The 2H/12H-T/1HZ/1HD-T/1HD-FT Gturbo Alternative Tech Thread (10 Viewers)

[lean2lux]

Yep the boost is plugged. No exhaust leaks. One thing I could do is put some RTV on the intake manifold to make sure there's nothing leaking there.

 

[Stephan Mester]

410Nm / 129kw!!!

You can read and see my set up and results here:

1HD-FT after market Turbo set up

Good day, cause of this massive thread in this forum section I post separate my after market turbo set up which is working. I purchased following hardware: ( I do not promote or get any discount from this supplier!) My car has a front mount intercooler,3 inch exhaust, Snorkel and K&N filter...

forum.ih8mud.com

 

[Dougal]

410Nm / 129kw!!!

You can read and see my set up and results here:

1HD-FT after market Turbo set up

Good day, cause of this massive thread in this forum section I post separate my after market turbo set up which is working. I purchased following hardware: ( I do not promote or get any discount from this supplier!) My car has a front mount intercooler,3 inch exhaust, Snorkel and K&N filter...

forum.ih8mud.com

That's about 1999 stock 1HF-FTE power/torque but you're also smokey. Why are you running such low boost?

 

[Stephan Mester]

because the engine has 430thsd km on its clock!
why should I squeeze more out of it?
It runs good as it is and has decent torque and power.
No reason for me to get more as it is now

Here in South Africa the engines are rare and a complete rebuild is pretty expensive

 

[bj70bc]

bit more boost = less smoke + less egt

 

[KiwiDingo]

If you think a stock 1hdfte makes that much power / torque on a dyno you're very mistaken! They can after tuning but absolutely not in stock form

 

[Stephan Mester]

My EGT are fine, running low.
Boost maybe, the actuator I use is not acurate (Mamba rubbish!)
I pushed the car up on the local mountains here without getting worried about high egt´s
And I can easily overtake a slower car now.
As I said, its ok for now, much better what I had befor

 

[Dougal]

My EGT are fine, running low.
Boost maybe, the actuator I use is not acurate (Mamba rubbish!)
I pushed the car up on the local mountains here without getting worried about high egt´s
And I can easily overtake a slower car now.
As I said, its ok for now, much better what I had befor

You are smoking which fills your oil up with soot. A retune with more boost and less aggressive boost compensator will be much, much, kinder on your engine.

Where is your EGT probe and does it reach mid-stream?

 

[antsmith29]

Hi guys, I've installed an arashi td05-16 large on my 1HDT and it's seems awfully slow to spool, doesn't hit full boost of 19psi (I've installed a boost tee.) Till after about 2100rpm and even drops boost between 3rd and 4th which cause egts to spike up. Max egts under load on a hill are about 685 pre .
I've done injectors 3 inch exhaust and big end bearings recently. Any ideas please?

 

[AussieHJCruza]

Hi guys, I've installed an arashi td05-16 large on my 1HDT and it's seems awfully slow to spool, doesn't hit full boost of 19psi (I've installed a boost tee.) Till after about 2100rpm and even drops boost between 3rd and 4th which cause egts to spike up. Max egts under load on a hill are about 685 pre .
I've done injectors 3 inch exhaust and big end bearings recently. Any ideas please?

What exhaust housing and turbine wheel do you have?

 

[antsmith29]

What exhaust housing and turbine wheel do you have?

8cm2 and 12 blade