ClemsonCruiser
Supporting Vendor
Cool glad it worked out, he is a good kid. You check out his 62 with the locked 80 axles?? Pretty sweet
What did you do with your truck this week?
- Thread starter BMThiker
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Cool glad it worked out, he is a good kid. You check out his 62 with the locked 80 axles?? Pretty sweet
Checked out all the fluids in the 60, cleaned out and re-organized the storage box and got it ready for this weekend!
ClemsonCruiser
Supporting Vendor
You anchor that ballistic missile I mean storage box down yet??
ClemsonCruiser
Supporting Vendor
New clutch in the 45, also replaced the rear main and pilot bearing....
jfz80
Cruisin’
Ahh to have a removable trans tunnel. Looks good
Front axle tear down here. Bearing repack and a birf rebuild and replacement.
Front axle tear down here. Bearing repack and a birf rebuild and replacement.
- Thread starter
- #2,406
My Diehard Platinum w/4yr warranty died after 15 months service. Went to Sears and got a brand new replacement. I'm not having luck with batteries.
Raptor Bedliner
On Marshall's recommendation, I used "Raptor" tintable bedliner to line the bed of my Stout this weekend. GREAT product!!! For about $100, I got four quarts of liner, a quart of hardner, and a spray gun for my compressor. After a morning of light sanding and cleaning (and taping/blocking with brown paper), I applied the liner in two coats. Looks as good as Rhino-Liner and saved about $300.
Kudos to the Trollhole for another great recommendation. Will post pics later.
On Marshall's recommendation, I used "Raptor" tintable bedliner to line the bed of my Stout this weekend. GREAT product!!! For about $100, I got four quarts of liner, a quart of hardner, and a spray gun for my compressor. After a morning of light sanding and cleaning (and taping/blocking with brown paper), I applied the liner in two coats. Looks as good as Rhino-Liner and saved about $300.
Kudos to the Trollhole for another great recommendation. Will post pics later.
I haven't forgot ton about your carbs. If I can get past this weekend I should get to it next week and come up next weekend.
jfz80
Cruisin’
Test fit the AOE bumper. Gonna have to move my ps cooler and work on the grill to fit the warn.
Looks good.
I swapped side doors on the van, getting a little less creeper everyday. Hope to update build thread and pics soon. Now if I could only get the engine buttoned up so I can drive it again lol.
I swapped side doors on the van, getting a little less creeper everyday. Hope to update build thread and pics soon. Now if I could only get the engine buttoned up so I can drive it again lol.
Changed the springs on the front of the cruiser. No more stink bug stance.
Pics of Raptor liner
And the photos .....
And the photos .....
Pic2
Inside the bed
Inside the bed
That bumper rocks. Are u going to paint or leave it?
jfz80
Cruisin’
David that's a beautiful truck but someone has tarnished that beautiful red classic with some baby blue graffiti. Ruins the whole look 
Thanks Kevin. Kinda digging the raw look but not sure what prepping it will do to the metal. There is a matte clear powder available or it may just go back to gray.
Thanks Kevin. Kinda digging the raw look but not sure what prepping it will do to the metal. There is a matte clear powder available or it may just go back to gray.
Jason- all I can say is that I did not go there on an athletic scholarship
Water pump or hoses around the water pump?
Mine would only leak when the temp would drop in the teens.
Mine would only leak when the temp would drop in the teens.
I rescued people and realized my tires were at 50%-30% and so I got new shoes (285/70R17 Duratracs)
