Toyota OEM Spring Options and Specifications (1 Viewer)

[gluaisrothai]

I used two of the 4813160D60 coils. Everything went in as it should and performs as it should. With the 10mm spacer the truck has settled at 20 inches hub-to-fender.

I did the math on the weight, and I arrived at 450ft/lbs for spring rate. I don’t believe that to be accurate. I believe it still to be 500ft/lb.

Thanks! What was your hub to fender with the stock springs (and with/without spacer)?

500 lb/in seems lower than expected. Is that the actual spring rate or the effective rate at the wheel?

Best,
Ken

 

[bloc]

Stock URJ200 is 500#/in for the fronts

 

[gluaisrothai]

Stock URJ200 is 500#/in for the fronts

Oh…do you think the diesel/winch springs have the same rate as the gas version but just a longer free length for more preload? I would have expected a higher rate.

 

[bloc]

Oh…do you think the diesel/winch springs have the same rate as the gas version but just a longer free length for more preload? I would have expected a higher rate.

I would have expected a higher rate as well. Just reporting what I had learned while going through the process of choosing suspension for my rig.