Ok Fellow 40's Mudders - I need your Help to make it happen .....

[kevos37]

I will see what @kevos37 chimes in with



Awesome I will update the parts listing



Since we currently have no roof I would think it is a good start

Guys,
I do think split hoods are cool, I have a spear.

I was checking out the list. I had managed to salvage some parts from the fire. I thought I would add them to prevent redundancy.

-Tire carrier
-Hinges, front doors, windshield and hood (none for ambulance doors)
-Washer bottle bracket
-Radiator mounting frame
-Door stops
-Wiper cover
-Running boards
-Roll bar, I have a new unassembled Metal Tech roll bar from my 67 project, I think it should work. It had some heat to it. The main hoop tweaked just a little, but I think I could fix that.
-Gas line/emissions cover. Upper and lower.
-Battery tray and mounting bracket



That's all I can think of for now.

Cheers,
Kevo

 

[4Cruisers]

From my earlier post I can also provide a used OEM front bumper (it needs to be blasted and painted/powder coated) and a bezel. It might be easier for me to ship them to Valley Center, I'll check into it.

 

[landcrusher909]

I'll start digging through my stash this weekend. Pretty sure I have the booster and master. Should have the clutch stuff also.

 

[Snicklephritz87]

I am in the Bay Area. I have bestop lower doors and few other odds and ends.

 

[ToyotaMatt]

Guys,
I do think split hoods are cool, I have a spear.

I was checking out the list. I had managed to salvage some parts from the fire. I thought I would add them to prevent redundancy.

-Tire carrier
-Hinges, front doors, windshield and hood (none for ambulance doors)
-Washer bottle bracket
-Radiator mounting frame
-Door stops
-Wiper cover
-Running boards
-Roll bar, I have a new unassembled Metal Tech roll bar from my 67 project, I think it should work. It had some heat to it. The main hoop tweaked just a little, but I think I could fix that.
-Gas line/emissions cover. Upper and lower.
-Battery tray and mounting bracket



That's all I can think of for now.

Cheers,
Kevo

@YoYoHo

Hey Kevo ,

Please confirm your Washer Bottle Bracket Type ?

if u have the 45 degree Angle Inner Fender Mount style / type , then this WILL work

its a OEM Toyota Part in a Private Label NipponDenso parts box , take note of the supplied surface mount bracket

wedge type design

it also comes with a roll of OEM Green Tint washer hose



Kindly Matt

 

[ToyotaMatt]

 

[kevos37]

That bracket looks like the one that I have. Thanks!

 

[ToyotaMatt]

That bracket looks like the one that I have. Thanks!

Ok great !

Well then u have a new bracket then too ,

@YoYoHo can u please cross this one off the list and put my name next to it , I have Kevo
On the washer bottle needed parts kit

It will ship with his new data plates

 

[YoYoHo]

I'll start digging through my stash this weekend. Pretty sure I have the booster and master. Should have the clutch stuff also.

Coolio let me know

I am in the Bay Area. I have bestop lower doors and few other odds and ends.

Ok thanks let me know, I am guessing it will be easier for you to deliver direct

 

[65CRUISER]

Heater shipped out today and i also tossed in a 2F exhaust manifold for the cause. I'll pm the tracking numbers.

 

[YoYoHo]

Heater shipped out today and i also tossed in a 2F exhaust manifold for the cause. I'll pm the tracking numbers.

Awesome your assistance is greatly appreciated

 

[Snicklephritz87]

@YoYoHo yeah i can do the Bay Area delivery leg. I am sure PMC event would be a good time to deliver it.

 

[YoYoHo]

@YoYoHo yeah i can do the Bay Area delivery leg. I am sure PMC event would be a good time to deliver it.

Ok cool so you can do the Bakersfield to Bay , what dates are PMC ?

 

[4Cruisers]

@kevos37 are these in good enough shape for you to use? The bumper is straight but has four holes drilled to mount tow bar brackets. There are also several holes drilled in the bezel, probably for some aftermarket lights or something.

 

[kevos37]

@kevos37 are these in good enough shape for you to use? The bumper is straight but has four holes drilled to mount tow bar brackets. There are also several holes drilled in the bezel, probably for some aftermarket lights or something.

View attachment 1888401

View attachment 1888402

View attachment 1888403

View attachment 1888405

They look mighty fine!. Thank you!

Kevo

 

[4Cruisers]

They look mighty fine!. Thank you!

Kevo

I'll package them up, along with the taillight covers, and send them to @YoYoHo, if that's OK.

 

[kevos37]

I'll package them up, along with the taillight covers, and send them to @YoYoHo, if that's OK.

That sounds like a good plan.

 

[4Cruisers]

I'll package them up, along with the taillight covers, and send them to @YoYoHo, if that's OK.

The box will go out Monday and should arrive Wednesday. I found the perfect box. I got it along with the second most expensive Toyota part I've ever bought, the $504 FJ62 dash for my '86 FJ60. The most expensive part was the H55f that Cdan sold me before he retired from American Toyota.

 

[Redgrrr]

I’ll dig through parts this weekend and see what I can send that’s on the list.Without reading the whole thread are we mailing stuff to @whitey45 ? Or should we wait and just post what parts we can send till that gets figured out?

 

[landcrusher909]

I have a duel diaphragm brake booster and master so far. I will keep digging around when I have more time Oh and wiper cover