Dang i actually prefer the V2 light color/output. Any chance of other light options? I'm a bit of a LED snob, really can't stand the blue tint.
ARCHIVE Owl plug-and-play LX courtesy/puddle replacement and rock lights
- Thread starter Ramathorn15
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I’m also curious if the blue tint is the actual color or if it’s just the photo. LEDs light output and color are notoriously difficult to capture in a photo.
aaronrules
Coolest person you know!
Can't wait for these to be available. Will you be able to sell just the brackets? I may have a set of those exact lights...at least mine look a lot like the ones you have in these pictures...mine are still sitting in the box waiting for me to figure out how and where to put them.
Very true, but mass produced generic LEDs are notoriously blue tinted. If they use a standard die i could swap them for some nichias or NW xhp's depending on the circuit voltage.
Its really not that bad compared to the initial photos and my interiors light output
. Just installed today while waiting for the correct brackets.
Man the rocklights plus the LED interior looks SLICKIts really not that bad compared to the initial photos and my interiors light output
View attachment 1960544
Installed my lights yesterday- super easy (plug and play LX470) - great quality
I have V3 lights. Wish the output was brighter like the original.
I have the V3 lights and I think the light output is excellent. Way more light output than the oem running board lights, and more than bright enough to double as rock lights.
I was able to route the wiring behind the AHC globes/accumulators and on top of the frame for a super clean oem look.
I’d be interested in a 8 light set with the additional 4 lights at each corner of the vehicle.
I was able to route the wiring behind the AHC globes/accumulators and on top of the frame for a super clean oem look.
I’d be interested in a 8 light set with the additional 4 lights at each corner of the vehicle.
- Thread starter
- #411
Probably not likely. Some have already complained about the $150 price tag. If the lights alone cost $300+, it wouldn't appeal to most.
@Amplificus
@socalmtbiker
Rare chance to pick up a set of brand new V2!!! Owl Expedition Rock Lights
forum.ih8mud.com
@socalmtbiker
Rare chance to pick up a set of brand new V2!!! Owl Expedition Rock Lights
For Sale - New 100 Series Owl Expedition V2 Rock Lights
For sale is a brand new, never installed, complete set of Owl Expedition Rock / Puddle / Courtesy / Slider / Running Board Lights! These are for the Land Cruiser 100 Series but I believe they fit the LX470 as well. All hardware, wires, harnesses, decals, relay, etc is included! Yes - I paid...
forum.ih8mud.com
PM sent@Amplificus
@socalmtbiker
Rare chance to pick up a set of brand new V2!!! Owl Expedition Rock Lights
For Sale - New 100 Series Owl Expedition V2 Rock Lights
For sale is a brand new, never installed, complete set of Owl Expedition Rock / Puddle / Courtesy / Slider / Running Board Lights! These are for the Land Cruiser 100 Series but I believe they fit the LX470 as well. All hardware, wires, harnesses, decals, relay, etc is included! Yes - I paid...
So if I buy this kit, do the new lights already come with a Toyota style connector? You just plug them in or is there more involved? I removed my stock running boards (2007 LX) so now I just have some open connectors that I wrapped tape around so water doesn't get inside.
@Kabanstva I have same year LX and It should be plug and play on your LX. Kit uses a factory style connector.
@Sargy
Are these the V3 lights?
Are these the V3 lights?
Its really not that bad compared to the initial photos and my interiors light output
View attachment 1960544
@S.CarolinaFZJ80 Not much to see. I removed the skid plates/guard plates covering the AHC system (2x 12mm bolts at each corner) and routed the wires behind the AHC components to the top of the frame rail. There are factory wire looms running on top of the frame rail. You can feel them if you stick you hand up there. I just routed my wiring next to the factory wiring.
