out with the old, in with the, well, old... (4 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

What did you do with it after the pull?
R
 
since i had to take the rope off and wash it, i made a "rope lock" for reinstall.

like this but free.

20231128_113938.jpg


20231128_114004.jpg


20231128_114121.jpg


20231128_114331.jpg


20231128_122726.jpg
 
heavy duty shrink wrap?
it's just heat shrink, ya.
i ended up almost running the line off the drum the other day. 100' of rope really isn't that much.
i needed to add some kind of indicator. this came to me while I was thinking about putting a piece of red tape or heat shrink on the line to show.
i don't think not having this fully sewn will be any sort of issue.
 
it's just heat shrink, ya.
i ended up almost running the line off the drum the other day. 100' of rope really isn't that much.
i needed to add some kind of indicator. this came to me while I was thinking about putting a piece of red tape or heat shrink on the line to show.
i don't think not having this fully sewn will be any sort of issue.
I have a length of rope shroud on my synth line at the drum. If the shroud peeks out the fairlead, then I'm at the end of workable rope. I took my old synth line to a shop and they made me two extensions from the remaining good lengths of rope. I think I have 100' on the drum and two lengths of about 40-50' for extensions.
 
i have a couple shorter, 25, 30ish footers.
been considering a longer. it would be nice to have another 100', especially at only 2lbs.
wouldn't hurt to have a couple moar soft shackles either.
 
I like this guy's stuff.
 
I like this guy's stuff.
eclectic mix of bits on that site.
will likely grab another snatch pulley at that price though.
 
eclectic mix of bits on that site.
will likely grab another snatch pulley at that price though.
Yeah, he's a bit of a tinkerer. That pulley/soft shackle combo is a good deal.
 
grabbed one of these. he's sending me another bag for my f55 wheel. very cool. quick response to my email.

 
link to the recovery thing.

 
after doing a rock light install for a guy, and then some good deals on black friday. i bought a set id been wanting for a bit.
i thought having magnet mounts was going to save some time, it didn't.
lights are the rgb

i wanted colors but not to get raped for the controller. I was able to get all but one color using two on-off-on switches. one is dpdt, one is standard.

20231203_170253.jpg


20231203_170223.jpg


20231203_170120.jpg
 
moar.
i damaged one of the lights testing from a Milwaukee 18v. guys were awesome about getting me another one. thus the non changing hood scoop light.

20231203_170021.jpg


20231203_170149.jpg


20231203_170048_001.jpg
 
bits showed up.
compared to the F55 pulley.
shackle made by Yankum for Brennan's
yellow block actually does what the F55 red fingers are supposed to do.
nice stuff. solid addition to the bag.

20231207_170927.jpg


20231207_170703.jpg


20231207_170718.jpg
 
Last edited:
added a cat.
hopefully this will end the gassing smells and maybe quiet the exhaust a touch.
also potential fire suppression.
had to swap the sensor for a longer pigtail.

20231221_174955.jpg


20231221_175003.jpg


20231221_175013.jpg


20231221_175036.jpg
 

Users who are viewing this thread

Back
Top Bottom