After 2.5 months, finally finished the 2H conversion on my FJ62, I guess now my HJ62.Loving the diesel!
Yeah!
What did you do with your 60 this weekend? (11 Viewers)
- Thread starter MrMoMo
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Yeah!
RodrigzCrzr
SILVER Star
Replaced oil Cooler top tube
And isolator for bottom radiator hose tube
Couldn't resist just bought lower radiator tube.
And isolator for bottom radiator hose tube
Couldn't resist just bought lower radiator tube.
Last edited:
brian
SILVER Star
replaced my old 33x9.50s with 10.5s.
- Joined
- Jun 21, 2011
- Threads
- 233
- Messages
- 21,799
- Location
- Redding, California
- Website
- trail-tailor.com
Tag which RTT is that?
Installed new too me passenger seat BMW sport seat e30 model. Torfab seat adaptors. Wicked easy mod! Next weekend I will power up the seats.
Laid down the Monstaliner and got it all put back together today.
How much monstaliner you use for that mod? Looks sharp!
Cleaned it out a little and some little maintence, then took it off road for the first time. Im impressed.
- Joined
- Jun 21, 2011
- Threads
- 233
- Messages
- 21,799
- Location
- Redding, California
- Website
- trail-tailor.com
Installed the window lock strip, finished the sliders, installed the awning and started a new front bumper
J
J
I bought the 2 gallon kit in Medium Quartz Gray and had just a bit left over when I was done. 1 gallon covered 2 coats on the ceiling and one coat in the trunk. Second gallon was used for 1 coat in the foot wells and rear seat and a second coat all over the floor.
ARB Simpson III
Fj moneypit
Cubic Zirconia Member
Those welds are beautiful!
MicahMan
TLCA 20925
Built some shackles and installed a working spare tire bracket.
These are stock shackle pins from new oem
Shackles from cruiser outfitters and I pressed then into extended plates. Gave me 2 inches.
then put led lights from www.ironmoose4x4.Com
Then hung out at a tread lightly training
These are stock shackle pins from new oem
Shackles from cruiser outfitters and I pressed then into extended plates. Gave me 2 inches.
then put led lights from www.ironmoose4x4.Com
Then hung out at a tread lightly training
Played outside a little. This is about 10 min from my house.
Woke up to Snowfall on Saturday, and watched it melt 3 hours later. Still too cold to replace the pax side axle seal and button everything back up since it was -8 today.
it will be 45 tomorrow so looks like a mental health day/work on the LC/do something for the wife's BDay tomorrow.
it will be 45 tomorrow so looks like a mental health day/work on the LC/do something for the wife's BDay tomorrow.
What started as a half spilt bottle of injector cleaner turned into this weirdly quick. Still happy I did it, foun da couple patches of rust (still what appears to be surface) and a couple other things that would be nice to attend to. Going to paint and re-insulate as well
Also found some time Friday to make some progress on the sliders
Also found some time Friday to make some progress on the sliders
Got it aligned and had the wheels ballanced. Then took it home and found that the minor coolant leak that had started the week prior had developed into a serious one. Found a crack in the top radiator tank. 
...not looking forward to removing that thing
...not looking forward to removing that thing
wife grabbed the compressor and blew out the under-body while I removed the intake/exhaust manifold in prep for a gasket swap and desmog. also think I will have some questions about leaf spring replacement in the near future....
