Random WTF Pig For Sale Thread (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

RUSH55 said:
I’m a little surprised to see that rig on FB Marketplace and not here in the classifieds since both the current owner ( @RMPIPE ) and previous owner ( @inkpot ) are members of IH8Mud.
Used to be an AZ rig up until the 20-teens. If it had a fault, it’s that it was(is) sky-high, and nearly tipped on every outing that I was present. Never did though.

And yes, it has a Ranger. Don’t recall if it’s OD or UD.

Here’s some pics from 20+ years ago.

View attachment 3882742

View attachment 3882743

View attachment 3882744

View attachment 3882745
Click to expand...
Well dog gone it… if the owner is a member here… I feel bad now.
 
Old Nick said:
Well dog gone it… if the owner is a member here… I feel bad now.
Click to expand...
Don’t feel bad hacked is hacked. All rigs have a place and use but price wise have to be realistic to what it is.

There was a classified add on mud in march 2024 with that pig that shows it as sold for 13,500 now on fb for 24,000 so maybe someone thought they could flip it
 
Last edited:
sofj45 said:
Don’t feel bad hacked is hacked. All rigs have a place and use but price wise have to be realistic to what it is.

There was a classified add on mud in march 2024 with that pig that shows it as sold for 13,500 now on fb for 24,000 so maybe someone thought they could flip it
Click to expand...
Well that makes sense then. RMPIPE no longer has it. New owner thinks he’s going to double his money!
bobm said:
What about the angle iron shackles. You know that's a failure point 🤔🧐😲😳🤪
Click to expand...
Definitely not the most aesthetically pleasing design, but have been on there for over 25 years. Pretty safe to rule them out as a failure point.
 
archie73 said:
My favorite was the low hanging exhaustAll that work and it’s 6” below the frame.
Click to expand...

That’s for the air cooling, which obviously works, or else the rubber line from the rear diff would have long ago burned.

IMG_7160.png
 
WarDamnEagle said:
Speaking of "patina", here's one for all the "preserve as is" fans.

Pardon Our Interruption...

www.ebay.com
Click to expand...
I think that dude is on here somewhere. Don't know his username. He was being discussed in one of the other tech threads; and a few people weighed in to say that he's a stand-up fellow. Never interacted with him, but that price tag... :oops:.

I'm going to be pulling parts from a couple of Piggies that I found locally. One has an original, unbroken tailgate handle. I'm going to sell it for one million dollars... lol.
 
Last edited:
Tomba said:
maybe rename their site more appropriately to: AsswadCruisersofVA.com
Just an idea.
Click to expand...
Might be over priced for the condition but Jonas is a great guy. He’s young-ish and started a full time Land Cruiser business restoring mostly 60’s and some 55’s. He has a good YouTube channel and goes around the country…mostly east coast…saving 60’s and 55’s of ANY condition for getting back on the road or for parts. His YT channel is fun as one of the first things he does is get the old F and 2F engines running usually by pulling parts from his cruiser yard. The way he”restores” trucks is to pull the best parts from his yard whether it is a full engine or a grille to replace a damaged one. He ends up with a decent looking and well running cruiser. Some of the parts would never be found if it wasn’t for him. I bought a 55 gauge cluster from him a few years ago at a decent price. I bet if someone really wanted that tailgate handle they could negotiate based on condition.
 
DTC72 said:
Might be over priced for the condition but Jonas is a great guy. He’s young-ish and started a full time Land Cruiser business restoring mostly 60’s and some 55’s. He has a good YouTube channel and goes around the country…mostly east coast…saving 60’s and 55’s of ANY condition for getting back on the road or for parts. His YT channel is fun as one of the first things he does is get the old F and 2F engines running usually by pulling parts from his cruiser yard. The way he”restores” trucks is to pull the best parts from his yard whether it is a full engine or a grille to replace a damaged one. He ends up with a decent looking and well running cruiser. Some of the parts would never be found if it wasn’t for him. I bought a 55 gauge cluster from him a few years ago at a decent price. I bet if someone really wanted that tailgate handle they could negotiate based on condition.
Click to expand...
Yes, I know of his channel. I am sure he's a decent guy but those prices...
 
DTC72 said:
Might be over priced for the condition but Jonas is a great guy. He’s young-ish and started a full time Land Cruiser business restoring mostly 60’s and some 55’s. He has a good YouTube channel and goes around the country…mostly east coast…saving 60’s and 55’s of ANY condition for getting back on the road or for parts. His YT channel is fun as one of the first things he does is get the old F and 2F engines running usually by pulling parts from his cruiser yard. The way he”restores” trucks is to pull the best parts from his yard whether it is a full engine or a grille to replace a damaged one. He ends up with a decent looking and well running cruiser. Some of the parts would never be found if it wasn’t for him. I bought a 55 gauge cluster from him a few years ago at a decent price. I bet if someone really wanted that tailgate handle they could negotiate based on condition.
Click to expand...
Wise man once said.
If you can't pay you must wait and if you can't wait, you're going to pay!
 
DTC72 said:
Might be over priced for the condition but Jonas is a great guy. He’s young-ish and started a full time Land Cruiser business restoring mostly 60’s and some 55’s. He has a good YouTube channel and goes around the country…mostly east coast…saving 60’s and 55’s of ANY condition for getting back on the road or for parts. His YT channel is fun as one of the first things he does is get the old F and 2F engines running usually by pulling parts from his cruiser yard. The way he”restores” trucks is to pull the best parts from his yard whether it is a full engine or a grille to replace a damaged one. He ends up with a decent looking and well running cruiser. Some of the parts would never be found if it wasn’t for him. I bought a 55 gauge cluster from him a few years ago at a decent price. I bet if someone really wanted that tailgate handle they could negotiate based on condition.
Click to expand...
I don't have anything against the gentlemen and hopefully didn't imply otherwise. Unlike a few others that peddle their wares on here at times, he appears to be honest about what he's selling. And as far as I am concerned, it's his prerogative to put any price he chooses on his parts. But if I run across something that fits this thread's content, I will continue to post regardless of the seller.
 
Last edited:
You must log in or register to reply here.

Similar threads

S
SC pig for sale
Replies
2
Views
587
samc2447
samc2447
Hobbs81
Wayward Pig resurfaces…
Replies
11
Views
1K
PabloCruise
PabloCruise
jestlurnin
Top 10 uses for a pig
2
Replies
33
Views
3K
jefffj55
jefffj55
sloanstavern
Pig found
Replies
7
Views
1K
LCMoneyPit
L

Users who are viewing this thread

Total: 2 (members: 0, guests: 2)

Share this page

Back
Top Bottom