What did you do with your 60 this weekend? (27 Viewers)

[GeologistFelix]

I know its early, but are you getting any noise from the poly bushings yet?

I put about 60 miles of offroad and 300 miles of pavement on the new springs since I put them on. So far, they're nice and quiet, but maybe that's only compared to the beaten-to-hell old bushings? Definitely seems quieter on bumps that ever before, though.

 

[Silveredition]

Did an oil change, changed fuel filter, cleaned underneath, then spent a couple of hours chilling out on the beach....

 

[heidtman79]

I completed my right of passage! KNUCKLE REBUILD!!!

Also replaced my rotors, pads, break lines, new tie rods & alignment, new heater hoses & coolant flush. Oh, and I put in a new fan clutch.

Thanks @beno and @cruiseroutfit.

Now just sitting back and enjoying some refreshments.

 

[TLC Norway]

Here's from a few weekends ago, happy trails in Finland:

 

[4Cruisers]

Pulled the wiring harness from my '89 FJ62 to get it ready for installation in my '86 FJ60 project:

After that, pulled the firewall insulation pads and cleaned them up. I should have already known, but was pleasantly surprised to discover that the penetration for the clutch is already there from the factory. So it should swap right over.

 

[nmcbride89]

Finally got my tail light working (can now pass inspection, so I will be officially legal this week! ). I am assuming the PO used the aftermath of a dumpster fire as a wiring diagram to install trailer lighting and the tail light splices finally gave out...

 

[tmxmotorsports]

Went to corova beach today hung out on the beach for a while took some family friends back to boat ramp snapped some pics behind the dunes of #roughcunt also got hit in the lip with a damn frizbee in the mouth by #fxxxitupchuck didn't bleed but sure enough busted my lip

 

[POTATO LAUNCHER]

Changed the oil. Corrected "death wobble" with appropriate caster shims. Pulled it out of the garage for a family photo.

 

[freepowder]

With the '60? Nuthin'. I did go to the destruction derby at the County Fair in Durango, CO though.
Highlights: A Honda Civic took third place overall. A 80-something 'Burb was winning when he hit a Ford pickup and rolled on his side. Naturally I have no pictures of any of this.

 

[mcguirejohnson]

Changed the oil. Corrected "death wobble" with appropriate caster shims. Pulled it out of the garage for a family photo. View attachment 1306601

Nice rigs! I see your in Amarillo, Im going to Tech in Lubbock. Didn't think there are many cruiser guys up in the panhandle..

 

[Cruiserdrew]

Did the Dusy Ershim Trail over 4 days. Virtually no one was on the trail. We saw 5 Jeeps on day 3, and no one else. First pic is right on the shore of Courtright Lake. Middle picture is our day 2 camp. Last pic is above 10,000 feet and above the treeline. Best trail ever.

 

[POTATO LAUNCHER]

Nice rigs! I see your in Amarillo, Im going to Tech in Lubbock. Didn't think there are many cruiser guys up in the panhandle..

There are a few up here. Most of us know who and where they are.

 

[nohermosa]

Went on a 2 day trail ride to Cooke City, Montana this weekend with our local club 406cruisers. Awesome trip with great people!
Check out more pictures here.

@406cruisers on instagram and facebook

 

[jamesg]

Potato Launcher, just a reminder, stay upwind of the Pantex plant, LOL

Changed the oil. Corrected "death wobble" with appropriate caster shims. Pulled it out of the garage for a family photo. View attachment 1306601

 

[4Cruisers]

Potato Launcher, just a reminder, stay upwind of the Pantex plant, LOL

I'd be more concerned (from the immediate effects) with the feedlots.

 

[jamesg]

I'd be more concerned (from the immediate effects) with the feedlots.

Prompt and immediate.

 

[jamesg]

Especially if the FNADs are positive!

 

[POTATO LAUNCHER]

Potato Launcher, just a reminder, stay upwind of the Pantex plant, LOL

If it goes I doubt we have a chance to even worry about it.

 

[Godwin]

View attachment 1306738

What's with the spring pack on the bull bar?

 

[Cruiserdrew]

Spare front spring. A broken main leaf on a remote trail sucks. The rears are heavier duty Chevy springs and I'm not as worried about them. I've lent one to a guy at Rubithon 3 years ago, and this year I needed to pull a set of bushings out to repair a front set that turned to powder on the trail leaving the spring banging around in the hole.

What's with the spring pack on the bull bar?