Warn 8274 tear down and rebuild videos finished.

[lshobie]

Hi Guys, I have just completed the second in a series of 5 or six warn 8274 winch videos. So far I have the complete tear down and reassembly of the 8274 done, the others will include installation, rope installation, my modifications, and albright solenoid install. Have a look if you like:

Video #1 Complete tear down

[YOUTUBE]WXLnAqgRpFE[/YOUTUBE]
Video #2 re-assembly

[YOUTUBE]AetCZJxvNdU[/YOUTUBE]

Thanks for watching and don' forget to subscribe!

 

[lovetoski]

wow! I think I've watched every one of your how to video's. Rebuilt my spare aisin hubs as a result. Will do my 8274 this winter...after seeing all of your rebuild segments. pictures are worth a 1000 words, and video is worth 10x a picture.

 

[DanS HJ-45]

Awesome Louis!

Watching that tells me that I really ought to rebuild our 8074.....

Dan

 

[Cruiserdrew]

Very fine job. Makes it looks easy! Wish you had done this before I rebuilt mine. I may have to go back and seal the motor.

 

[REZARF]

Awesome Louis!

Watching that tells me that I really ought to rebuild our 8074.....

Dan

Dan-

I rebuilt an 8074 and it was just a little different but nothing that an 8274 tutorial wouldn't cover.

Drew

 

[MatthewMcD]

Resurrecting to provide updated links and say "Thank You" these are the most concise rebuild videos I have watched.

Disassembly

Assembly


Mounting (Warn 8274 winch rebuild series #3, Mounting the 8274 winch - https://youtu.be/kPISmebrA_Q?si=q6P3Hik7ZOuqG4Lp)

Albright Solenoid (Warn winch rebuild video #4, Albright solenoid install - https://youtu.be/4hc3sCakVi8?si=f92F-Gt4U-lIwYps)

 

[pb4ugo]

I found the thread below very helpful. Also following the links in it, and watch just about every video available. I tried to assemble the brake several time like in the video and struggled keeping the balls in place. I found either a video or a write up using either a large bolt or threaded rod vertically in a vise and used it as a press to get the 2 halves together, then using small clamps to hold it together and installing on the shaft.

My WARN 8274 rebuild part 1.....

Bought this Warn 8274 new in 1983 and have been using it pretty hard the last 24 years. Recently I decided to split the case, change the oil, and install fill and drain plugs (something I’ve been meaning to do for years). As you can see…it was in dire need of some TLC, but it was still...

forum.ih8mud.com

 

[pb4ugo]

Here ya go, post #5. For easy brake assembly.

Warn 8274 - Rebuild and Brake Assembly

G'day Guys, I picked up an old Warn 8274 winch a few months back which I have rebuilt. During the rebuild I worked out a method of putting the brake back together that might save a bit of frustration. My first attempt was less than successful. I put the main shaft into a vice, put one half...

forum.ih8mud.com

 

[MatthewMcD]

Here ya go, post #5. For easy brake assembly.

Warn 8274 - Rebuild and Brake Assembly

G'day Guys, I picked up an old Warn 8274 winch a few months back which I have rebuilt. During the rebuild I worked out a method of putting the brake back together that might save a bit of frustration. My first attempt was less than successful. I put the main shaft into a vice, put one half...

forum.ih8mud.com

Sadly, I tried the "free stickers" from support. nope! $50-$70 for stickers... boo.

 

[gnob]

Sadly, I tried the "free stickers" from support. nope! $50-$70 for stickers... boo.

collins bros jeep for stickers

 

[DuckLN]

Sadly, I tried the "free stickers" from support. nope! $50-$70 for stickers... boo.

Yea-thats yankee crap