAD-B90A-46FF-8344-32CE456CC810.jpeg
12B3C74A-B248-4959-A29B-96FA767C4941.jpeg


And for the first time in 4 years of ownership,waxed her myself.
Nobody, at any price, details a car like someone who truly cares.
Not a bad looking rig considering she’s old enough to vote.
09BF3BF2-2D9C-4C43-B71B-E9905BFA5A04.jpeg
 

Users who are viewing this thread

Back
Top Bottom