Ok Fellow 40's Mudders - I need your Help to make it happen .....

[YoYoHo]

I’ll dig through parts this weekend and see what I can send that’s on the list.Without reading the whole thread are we mailing stuff to @whitey45 ? Or should we wait and just post what parts we can send till that gets figured out?

Most people are shipping parts to me and I will pack them in the 40 and once we are ready and have all the transport and time lines sorted I will get the tow happening and get it up to @kevos37 through the fellow Mud Shippers we are using . We are not 100% sure when Kev will get his new shop but we have a member up near him who can store so shipping there is another option.

I have a duel diaphragm brake booster and master so far. I will keep digging around when I have more time Oh and wiper cover

Thanks.

Thumbs up to all those guys sending me tracking numbers on the parts we have coming in. At the current rate we should be good to start moving stuff in the next month or so .

 

[landcrusher909]

I'm here in So Calif. What's the shipping address or drop off location ?

 

[JJWA40]

Here is the Shopping List - Please let me know what I have missed :

1977 FJ 40 Chassis - Clear CA Title - @YoYoHo
Rear Diff Complete - @YoYoHo
Front Disc Brake Diff Complete - @Ouiser
4 Speed Transmission and Split T-Case - @YoYoHo
Front Drive Shaft - @YoYoHo
Rear Dive Shaft - @YoYoHo
Steering Box - @YoYoHo
Windscreen Surround - @YoYoHo
New 2pc Reproduction Set of Fully Engraved DATA ID Plates with Rivets - @RAGINGMATT
Choke Cable - @RAGINGMATT
Glove Box Door (customized with Landcruiser chrome emblem) - @Downey
Spedo bezel - @Downey
Right rear quarter panel TOYOTA emblem - @Downey
Tail Light Assembly Covers - @4Cruisers
2F Engine Complete or Parts of
Factory Front Bucket Seats - PR - @65swb45
Factory Seat Mounts - @fjl40
Hard Top
Windscreen Glass
Gauges
Fuel Tank - @whitey45
Fuel Tank Cover - @whitey45
Fuel Tank Filler and Cap with hose and clamps - @whitey45
Front Doors
Rear Doors
Hard Top
Front Fenders
Lights
Front Turn Signals - @emac
Bezel
Badges
Turn Signal Switch
Front Bumper
Rear Bumperets - @whitey45
Wiper Motors and Arms
Tunnel Cover
Bonnet
Wheel and Tires ( Guessing stock with Hubcaps )
Steering Wheel
Heater and Blower
Dash Pads @FJ40 MATT
Roll Bar and Pads
Wiring Loom - @FJ40 MATT
Windscreen Hold Up Knobs
Glove Box Lid - @Downey
Radiator - @whitey45
Radiator Fan shroud - @whitey45
Radiator Far - @whitey45
Coolant overflow bottle
Windshield washer bottle
Wiper motor cover
Distributor
Jump seats(maybe he’ll want a forward facing rear)
Intake/exhaust manifolds
Fuel door
Running boards?
New shut off valve for the heater
Brake booster?
Brake master
Clutch master and slave
Sun Visors - @emac
Side view mirrors
Rear View Mirror
Internal Light
Tire carrier
Hinges, front doors, windshield and hood (none for ambulance doors)
Washer bottle bracket
Radiator mounting frame
Door stops
Wiper cover
Running boards
-oll bar, I have a new unassembled Metal Tech roll bar from my 67 project, I think it should work. It had some heat to it. The main hoop tweaked just a little, but I think I could fix that.
Gas line/emissions cover. Upper and lower.
Battery tray and mounting bracket @kevos37

Any need for a starter? I have a reman that has never been out of the box.

 

[YoYoHo]

No I don't have an inspection report. I got it from classic cruisers they said they looked in the transfer case and transmission. I know it looks crusty. You are welcome to call them directly, ask for Brandon. Let him know it is the transfer case that he traded to Dennis.
My request of his inspection was to make sure the gears looked good and it was in working order. It is out of a Canadian mine truck I expect a rebuild would be prudent.

Any need for a starter? I have a reman that has never been out of the box.

Yes please we do not have one currently.

Thanks,

 

[JJWA40]

Cool. Can you send me a shipping address?

 

[Honger]

I'm in for the clutch master and slave... will pay from here to have new units sent. Great idea!

 

[YoYoHo]

Cool. Can you send me a shipping address?

Done you have mail

I'm in for the clutch master and slave... will pay from here to have new units sent. Great idea!

Thanks, you have mail with address in it

 

[landcrusher909]

Any chance we can get an updated list of parts

 

[YoYoHo]

@RodrigzCrzr acdn you please reach out to @landcrusher909 he is up in your area and has some parts to donate so it makes more sense for him to hook up with you for drop off .

 

[YoYoHo]

Any chance we can get an updated list of parts

Yep I will get an updated list tonight

 

[fjgoober]

I don't get on mud as much as I would like to but I just ran across this thread. Really like the pay it forward and very impressed with the donations.

Yep I will get an updated list tonight

@YoYoHo updated list as well as the shipping address by @kevos37 mentioned in post 81.

@fj40Matt on Post 43 said he had dash pads, have you shipped those yet? If so, upper & lowers?

We can donate and just ship out to the location by @kevos37.

 

[thecrazygreek]

I have one of these to spare with the rubber gasket. Bought it for my 78 resto, but decided the original was nice enough...
Is this something that is needed still?

If so, send me an address...

 

[FJBen]

I know it's not the right year for cruiser, but I do have a really nice shape older button I'd donate if they find an older style steering wheel?
I also have one of the above placards, but that one is WAY nicer than mine lol.


not, mine but it's this style.

 

[Downey]

I have one of these to spare with the rubber gasket. Bought it for my 78 resto, but decided the original was nice enough...
Is this something that is needed still?

If so, send me an address...

View attachment 1892184

You should go ahead and donate yours, and I'll keep mine because mine has a scratch, and does not have a gasket- - -easy deal, thanks.

 

[kevos37]

I don't get on mud as much as I would like to but I just ran across this thread. Really like the pay it forward and very impressed with the donations.



@YoYoHo updated list as well as the shipping address by @kevos37 mentioned in post 81.

@fj40Matt on Post 43 said he had dash pads, have you shipped those yet? If so, upper & lowers?

We can donate and just ship out to the location by @kevos37.

I just wanted to say that I ordered a set of your roll bar pads prior to the fire. I thought they looked fantastic ! The look and feel were like the oem but a lot more durable.

 

[fjgoober]

I just wanted to say that I ordered a set of your roll bar pads prior to the fire. I thought they looked fantastic ! The look and feel were like the oem but a lot more durable.

@kevos37 Thanks for the compliment. I am planning on sending a roll bar set as I didn't see where anyone had donated that. If @fj40Matt hasn't already sent upper and lower dash pads or isn't planning on it (I don't want to take away from his gift/donation), we can send some of those as well. The lowers in @YoYoHo rig looked like they needed an upgrade.

 

[JJWA40]

@YoYoHo just shipped the starter. Thanks for putting this all together. Really enjoying being a part of the mud family.

 

[Krondor]

What sorts of switches are still needed? I have a number from a ‘72 that I will donate if needed.

 

[Rusty 72]

I have the steering column parts, steering wheel and some FI conversion stuff. With my work schedule it will take 2-3 weeks before I can ship. Probably easiest for me to ship directly to Kevin.

 

[thecrazygreek]

I still need an address? Did I miss it?

I also have a steering wheel that may be available. (78 vintage) I'll take a look at it. I know its wrapped, and a bit dusty, maybe some over-spray for being in my shop for so long.. .