Love it. Good use of space in the bay, and on the cooler side of the 2F.
Pretty quiet in here... what are you working on? (2 Viewers)
- Thread starter Stumpalama
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Love it. Good use of space in the bay, and on the cooler side of the 2F.
I've had a lot going on and my plate has been full of stuff needing my attention, so the land cruiser is having a long sit as i try to knock out a bunch of other projects.
Currently doing a frame swap on the camper hauler 7.3, going to an 06 f350 frame so i'll no longer have leaf spring front and i'll have bigger axles.
Cut a rotting deck and stairs off from my house, its rotting and was posing a danger of ripping the side of our house off. Have to redo seven support beams and a couple other bits. Going to build it a lot smaller than original and try to seal it from the elements unlike the previous owners.
honorable mention to the danger ranger flatbed, putting in work while snappin necks.
I am collecting toyota parts as i find them though, got an 80 series free float for the rear, a 60 front housing, and two 60 front third members with 4.56 gears. One even has an lsd! The housing already has marlin gussets and ruffstuffs soa kit thats turned 10deg for caster, so it ready when ever i get the springs i want! Also found a cyber monday deal where 6 shooter knuckles were over $200 off so i ordered those! I didn't want to turn into one of those members that jumps in an out of being active or just up and vanishes in the wind. I plan on building the bj70, but i got other stuff i have to do first. I'm trying to take it out more, but the radiator has a leak and i need to pull it and fix it soon, also gotta adjust the valves in the 3b.
Currently doing a frame swap on the camper hauler 7.3, going to an 06 f350 frame so i'll no longer have leaf spring front and i'll have bigger axles.
Cut a rotting deck and stairs off from my house, its rotting and was posing a danger of ripping the side of our house off. Have to redo seven support beams and a couple other bits. Going to build it a lot smaller than original and try to seal it from the elements unlike the previous owners.
honorable mention to the danger ranger flatbed, putting in work while snappin necks.
I am collecting toyota parts as i find them though, got an 80 series free float for the rear, a 60 front housing, and two 60 front third members with 4.56 gears. One even has an lsd! The housing already has marlin gussets and ruffstuffs soa kit thats turned 10deg for caster, so it ready when ever i get the springs i want! Also found a cyber monday deal where 6 shooter knuckles were over $200 off so i ordered those! I didn't want to turn into one of those members that jumps in an out of being active or just up and vanishes in the wind. I plan on building the bj70, but i got other stuff i have to do first. I'm trying to take it out more, but the radiator has a leak and i need to pull it and fix it soon, also gotta adjust the valves in the 3b.
CrabCake
SILVER Star
You've been busy for sure! Be careful with that Ford stuff, it's heavy as you know....I have a fake disk in my neck and a permanently numb right thumb and forearm thanks to my son's 99 250 super duty with the 7.3...we were doing the leaf packs up front to level it back out and yanking those axles and springs around herniated the disk in my neck.
And my same son is Jelly about the Land Cruiser fun, especially the big tire old school 40's, but he's always been a Ford fan and just picked up this beast....1 ton SAS, 460 motor, etc....built by an old Ford mechanic from all Ford part and actually quite well done and still rust free!
And how he had to trailer it home on stock size wheels & tires....the white 250 is what did my neck in...
prharper
GOLD Star
Eric Jr is looking proud!You've been busy for sure! Be careful with that Ford stuff, it's heavy as you know....I have a fake disk in my neck and a permanently numb right thumb and forearm thanks to my son's 99 250 super duty with the 7.3...we were doing the leaf packs up front to level it back out and yanking those axles and springs around herniated the disk in my neck.
And my same son is Jelly about the Land Cruiser fun, especially the big tire old school 40's, but he's always been a Ford fan and just picked up this beast....1 ton SAS, 460 motor, etc....built by an old Ford mechanic from all Ford part and actually quite well done and still rust free!
And how he had to trailer it home on stock size wheels & tires....the white 250 is what did my neck in...
That's a tall truck.You've been busy for sure! Be careful with that Ford stuff, it's heavy as you know....I have a fake disk in my neck and a permanently numb right thumb and forearm thanks to my son's 99 250 super duty with the 7.3...we were doing the leaf packs up front to level it back out and yanking those axles and springs around herniated the disk in my neck.
And my same son is Jelly about the Land Cruiser fun, especially the big tire old school 40's, but he's always been a Ford fan and just picked up this beast....1 ton SAS, 460 motor, etc....built by an old Ford mechanic from all Ford part and actually quite well done and still rust free!
And how he had to trailer it home on stock size wheels & tires....the white 250 is what did my neck in...
CrabCake
SILVER Star
Yes it is...does have a 3" body lift that I think he'll pull back off, but the springs are OEM Fords and not really that stiff amazingly enough....riding on 44's now, tires pretty crusty, but hold air. His first truck that he bought when he was 15 (still has but parting out) is a 93 Bronco...had it for 14 years now. Got the 4bbl carb rebuilt and needs new ignition stuff due to a weak spark, but a fun project for him no less...I did tech my boys well on mechanicals!
prharper
GOLD Star
Added another Toyota to the stable for my son - Tacoma. Now he is interested in wheeling….. oh and upgrades 
Added another Toyota to the stable for my son - Tacoma. Now he is interested in wheeling….. oh and upgrades
View attachment 3494574View attachment 3494575
I figured once he got it he would want to do more with it!!
It will be fun to have him join us at some events and see how he takes to the hobby!
iptman
SILVER Star
Added another Toyota to the stable for my son - Tacoma. Now he is interested in wheeling….. oh and upgrades
View attachment 3494574View attachment 3494575
Tell him to stay off Tacoma World. It's a cesspool.
Btw, auto or manual?
Disagree. Sign up and immediately create the following threads:
Which lift do I want?
Largest tire that will fit without cutting bodywork
Suggested oil change interval
Which tire should I get
And the chef's kiss: Which offroad gear will make my truck look special at the mall?
Sit back and watch the hilarity that is sure to follow.
(I troll the turd Gen section pretty hard, since the 1st Gen, Best Gen section isn't super active)
1MOA
SILVER Star
On a good note. UPS is delivering my rebuilt steering box for the 40 next week.
It was sent off to west texas off road and was on it's way back when it was lost somewhere in Tennessee at a facility. ......5 weeks ago. I had basically given up on it and was about to pull the pin on the insurance process when I got a notice that they had located the item and it would be getting to me next week. On a coolER note west texas off road were decent about the entire thing and said they would reach out to their crowd to get a replacement power steering box and would discuss a rebuild and a price on it when/if they sourced one.
Hopefully I will be back on track for some tender TLC on the 40
It was sent off to west texas off road and was on it's way back when it was lost somewhere in Tennessee at a facility. ......5 weeks ago. I had basically given up on it and was about to pull the pin on the insurance process when I got a notice that they had located the item and it would be getting to me next week. On a coolER note west texas off road were decent about the entire thing and said they would reach out to their crowd to get a replacement power steering box and would discuss a rebuild and a price on it when/if they sourced one.
Hopefully I will be back on track for some tender TLC on the 40
prharper
GOLD Star
Sadly it's not a manual, hard to find especially considering the other criteria on the list.
You're not kidding on Tacoma World. That place is out of hand!
well let him get into it slowly... 35s and all are not needed right away!
afgman786
SILVER Star
That's a lie.. don't you discourage over-modding
This thread is just getting fired up
New Oil Cleanliness
I learned something from the attached video. I was not aware new/unused oil had a contamination level that wasn’t ZERO. The best high flow filters...
www.tacomaworld.com
Guy watches YT video about PRE-FILTERING new engine oil and is now considering doing it on a Taco.
Sure, there are stupid threads on every car forum, but what makes TW so special, is how there is no beating-around-the-bush on calling them out as such and then having the shyte show commence immediately thereafter.
I've never owned a VW, but I've seen several references naming VWVortex as a good comp for TW.
Last edited:
No Taco here, but I have been needing some good entertainment so maybe I'll start lurking there every now and then!This thread is just getting fired up
New Oil Cleanliness
I learned something from the attached video. I was not aware new/unused oil had a contamination level that wasn’t ZERO. The best high flow filters...
Guy watches YT video about PRE-FILTERING new engine oil and is now considering doing it on a Taco.
Sure, there are stupid threads on every car forum, but what makes TW so special, is how there is no beating-around-the-bush on calling them out as such and then having the shyte show commence immediately thereafter.
I've never owned a VW, but I've seen several references naming VWVortex as a good comp for TW.
CrabCake
SILVER Star
Collecting parts...105 Steering Sector Shaft upgrade & Delta frame reinforcements. No problems at this point, but I can just see this one coming the harder I decide to wheel it. Might as well be pro-active and found a great deal on the steering kit at $599 w/free shipping on FleaBay. One left out of 10 kits from ASR if anyone is looking!
Genuine Toyota Land Cruiser 80 Lexus LX450 105 Sector Shaft upgrade kit LHD | eBay
Shaft, Cross ( sector ) 44111-60060. Screw, Sector Shaft Adjusting 45357-60030. ( note: on the last picture with the 80 series spline twisting due to steering stress ).
www.ebay.com
iptman
SILVER Star
Dang, that is a good deal. I've been meaning to do this myself. What's the game plan for the gear box rebuild.
CrabCake
SILVER Star
I think I'm going to give it a shot myself...did a 6 speed transmission swap on my Audi RS6, so this can't be that bad, right?
Here's a great thread on it...
forum.ih8mud.com
Here's a great thread on it...
Steering gear box rebuild
This is the second time I’ve seen the inside of an 80 series gearbox. I bought a used box this summer and rebuilt it with the help of a good friend and Lexus mechanic. Then we swapped it onto the truck in place of the original box, which was leaking from the input seal. Unfortunately, I managed...
forum.ih8mud.com
