Starting a HJ45 after 17 years

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

My local auto parts store had the fuel filter in stock... he had to order the air filter... be in tomorrow. He couldn't find any info on the oil cartridge... even couldn't find Toyota making a 3.6 diesel..lol. I have not changed oil yet, i'll do that here friday. I was planning on using Rotella since thats what i have used for 15 years in my dodge cumins... you guys think thats ok?

Also...if someone could tell me what cartridge oil filter to get i would appreciate it.

Thanks
 
it is a 2h right?
Napa Gold Oil Filter 1627 - Cross from LF3399 and Toyota 15601-68010
Rotella is good oil...
 
even if the bugger doesn't run the first time, keep videoing...makes the starting all that much more sweet...
 
No, I havent started it up yet...been waiting on the correct oil cartridge. Daniel @ Wimberly 4X4 outside of Austin had them in stock so i made a trip up there last saturday and picked up 2 of them. Super nice guy & extremely helpful with all my thousands of questions!

Drained the oil last weekend, pulled the glow plugs, did the mystery oil in the cylinders, Ohmed out all the glow plugs (all were good), installed a new battery & changed fuel filter. I noticed that when i rolled the key from "off" to the "Accessory" position, that nothing happened...no lights at all on the dash. I found what looks like a 10awg black wire that was broken close to the battery so i temporary attached it to the + terminal. Now when i turned the key to the "Accessory" position, all the lights on the dash came on.

Since i still had the glow plugs out and i now had power to the truck, i decided to see if the started would spin ( i had already hand turned the crank to make sure it wasent frozen). Cranked on the switch for a few seconds and low & behold, it spun very easily and i was getting little puffs of smoke/Myster oil shooting out of all the glow plug holes.

Work lately has kept me from working on it every day but i plan to reinstall the tank this weekend and try and fire it up. :cheers:
 
D'Animal said:
Fixed it.




:popcorn: :popcorn: :popcorn:


I'm exited and it is not even my rig.

FluffyBunnySui must not be able to sleep at night.
Click to expand...

x2.

He's probably got it started and is out and about cruising it all around the town....

(at least, that's what happened in my mind)

Dan
 
Im guessing it didnt turn out to be the barn find of the century.:rolleyes:
 
I see his engine starting OK but then disaster striking!

His tie (Yes - I see him wearing a long bright-yellow tie) gets caught around his crank pulley and gradually pulls him down into his engine bay where he meets a grissly end.

:skull: RIP

(And I'm a registered clairvoyant here in NZ with a 78.6% success rate.)
 
You must log in or register to reply here.

Similar threads

M
New to me 1978 HJ45
Replies
6
Views
694
duncanrm
duncanrm
duncanrm
FAQ HJ45 2H Conversion - Guide
Replies
1
Views
812
Greek Cruiserhead
Greek Cruiserhead
S
1hd-fte hard start after fuel filter replacement
Replies
6
Views
901
bj70bc
bj70bc
Mikeybro
FT: Almost stall after Hard acceleration.
Replies
5
Views
761
Mikeybro
Mikeybro

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)

Share this page

Back
Top Bottom