kick A$$
Builds Tube Chassis Cruiser Project
- Thread starter cruiserrg
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
That is what I am talking about!!
Eskimo
SILVER Star
Absolutely sick!!!!
I don't even want to see a side shot to see what the underside looks like with ~30" of underbelly clearance... with no links or anything hanging below...
I don't even want to see a side shot to see what the underside looks like with ~30" of underbelly clearance... with no links or anything hanging below...
Awe...some
- Thread starter
- #46
Eskimo said:
Just for you..23" clearance under the flat belly which goes from inside tire edge to inside tire edge due to bend in the lower links.
18" clearance under the diffs.
I do have an air bag mounted on the top center of each diff for a center bump stop and to raise the body if I get highcentered.
Great rig!!!
- Joined
- Sep 28, 2002
- Threads
- 558
- Messages
- 8,122
- Location
- Kamloops, BC Canada
- Website
- www.shopraddcruisers.ca
Bar none top quality.
Do you have a shot of the air bags?
Do you have a shot of the air bags?
- Thread starter
- #49
Radd Cruisers said:
Here are a couple shots before teardown for paint:
- Joined
- Sep 28, 2002
- Threads
- 558
- Messages
- 8,122
- Location
- Kamloops, BC Canada
- Website
- www.shopraddcruisers.ca
Very Very nicely done, your gonna have a lot of fun in that buggy.
When do you think your ETA is on your rig?
Also, could we exepect to see you at a cruiser run with it?
I have only been to one event but would work hard at getting to one if you ran your buggy at an event.
Look forward to your shake down run and impressions.
When do you think your ETA is on your rig?
Also, could we exepect to see you at a cruiser run with it?
I have only been to one event but would work hard at getting to one if you ran your buggy at an event.
Look forward to your shake down run and impressions.
- Thread starter
- #51
Radd Cruisers said:
Thank you. ETA is hopefully August. I was gonna try for Memorial weekend, but I am moving soon and logistically won't work.
I may take it on a cruiser run, tho it would have to allow non-street legal rigs.
I am sure I will have a ton of fun with it, just curious what I will break first.
i love that airbag idea. Keep up the good work
- Joined
- Sep 28, 2002
- Threads
- 558
- Messages
- 8,122
- Location
- Kamloops, BC Canada
- Website
- www.shopraddcruisers.ca
How goes the battle?
It is nice weather and if your like me Im building a deck, just to keep out of the dark dingy garage.
It is nice weather and if your like me Im building a deck, just to keep out of the dark dingy garage.
dang.....lookin pretty frickin sweet.
malphrus
malphrus
- Thread starter
- #55
The battle is going slower than usual, as I am moving back to MN. Been on the road for 2 weeks straight working out there, while selling my place, looking for a new one, and moving some of my crap into storage out there.
So cruiser is going on the back burner again. Good news is once I am moved in mid-June I should be able to finish this thing and have ready for August wheelin.
So cruiser is going on the back burner again. Good news is once I am moved in mid-June I should be able to finish this thing and have ready for August wheelin.
Looks awesome Reuben. 
Mankato is his new home, effective June 20th or so.....
- Thread starter
- #59
yep, close on my new place in Mankato, MN on June 20th. I grew up in that neck of the woods, and will be fun to be back wheelin' with my first 4x4 club...River Valley Off Roaders.
cruiserrg said:
Now that's pretty outside the box. Very cool. When you get a chance, could you get a couple of pics of the links mounted on the axle? Thanks.
