Official ONSC member buying/selling thread

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

4LowandSlow said:
Sliders for a 84-89 4Runner and mini trucks, possibly other vehicles i can grab some measurements of the length if needed., 2x3 .120 boxed tube with 1.75 .120 tube. Dirty and a little rust and needs the slider mounts and tube cleaned off from my old exo cage. $150
Click to expand...
Garrett, if you could get the length for these, I might be interested in seeing if I can get them to fit my 90. Thanks.
 
Garret,

Put me down for these.
I can coordinate with your dad for pickup sometime next week.
Thanks.



1st Gen mini/4runner front axle shafts. (L&R) $50

1st Gen solid axle spindles ( pair) $20
 
little_joe said:
Garrett, if you could get the length for these, I might be interested in seeing if I can get them to fit my 90. Thanks.
Click to expand...
i'll have measurement for you in the morning
SFROMAN said:
Garret,

Put me down for these.
I can coordinate with your dad for pickup sometime next week.
Thanks.



1st Gen mini/4runner front axle shafts. (L&R) $50

1st Gen solid axle spindles ( pair) $20
Click to expand...
sounds good, if next week doesn't work out ill be back in NC the tail end of the weekend or can bring to gsmtr
 
little_joe said:
Garrett, if you could get the length for these, I might be interested in seeing if I can get them to fit my 90. Thanks.
Click to expand...
sliders are about 60"
 
Hey guys. Doing some spring cleaning and found some good parts that I thought folks may be interested in. I wanted to offer them to you all before offering to the general population. Make a reasonable offer!

AHC Switch for 100 Series: Converted my 100 to a traditional 3" lift a few years ago, so removed this. Worked fine when removed. Still in great shape.
AHC 1.jpg
AHC 2.jpg


Wit's End 60/62 Mirror Mount: SOLD
 
Last edited:
Some more parts of of 3rd gen pickup and 4th gen pickup/1st gen 4runner. Again, make offer.

5 SPD Shift Knob: Came from Yota Shop for 4th gen pickup/1st gen 4runner.
IMG_2477.webp


Visors for 4th gen pickup/1st gen 4runner. Never installed. Bought from Hendrick Toyota in Apex.
88 Visors.webp
88 Visors 2.webp


3rd Gen Pickup Headliner Trim Drivers Side: Well used, but not falling apart.
IMG_2478.webp


AC Switch for 4th gen pickup/1st gen 4runner: Never installed.
AC Switch.webp
 
I have finally decided to sell my 94. It has been a difficult decision, but it is the right one. Here is the link to the FB Marketplace listing. I will do better on the price if it goes to a ONSC member. I also have an extra (although high milage) transmission and a bunch of other parts that I can scrape together.

Here is the link: Log into Facebook - https://www.facebook.com/marketplace/item/1139303450602238
 
4LowandSlow said:
FZJ80 Depo headlights with parking lights, $100

95-97 Gray dash assembly with passenger side airbag $80

95-97 fzj80 center instrument cluster panel, $40
Click to expand...
I'll most likely take the depo headlights (are they scratched or have any broken tabs or anything?) and maybe the cluster (does the trip meter work?) and maybe the dash even though I don't have space for it!
 
thecapedcapper said:
I'll most likely take the depo headlights (are they scratched or have any broken tabs or anything?) and maybe the cluster (does the trip meter work?) and maybe the dash even though I don't have space for it!
Click to expand...
ill have to look, i think theres just minor scratching but no cracks, cluster works just switched them out for the one that reflected the motor we put in.
 
Selling my RTT in case anyone is interested

forum.ih8mud.com

For Sale - SC: OVS Bushveld II

Selling my OVS Bushveld II. I bought this about a year ago and have used it a handful of times. I have been pretty satisfied with the tent so far but it's not quit big enough for my family of four. Asking $1700 OBO located in Hartsville, SC Link to the tent here
forum.ih8mud.com forum.ih8mud.com
 
Beams37 said:
Hey guys. Doing some spring cleaning and found some good parts that I thought folks may be interested in. I wanted to offer them to you all before offering to the general population. Make a reasonable offer!

AHC Switch for 100 Series: Converted my 100 to a traditional 3" lift a few years ago, so removed this. Worked fine when removed. Still in great shape.
View attachment 3645382View attachment 3645385

Wit's End 60/62 Mirror Mount: I bought this and never installed. I paid $130 a few years ago. Not sure what they go for these days, since Joey seems to be out of pocket and the website is down. Never installed.

View attachment 3645390View attachment 3645391
Click to expand...
I'll take the mirror arm mount. PM sent
 
Beams37 said:
Hey guys. Doing some spring cleaning and found some good parts that I thought folks may be interested in. I wanted to offer them to you all before offering to the general population. Make a reasonable offer!

AHC Switch for 100 Series: Converted my 100 to a traditional 3" lift a few years ago, so removed this. Worked fine when removed. Still in great shape.
View attachment 3645382View attachment 3645385

Wit's End 60/62 Mirror Mount: I bought this and never installed. I paid $130 a few years ago. Not sure what they go for these days, since Joey seems to be out of pocket and the website is down. Never installed.
Click to expand...

Beams37 said:
Hey guys. Doing some spring cleaning and found some good parts that I thought folks may be interested in. I wanted to offer them to you all before offering to the general population. Make a reasonable offer!

AHC Switch for 100 Series: Converted my 100 to a traditional 3" lift a few years ago, so removed this. Worked fine when removed. Still in great shape.
View attachment 3645382View attachment 3645385

Wit's End 60/62 Mirror Mount: I bought this and never installed. I paid $130 a few years ago. Not sure what they go for these days, since Joey seems to be out of pocket and the website is down. Never installed.

View attachment 3645390View attachment 3645391
Click to expand...

Wit's End 60 Mirror Arm SOLD
 
Beams37 said:
Hey guys. Doing some spring cleaning and found some good parts that I thought folks may be interested in. I wanted to offer them to you all before offering to the general population. Make a reasonable offer!

AHC Switch for 100 Series: Converted my 100 to a traditional 3" lift a few years ago, so removed this. Worked fine when removed. Still in great shape.
View attachment 3645382View attachment 3645385

Wit's End 60/62 Mirror Mount: SOLD
Click to expand...
I believe this is also the relay for the AHC system ...

AHC Relay.webp
AHC Relay 2.webp
 
You must log in or register to reply here.

Share this page

Back
Top Bottom