What did you do with your 60 this weekend? (12 Viewers)

[Skreddy]

Went hunting and got some pics. I’m really happy with my OME and Bilstein combo; rides almost as smooth as my 04 4Runner did. Some buddies with 4 door jeeps were envious of the ride.
Over 500 miles round trip and the 5 speed hums along happily at 75 and 2500 rpm.

 

[BHillteq]

Went to Cruiserfest!

 

[jesus888]

You got that right... he and I both!!!

Since I’m not willing to pay $175/wheel for powder coating… went ahead with the original plan and primed/painted these FJ cruiser 17” steelies myself. There’s a bunch of trash and runs, but they’re actually going on the 1st gen taco truck I bought recently and that truck will be living at the cabin and will be outside…

 

[adamsfly]

Rebuilt my carburetor. I think I found my fuel delivery problem That mesh screen on the inlet is about 80% plugged with crud, the image is the clean side. Plus there was crud in the bowl. That adds up to poor performance.

 

[Paullus]

Rebuilt my carburetor. I think I found my fuel delivery problem That mesh screen on the inlet is about 80% plugged with crud, the image is the clean side. Plus there was crud in the bowl. That adds up to poor performance.

View attachment 3427790View attachment 3427791View attachment 3427792

Wow that screen is pretty dirty. If you still have any trouble with seeing enough fuel in the sight glass don't forget that the needle valve can get stuck - even a new one. A few taps on the outer part of the carb where it is located with a wooden or brass drift will knock it loose.

 

[cps432]

I popped the caps on my new wheels. Not sure if I like them as much as the chrome - likely need to get used to them before deciding.

View attachment 3424695


View attachment 3424696

They look awesome! OEM chrome looks great too, but those look great with the two tone paint job.

 

[4runner2FJ60]

Drove it and had a guy pull up to tell me my brake lights were out. I got home and found out the 40 year old brake light pedal switch decided to stop switching finally. Just ordered a new one.

 

[CruiserTrash]

Drove it and had a guy pull up to tell me my brake lights were out. I got home and found out the 40 year old brake light pedal switch decided to stop switching finally. Just ordered a new one.

Good time to get a brand new rubber pad - the part that the switch hits against. Available brand new from Toyota for cheap. Once that gets a big enough divot, your brake lights are always on!

 

[r71]

Put some 35s with 1.25 in spacers. It's much better stance.

 

[Jamieson22]

Put some 35s with 1.25 in spacers. It's much better stance.

What was the setup before? Regear for this?

 

[NWxDrew]

Put some 35s with 1.25 in spacers. It's much better stance.

View attachment 3430826

View attachment 3430827

View attachment 3430828

View attachment 3430829

I am having issues with those same wheels. They are rubbing on the tie rod ends when turning. I’ve been told running spacers can cause issues. But it sounds like people are doing it fairly often. Anything I should look out for if I do put spacers on my stock axles?

 

[Spook50]

Good time to get a brand new rubber pad - the part that the switch hits against. Available brand new from Toyota for cheap. Once that gets a big enough divot, your brake lights are always on!

Can confirm. Replaced mine about 7 years ago. Ordered two so I'll have a spare to pop in in 20 years when the current one wears out

 

[CruiserTrash]

New bling from Cruiser Cult for the engine bay.

Painted the D-pillar vents and the divider on the rear door windows.

Got the sliding window frames painted with the top coat. Doing satin black for now, but I might do some chrome tape over the top. When I remove the fixed cargo window glass I lose the chrome lock strips … and I love the chrome details on a 60.

 

[mccaleb77]

Began repairing a much better tailgate I acquired from a fellow mud member.
Bumper is going away and being replaced by a Proffitt’s swing out that came with the 60.

 

[chelo]

I've been busy but mocked up my Bellows and going to weld these later tonight. Should be good for tomorrow

 

[4runner2FJ60]

Good time to get a brand new rubber pad - the part that the switch hits against. Available brand new from Toyota for cheap. Once that gets a big enough divot, your brake lights are always on!

I ordered that as well, but thanks for the heads up! I wonder how long I have been cruising around without brake lights? I ordered a reverse light switch as well for when the time comes.

 

[kirvesmies]

I've been busy but mocked up my Bellows and going to weld these later tonight. Should be good for tomorrow

View attachment 3431786

View attachment 3431789

yeah, after seeing this, i'll not be posting up pics of my exhaust work, the redneck thread over in chit chat is a better spot. nicely done

 

[chelo]

yeah, after seeing this, i'll not be posting up pics of my exhaust work, the redneck thread over in chit chat is a better spot. nicely done

If it makes you feel better, it's leaking at the cheapy flange. Sounds good though.

 

[kirvesmies]

If it makes you feel better, it's leaking at the cheapy flange. Sounds good though.

i'd like to see the whole system when it's done. or some in a build thread

 

[BG_TX]

Got it a stable-mate.