The previous owner left us a nice little surprise that we discovered last night. When we got the 60, the PO said he just changed all the oil in the transfer, transmission, and diffs....so it was lower on our priority list of things to check. Mike had noticed some very minor weeping of oil around the bottom of the transfer for a while. So we decided to change all the gear oil last night. When unscrewing the transfer filler plug, it was barely screwed down. Turns out the filler hole threads were completely stripped and not sealing it properly....and barely holding the filler plug in place!
Seems pretty serious, like defiantly something you would want to be on there tight! This is pretty uncharted territory for us, so we are open to any and all suggestions on how to fix this. I really appreciate any advice on how to proceed.
Seems pretty serious, like defiantly something you would want to be on there tight! This is pretty uncharted territory for us, so we are open to any and all suggestions on how to fix this. I really appreciate any advice on how to proceed.