ace10

I really miss the NLA thread. If I didn't have a new one swapped in already, here's a list for a '97 I'd source: 105 power steering gear box with pitman arm New distributor, the whole thing Cruise control actuator All window motors and...

As much as I like, my 5VZ-powered '95 Taco, I don't really find it any more real world driveable than my '03 taco which has the 2.7l I4. Both are 5 speed, extended cab, 6 lug. I know on paper there should be a significant difference, but I just...

What is your tongue weight on the 3500lb load? If you don't know the answer, then you have your answer. You shouldn't need any special equipment to safely haul that.

25 tops for immaculate example

Spray paint all over it and go wheeling in it I wouldn't trust that rusty pos on the hwy brake lines have got to be about to fail. That rusty I don't see how the body can be called beautiful.

Cheap transportation https://forum.ih8mud.com/threads/mclean-va-1996-toyota-4runner-4wd-sr5-v6.1321114/

Honestly, this seems like a pretty big project to take on. You have body work, AC work (both from the accident and the rear system leak), and whatever maintenance is due. The rear AC leak is common and can be a bear to correct. Honestly this...

That would be a pass for me. There's enough rust to be an annoyance at the very least and the damage is spread out over enough tasks that it would be a big pain, IMO.

Please post the VIN so that somebody else doesn't buy that turd.

Come over to the CLCC sub forum so we can make fun of your Highlander. :)

That number may be from a burner phone. These guys have been screwing people over for years selling crap used cars. His name is Ebrahim Tehrani. He goes by Pete, Bob and quite a few other names. He and some of his friends buy and sell cars. He...

Called my local dealer here in MA and they are taking deposits at $7500 above MSRP. Nope. Anyone find a New England dealer willing to do MSRP, please let me know.

you ok?

3 hour per side shop rate, seem about right. I doubt Toyota has a book rate for this, since they don't sell LBJ. For those contemplating replacing lower ball joints themselves. A few tips: 1) Use ball joint puller! I correct a lot of damage...

'93 = FZJ80

Ask to see what is under those covers!

I made some costly and not-well-thought-out changes during construction. Pissed away about a foot of overhead height. If I could go back in time, I'd be much better off. RE: color, I can't describe it, but 5000K just hurts and kinda makes me a...

Definitely want dimming. And you definitely want to be 100% certain of the color temperature you want. Personally, I cannot stand 5000K, makes my eyes bleed. In the metaphorical sense. I would love to have 3500K, but they're hard to source, so...

Found his obit. https://www.legacy.com/us/obituaries/name/dominic-smith-obituary?id=52465612 Donations in his memory. https://www.supportsmfire.org/

It was a beautiful ceremony. I miss him. A positive is that this has brought me closer to my friends and family. Life is short.

@cruiserbrett, @1973Guppie, @landcrusher909 and I were there as well. It was a great service. He touched a lot of people. Miss him

I was honored to attend Dom’s service today , I retired from a neighboring fire department and also own several cruisers. I drove my 45 to the service knowing Dom would have appreciated it. RIP brother Dominic

RIP Dom. To those of you who stepped up and helped Dom get his 45 driving again you are to be commended!

Well Mud Family, we lost Dom last month. Those of you that were blessed to know him know He was one of the best, if not the best of us. He will be missed. Prayers for his family.

Dom was one of my best friends. I feel honored to be around him in his last days. Life is so short. It seems like yesterday we were hanging out talking s*** to each other and working on cruisers. His gift to all of us is a reminder to spend more...