Official ONSC member buying/selling thread (20 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

ISO - One (or two if available) 15" steelie for the FJ40. It doesn't have to be pretty. I'm willing to clean it up and paint it.

ISO - One (or two if available) BFG KOs 31 x 10.50 R15.

Thanks!
 
Last edited:
Wilderness Systems Tarpon 140 kayak with half back PFD and carbon paddle. Kayak is in good shape, just don't use it anymore - $550 mud price
View attachment 3659699View attachment 3659700View attachment 3659701

Noco GenPro10X1 - used to maintain a battery I had for a year or so. Waterproof and good for 12V lead acid, AGM, lithium LiFePO4, and deep cycle battery maintenance, desulfator. Amazon Link - $75
View attachment 3659702

Shoot me an offer if you’re interested in either!
 
$150. 2 ton Engine hoist , $75 Engine stand (1 ton), $50 Transmission jack , $400 Roof top tent -Mombassa, from the group purchase 5 years ago. All items in used once condition! RTT is the large version, three person (a nice roomy tent). I have an 8 foot garage, so can lower right onto your rig if you can squeeze in. All necessary hardware with the engine hoist and stand included-load balancer hardware for the engine hoist.

View attachment 3658378

View attachment 3658379

View attachment 3658380

View attachment 3658381
That's a hell of a deal on a mombasa rtt. what model is it?
 
GM. Any one looking for Dometic CFX 55. I used this about 10 times and it just sits. It comes with the cover. I have it listed on FBMP for $800. The ONSC price is $650. The fridge is located in Oriental, NC.

 
Random stuff, make an offer for pickup in Charlotte area:

2F Rear Main Seal - PO gave me this from his Cruiser Corps order, is not OEM and I decided to order the Toyota part

Set of stock shock bushings for FJ60

Clutch Slave, hose, and line seal for 85-87 FJ60

IMG_5144.jpeg
IMG_5142.jpeg

IMG_5143.jpeg
 
ISO/Need:
Alternator for 97 LX450. My alternator has stopped charging. I’d like to source one and then rebuild my old one. Let me know if you have an alternator or brushes and voltage regulator for an 80a unit.
 
FREE - All items in this post.
Garage clean out.
Help me help you

- picked by @open country
Late model 60 series cat back, stock exhaust. Mostly solid but needs repair at front of muffler weld and small hole near the exhaust end
IMG_0225.jpeg


- pending pickup @SFROMAN
Stock 60 series rear bumper. Bent forward on driver side.Chrome is in great shape.
IMG_9301.jpeg


- pending pickup @SFROMAN
62 series grey center console minus lid. Cracked in the cupholder area around screw hole.
(Not Pictured)

- Late model 60 series rear seat back. (Brown) Entire vertical seat back, with cushion and excellent condition cover.

IMG_9302.jpeg


- pending pickup @SFROMAN
60 series leaf springs; all 4, front and rear
IMG_8552.jpeg


IMG_8551.jpeg


- 40 series stock leak springs from a 1979. All 4; front and rear.
(Not Pictured)
 
Last edited:
ISO 1 piece FJ40 4 speed T-case (just the case, internals not needed)
 
Last edited:
@ceby You can have this is if it will work for you.

IMG_5885.JPG
 
@Phares I went to ace true value and rented a 4 ton hoist to pull the engine, transmission, and transfer case all at once. I would do that again if I had to pull another
 
Only way to do it IMHO. Two ton will cover it as well.
 
ISO Engine Hoist & Stand that'll support the motor and transmission out of an 80 series. Looking in the Charlotte area. Happy to borrow, rent or buy from you.
I have both you can use. No rush to get them back unless you need the space back.
 
Looking to buy a set of LX450 or any 80 series OEM wheels. It would also be great if they included tires that fit stock ride height in a stock LX450 with aging springs (that is, 33s or 285/75R16 or lower), but not absolutely necessary.
Have a set of LX rims no tires .
 

Users who are viewing this thread

Back
Top Bottom