Builds Trail Tailor- Custom Armor Build plus a few things (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Yeah just a strip of bulb seal or felt chair leg pads work too.

J

With the door seal, is there really a purpose for the flap that I should put it back? I understand the stock cargo area without drawers allows you to slide things in and out easier.
 
That's about it.. Its a cosmetic/vanity thing.

J
And it covers the gap so when I inevitably drop stuff, it doesn't fall through.

As others said, it is easily modified with some rubber trim to slide over the latches. I also used a razor knife to slightly chamfer/ease the underside of the trailing edge in that area where it meets the latches.

It works well.
 
LX570 HWM 2012-15 model

IMG_20200521_145833312.jpg

IMG_20200522_123020525_HDR.jpg

IMG_20200522_123041400.jpg

IMG_20200522_123054303.jpg
 
Are you planning on hooking up those mini-suns in the middle to their own switch, or tapping into reverse?!

That's my 200....Current plan is to tie into my switchpro that has an open circuit
 
That's my 200....Current plan is to tie into my switchpro that has an open circuit
Check out my recent post or reach out. I have mine working with both reverse trigger (can be turned off with the switchpros) or triggered manually with the switch or Bluetooth phone app.
 

Users who are viewing this thread

Back
Top Bottom