They are nice. Will be calling you soon for the contact info. Great job buddy
Project LandROC
- Thread starter Mcgyver24
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #342
Day 193
I literary cashed in my piggy bank. I had an old water cooler bottle that I have been saving my left over change in for the past 20 plus years, luckily my bank counts change for free. I ended up with a few hundred pounds of change that I converted to rims and tires.
I went with 17 X 9 Mickey Thompson Classic Lock wheels wrapped in 37 X 12.5 X 17 Nitto Trail Grapplers.
Last edited:
Absolutely sick!!
Wow nice build!
Where can I get one of those 12V/USB receptacles like you have in your console? I need one!!!
Where can I get one of those 12V/USB receptacles like you have in your console? I need one!!!
- Thread starter
- #345
Thanks everybody for all the support!
@Senor Aguas, I got mine either from Ebay or Aliexpress. I think it was $5-6 shipped.
@Senor Aguas, I got mine either from Ebay or Aliexpress. I think it was $5-6 shipped.
- Thread starter
- #346
Day 194
I removed the key ignition system in my tilt column and installed a push button. I then wired the push button to a Toyota Prius control module for ACC, start and stop. Next I installed a wood grain steering wheel from Grant. Then I finished mounting and hooking up the rear heater.
Last edited:
ElHefe
SILVER Star
Wow. That looks great.
Oh man, gunna be calling you for this too....
- Thread starter
- #349
Days 195 - 198
Start the finishing touches on the wiring, loom and fusebox.
Last edited:
- Thread starter
- #350
Days 199 - 200
I finished up almost all the wiring and finally assembled and hung my half doors.
Last edited:
gwalt584
SILVER Star
build
I don't know why you want to put pictures of that junk up for anyone to see, LOL.
Just kidding
I have been a loyal fan and always love to see your work.
This is just AWESOME!!!
Gary
I don't know why you want to put pictures of that junk up for anyone to see, LOL.
Just kidding
I have been a loyal fan and always love to see your work.
This is just AWESOME!!!
Gary
MicahMan
TLCA 20925
This build is amazing! I love the button it looks so Tron!
Been a while since I commented on your build...This is freaking exellent!!!! The truck is beautiful. Makes me want to restore my 78 40 just to this type of exellence, but I don't think I have that kind of talent..or imagination...just freakin' beautiful...
great build, just wondering where did you get the gauges you used in the cluster, I know you had to mod them to fit, just wondering where you got them??
- Thread starter
- #355
Fellow Mudders….Thank you very much for all the support, it keeps me going!!!
@RAYJON, thanks, I picked up the gauges at the following places below. Let me know if you have any other questions.
http://www.summitracing.com/parts/equ-7362
http://www.summitracing.com/parts/atm-2391
@RAYJON, thanks, I picked up the gauges at the following places below. Let me know if you have any other questions.
http://www.summitracing.com/parts/equ-7362
http://www.summitracing.com/parts/atm-2391
cruiserkreutz
SILVER Star
This build is truly the eighth wonder of the world. Your attention to detail is amazing, I thought I had a bad case of OCD, not anymore. I love how you are quick to answer members questions, thanks for the informative posts and raising the perfection bar another notch!
Tokamak
SILVER Star
Great work, very nice build.
Every time I read your post I get pissed, cause the bar keeps moving up.
Keep up the great work, gives us all ideas to add to our builds. I already bought my 3x5x1/4" tube to shamelessly copy your bumper design.
Every time I read your post I get pissed, cause the bar keeps moving up.
Keep up the great work, gives us all ideas to add to our builds. I already bought my 3x5x1/4" tube to shamelessly copy your bumper design.
The horse can smell the barn
Yer getting close to that magic day you start it and go cruising. I have been watching you building this for close to 2 years now I think... been a very nice journey. I am a purest and at first was kind of turned off by your complete overhaul - but your quality of work and infusion of your own personal touch has really inspired me and you have done the FJ-40 well. I thank you sir.
Yer getting close to that magic day you start it and go cruising. I have been watching you building this for close to 2 years now I think... been a very nice journey. I am a purest and at first was kind of turned off by your complete overhaul - but your quality of work and infusion of your own personal touch has really inspired me and you have done the FJ-40 well. I thank you sir.
thanks I was looking for a way to do something like that looks great and summit is here in town...
- Thread starter
- #360
Day 201
Thank you for all the kind words!
I found some cheap floor mats from Costco and thought I would give them a try. After trimming them down they seem to be a great fit, not bad for $13.
Last edited:
