Official ONSC member buying/selling thread (14 Viewers)

[rabid]

Let me know when you want to grab it.
I saved the rear drums off it but pitched the backing plates for some reason. But you can have those too if they are helpful.

 

[roadstr6]

Let me know when you want to grab it.
I saved the rear drums off it but pitched the backing plates for some reason. But you can have those too if they are helpful.

I can get it sooner or later, depending on how bad you need it out of your way. Sent you a PM.

 

[S.CarolinaFZJ80]

Never mind. Dealership still has them available. Just ordered.

Does anyone have a solid late model, large FJ40 battery tray/tie down bar to sell?
Approx. 12.5" x 7"

Battery Tray, FJ40/45, (12.5" x 7") Fits 1/'79 -'84 - TOYOTA

Battery Tray, FJ40/45, (12.5" x 7") Fits 1/'79 -'84 - TOYOTA - TOYOTA Part Fits FJ40/45 ~ 1/'79 to 1984 Tray measures 12.5" x 7" Pictured Left Note: Battery Hold Down Kit cross strap will fit this Tray's threaded riser post if the cross straps tapered bushings are cut shorter to allow for the...

www.coolcruisers.com

 

[Jeff Elliott]

SOLD!

Bought sliders from the guys out at 4x4 Labs. Didn't realize they were incompatible with my MAF drop brackets and will now have to do some intricate fab work to adapt. Rather than do so, I'm thinking of ordering from White Knuckle who has a drop bracket compatible setup. Located in Denver, NC (28037). My loss is your gain - $500


Only tacked the main tube - other than that still virgin...

 

[joecrow]

Feeler...

Bought sliders from the guys out at 4x4 Labs. Didn't realize they were incompatible with my MAF drop brackets and will now have to do some intricate fab work to adapt. Rather than do so, I'm thinking of ordering from White Knuckle who has a drop bracket compatible setup. Located in Denver, NC (28037). My loss is your gain - $500


Only tacked the main tube - other than that still virgin...

I'm interested, is this for the inline cats? Also I assume these will bolt onto the frame rails?

 

[Rice]

WANT TO BUY: Mountain Bike

Looking for an adult small frame (15") Mtn. bike for our 11 year old. He rode my wife's 29'er and feels like (thinks) he would prefer 26". Hardtail would be fine. Would like disks with medium grade components but if you have something else that you believe is ready for another home please let me know.

Much thanks,
Rice

 

[Jeff Elliott]

I'm interested, is this for the inline cats? Also I assume these will bolt onto the frame rails?

Yup, for inlines (I have a '97). Also yes to bolting around the rails (assuming you don't have drop brackets like me) - see u-bolts in second pic

Here's a link to what I bought: 80 Series Landcruiser Sliders

Tack on another $150 to get them to NC BTW

 

[Pick]

WANT TO BUY: Mountain Bike

Looking for an adult small frame (15") Mtn. bike for our 11 year old. He rode my wife's 29'er and feels like (thinks) he would prefer 26". Hardtail would be fine. Would like disks with medium grade components but if you have something else that you believe is ready for another home please let me know.

Much thanks,
Rice

Friend of mine is selling this; may be more than you're looking for??

Titus Racer-X 26" Titanium Full Suspension Mountain Bike 17" / Small...

Titus Racer-X 26" Titanium Full Suspension Mountain Bike 17" / Small Perfect for 12 - 15 year old...

raleigh.craigslist.org

 

[roadstr6]

I can get it sooner or later, depending on how bad you need it out of your way. Sent you a PM.

@rabid Please check your inbox. I sent you a PM with my phone number. I'd like to coordinate pick-up of the axle with you whenever it is convenient. Thanks!

 

[Roxx]

Need 3 npples for the 2f emissions rail. This nipples go on the head and attach to the rail. Anyone has a 2f or parts of one?

 

[cwags12]

@Roxx (Rafael) I have a mostly complete 2F emissions setup stashed away. I most likely have it, but can you send a pic of what you're looking for ? Feel free to PM me pics.

 

[Roxx]

@Roxx (Rafael) I have a mostly complete 2F emissions setup stashed away. I most likely have it, but can you send a pic of what you're looking for ? Feel free to PM me pics.

 

[cwags12]

View attachment 2280897

Darn it. Just checked. Sorry no dice.

 

[mountainibis]

I might have some of those rolling around in a parts box. I’ll check this evening and let you know.

 

[Pirate4run]

Hello all, I have a set of sides for a pre-72 FJ40 that I am looking to get rid of. I have removed all the glass. Sides are pretty rust but I'd rather see them put to use then thrown in the scrap metal pile.

Also I am looking for a heat shield to protect my mini truck PS box from the SBC350 exhaust tubes. Let me know if any of you all may have one. Lastly found out today that my t-case has a crack in it. It is a 4 Speed case so if anyone has a housing or complete T-case I may be interested if I can't get mine tig welded.

Thanks!

 

[Comet]

@Roxx shoot me an address. Buster Brown lives on.

 

[lt1fire]

In search of a cheap but reliable pyrometer for the bronco. If anyone has a used one or can direct me to a good brand of one that isn't made of gold it would be appreciated. The one I put on the suburban came with the truck and I can't even remember the brand of it.

 

[GLTHFJ60]

Amazon product ASIN B0009RUXR4
Comes with all you need. Have had mine for years, no issues.

 

[lt1fire]

Amazon product ASIN B0009RUXR4
Comes with all you need. Have had mine for years, no issues.

Why is it so sad??

looks like mud doesn't like that link

 

[GLTHFJ60]

Turn off your adblocker. It's an amazon link.