@orangefj45 would this kit work with an auto? I have a vacuum shift, automatic 70 series that i'm thinking about converting to manual and twin sticking
split case twin-stick kits!!!!! (2 Viewers)
- Thread starter orangefj45
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
orangefj45
Supporting Vendor
- Thread starter
- #162
The case would need to be disassembled ........ but yes, our “doubler” kit will work; it’s designed to be used with autos or double Tcase setups.
We can supply the twin stick kit, manual conversion and any other Tcase parts.
Georg @ Valley Hybrids & Cruiser Brothers
We can supply the twin stick kit, manual conversion and any other Tcase parts.
Georg @ Valley Hybrids & Cruiser Brothers
shipmag
Hagler Technology LLC. Aka Shipmag
I have a shift plate with an FD pull out for 4 speed and 5 speed if your interested. Sorry for stealing the thread Georg
bcsteel
SILVER Star
Pm sent
Will Van
GOLD Star
Hey Georg @orangefj45, I'm in the middle of my linkage install, and need a little help.
Do I need to shorten the 2-4 link? Is it supposed to be welded to the pivot block once you get it mocked up?
Here is how I positioned the heim joints at the t-case.
Do I need to shorten the 2-4 link? Is it supposed to be welded to the pivot block once you get it mocked up?
Here is how I positioned the heim joints at the t-case.
Hey,
Just a quick FYI for anyone considering buying this kit...
Be aware it only fits the H55F from a 75 series... NOT the factory 60 series. I purchased 3 of these kits and had them shipped to Australia and of the 7 H55F gearboxes i have here (1 from a 40 series, 5 from 60 series (both manual and vacuum operated) and 1 from a 75 series) it only fits the 75 series.
The major difference is the 75 series have the mounting stud on the side of the gearbox that this kit uses whereas the 60 series (and 40 series) versions do not. If you are buying a new H55F it will be the 75 series version so will fit, but if sourcing a genuine 60 it won't.
Ill try and post up some pictures later.
Oh and for what its worth the kit did look well made and seems to work nicely on 75 series box, just a shame i couldn't use the other kits on my other 60 series cruisers.
Cheers
Just a quick FYI for anyone considering buying this kit...
Be aware it only fits the H55F from a 75 series... NOT the factory 60 series. I purchased 3 of these kits and had them shipped to Australia and of the 7 H55F gearboxes i have here (1 from a 40 series, 5 from 60 series (both manual and vacuum operated) and 1 from a 75 series) it only fits the 75 series.
The major difference is the 75 series have the mounting stud on the side of the gearbox that this kit uses whereas the 60 series (and 40 series) versions do not. If you are buying a new H55F it will be the 75 series version so will fit, but if sourcing a genuine 60 it won't.
Ill try and post up some pictures later.
Oh and for what its worth the kit did look well made and seems to work nicely on 75 series box, just a shame i couldn't use the other kits on my other 60 series cruisers.
Cheers
shipmag
Hagler Technology LLC. Aka Shipmag
Ive got shift plates for that. $23 for mudders plus the ride and i think thats $35 to Australia
Pm me if your interested.
Hey Georg, just skimmed through the thread to see if you did but didn't see one, but do you have a pic of all the parts layed out for inventory purposes? I found a few parts in a box of the kit you sent me years ago (lotsa surface rust, ugh), but I still suspect my ex threw a lot away when she vacated the house, so I want to find out what pieces I'm actually missing and which ones I have may not be serviceable. I'll be having @torfab swap in the H55F I bought from you (finally!) hopefully late spring or early summer, and want to make sure I'm giving them the complete twin stick kit when I take all my parts to them. Worst case I'll order a new kit from you and junk what's remaining of the kit I have, but hopefully I can avoid that.
Last edited:
Hey Georg @orangefj45 just a quick bump. I'm scheduled to take my 62 to Torfab at the end of April for the conversion. Looks like the tcase that came on the H55F I bought from you is a late 60 case.
orangefj45
Supporting Vendor
- Thread starter
- #170
Call me ..... you have my number.
Georg @ Valley Hybrids, Cruiser Brothers & Long Range America
Are prices still the same? I'm interested in a twin stick for a manual split case with a doubler.
Are you still selling these?
If so, I'll take one.
orangefj45
Supporting Vendor
- Thread starter
- #173
Yes sir, we just sold 3 sets in the past week.
Georg
Georg
orangefj45
Supporting Vendor
- Thread starter
- #175
The "instructions" are in this thread. Shipping is $20.
Please call the shop to place your order.
Georg
shop 209-475-8808
Please call the shop to place your order.
Georg
shop 209-475-8808
Bumping this up, anyone install this kit from Georg with a 5.3/ 4L60 / split case?
If so, I’d love to see some pics!
Cheers
If so, I’d love to see some pics!
Cheers
This is my plan. Hope to have it done before late August.
orangefj45
Supporting Vendor
- Thread starter
- #178
Did you look thru this thread? I thought I’d posted a few pics.
Georg @ Valley Hybrids
Hi Georg,
Yes sir, plenty of pics, and the mechanic that is working with me (and I) got a bit confused for a bit, but all is understood now. Nice kit!
Have a good one!
orangefj45
Supporting Vendor
- Thread starter
- #180
Glad you got it figured out.
And thank you for the support!
Georg @ Valley Hybrids
And thank you for the support!
Georg @ Valley Hybrids
