Official ONSC member buying/selling thread (16 Viewers)
- Thread starter southerncruiser62
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Texting you some info.
forrest5000
SILVER Star
Hi All, I'm selling a new Kaon fold down table for rear door of a GX460. Check out info here:
forum.ih8mud.com
$300
I know many on here can fab a similar product at a fraction of the cost, but this is a well made, simple to install solution for the less technically inclined
I am only selling it as it doesn't fit my truck with rear drawers installed.
Thx
SOLD - NC: Kaon rear door table for GX460
Brand new, installed but never used as it did not end up being compatible with the drawers I installed in my rig. Fits a GX460, details can be found here: https://www.kaon.com.au/rear-door-drop-down-table-to-suit-toyota-prado-150 From Kaon, these are approx $340 USD inc. shipping to east...
forum.ih8mud.com
$300
I know many on here can fab a similar product at a fraction of the cost, but this is a well made, simple to install solution for the less technically inclined
I am only selling it as it doesn't fit my truck with rear drawers installed.
Thx
Came across this photoman alternator bracket in the classifieds $150:
forum.ih8mud.com
SOLD - Photoman Alternator bracket w/harness and small pulley
I ordered this alternator bracket for my 80 in March of last year and never got around to installing it. I ordered the bracket, harness, and smaller pulley so everything needed to do the job correctly. I can open the bubble wrap if someone needs me to get more pics. $150 shipped. Located...
forum.ih8mud.com
You all might recognize this one...
@msontag03
bringatrailer.com
@msontag03
Supercharged 1997 Toyota Land Cruiser FZJ80 40th Anniversary Edition
Bid for the chance to own a Supercharged 1997 Toyota Land Cruiser FZJ80 40th Anniversary Edition at auction with Bring a Trailer, the home of the best vintage and classic cars online. Lot #57,655.
Any specific year/ range? I passed by an early 2000s that was for sale in a yard on 68 just north of Oak Ridge.
She has a 2000, so something around that vintage. I'll most likely be purchasing something for her, and hopefully getting paid back before the end of the millennium. LOLOL
I've found one I may go look at this weekend. I may swing down hwy 68 and look to see if I see the one you're talking about
forrest5000
SILVER Star
I sure doYou all might recognize this one...
@msontag03
Supercharged 1997 Toyota Land Cruiser FZJ80 40th Anniversary Edition
Bid for the chance to own a Supercharged 1997 Toyota Land Cruiser FZJ80 40th Anniversary Edition at auction with Bring a Trailer, the home of the best vintage and classic cars online. Lot #57,655.
WTB - Used KO2 in size 285/75 R 16 - tread depth about ______
My daughter some how wore out one of 4 tires.
My daughter some how wore out one of 4 tires.
alk747triodad
SILVER Star
Interesting Facebook marketplace ad
www.facebook.com
Log into Facebook
Log into Facebook to start sharing and connecting with your friends, family, and people you know.
www.facebook.com
I need a new air conditioning low pressure hose for an 80. To avoid having someone build me a custom one, is there a slightly longer version that will fit?
jfz80
Cruisin’
Wanted:
Oak color ; Driver side second row interior door handle/armrest combo
Oak color ; Driver side second row interior door handle/armrest combo
For your consideration...
Post many moons ago requesting beer brewing "stuff", here is my "stuff"
Brew sculpture (as the brewers call it, not an invented term of my own) made of 1 3/4" DOM tubing (it's what I had with no specific project name on it at the time) with 2 "hurricane" burners to a single manifold, pump functions but needs rebuild/replacement. I hooked a fresh tank a propane to it, burners work well, needs a coat of paint (if you care), ugly but functional.
All stainless steel fittings, quick connect "cam-lock" stainless fittings with silicone hoses, 3 kegs set up for many configurations or brew techniques, one with stainless "worm" to maintain temp for those needing tight temp controls as well as used to cool the wort quickly.
I have 2 extra kegs (one has had the top cut off, other intact, considered using for distilled spirits with a column distiller) five 5 gal kegs (pop-lock) for finished product, 2 glass carboys (15g and 16.5g) with temp strips for fermentation, hydrometer, other misc items...
Turn key home brewery, need minor items that would need freshened/upgraded regardless, just some grain, yeast, water and time...
$500
Post many moons ago requesting beer brewing "stuff", here is my "stuff"
Brew sculpture (as the brewers call it, not an invented term of my own) made of 1 3/4" DOM tubing (it's what I had with no specific project name on it at the time) with 2 "hurricane" burners to a single manifold, pump functions but needs rebuild/replacement. I hooked a fresh tank a propane to it, burners work well, needs a coat of paint (if you care), ugly but functional.
All stainless steel fittings, quick connect "cam-lock" stainless fittings with silicone hoses, 3 kegs set up for many configurations or brew techniques, one with stainless "worm" to maintain temp for those needing tight temp controls as well as used to cool the wort quickly.
I have 2 extra kegs (one has had the top cut off, other intact, considered using for distilled spirits with a column distiller) five 5 gal kegs (pop-lock) for finished product, 2 glass carboys (15g and 16.5g) with temp strips for fermentation, hydrometer, other misc items...
Turn key home brewery, need minor items that would need freshened/upgraded regardless, just some grain, yeast, water and time...
$500
Other items, inside other kegs for above brewery...
Well.....it's time. Spread the word.
For Sale - Charlotte, NC: 1985 FJ60 V8 Conversion - https://forum.ih8mud.com/threads/charlotte-nc-1985-fj60-v8-conversion.1267143/#post-14115939
For Sale - Charlotte, NC: 1985 FJ60 V8 Conversion - https://forum.ih8mud.com/threads/charlotte-nc-1985-fj60-v8-conversion.1267143/#post-14115939
Does anyone have a stock fj60/fj62 rear spring pack they're willing to get rid of? I need to replace a couple of leaves in one of my packs:
Also, I won a 55" CVT Hybrid Annex at Fall Crawl. Looks like this model sells for $300. Will sell for $150 to any ONSC Member in good standing:
cascadiatents.com
Hybrid Series Awning
The CVT Awning is the perfect sidekick for your vehicle. With the option of additional walls and floors, our awnings have you covered at all angles. Available in both the Pioneer and Hybrid Edition, with many sizes and colors, there's an awning to suit your needs.
cascadiatents.com
Pending sale. It's going to be tough letting her go Thursday.
Saw this posted in Craigslist and also on Mud, local (NC) 80, triple locked. Looks like it could use some love but looks pretty solid, and at a decent price (compared to recent market craziness). No undercarriage pics.
1993 Toyota Land Cruiser, lockers - cars & trucks - by owner -...
1993 (build date 7/93) Land Cruiser in great running condition. I'm not going to list "everything" as far as upgrades, maintenance, new parts etc... because I've had this thing since 1998 so what's...
boone.craigslist.org
