That's a nice looking truck!
Sent from my iPhone
Sent from my iPhone
Official ONSC member buying/selling thread (3 Viewers)
- Thread starter southerncruiser62
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
jfz80
Cruisin’
I've seen it a few years ago. Some non stock touches but all around nice piggy. How much is a pint of blood going for these days ???
Need a 2F oil pan and the hard coolant lines for an FJ60.
I believe that the oil pan can be any 2F, but the coolant hard lines are going to be specific to the FJ60.
I believe that the oil pan can be any 2F, but the coolant hard lines are going to be specific to the FJ60.
I've got a full set of stock front and rear seats that would look a lot better than those lazyboy recliners masquerading as bucket seats.
I should totally buy that. Just because of the seats.
Sent from my iPhone
EL WINCHO IS SOLD, AND THE CABLE TOO - UPDATED 2/1
I have 85ft of 3/8 synthetic winch line off my Engo 10000S, and the winch itself. The rope has never been used, zero pulls. The winch needs a solenoid, motor did turn and works. Winch is a year old if that much. Selling separate.
Rope $250 ($3 per ft)
Winch $50 without rope
I have 85ft of 3/8 synthetic winch line off my Engo 10000S, and the winch itself. The rope has never been used, zero pulls. The winch needs a solenoid, motor did turn and works. Winch is a year old if that much. Selling separate.
Rope $250 ($3 per ft)
Winch $50 without rope
Last edited:
Walkerm916
Too many hobbies
Where are you located interested in the winch.
Matthews, SE Charlotte
RedHeadedStepChild
Proudly wearing my MC1R mutation!
Upgrading, Izzy?
Yup, Superwinch 11500SR. It's what the instructors recommend, they have been dead on right every time. Learned my lesson.
The top of the line Superwinches are great units.
Drove by there today. Buddy of mine works there and told me about it. I was planning on going by at lunch tomorrow. I'll let you guys know what I find out. Apparently they were offered 6 but didn't budge. Looked to have some rust on the rocker panels but it was gated to I couldn't get a close look.
Eric, I thought you were looking for a 40?
jfz80
Cruisin’
It was 9x00 a few years back off 66.
Didn't have that peeling paint on reAr rocker St the time.
Didn't have that peeling paint on reAr rocker St the time.
jfz80
Cruisin’
Haha you can't fit all those kids and all that gear in a 40 !
Is this lesson documented somewhere that I missed? What happened to the Engo - you just bought that thing? I mean, like a year ago... But that's like pretty recent for equipment that should last longer than a year.
You bet, its a lovely winch, you should buy it, for cheap! I change winches like I change wenches, often and always upgrading!
Long story, but the Engo let me down first time I used it for the advanced 4WD class in around Uwharrie. So I am not fooling around with it, I just ask the guys I consider the masters and have never steered me wrong "okay, this is a piece of s***, what should I get" Answer "Superwinch, it has always given us the least amount of trouble in the field". These guys do this everyday, I have never done it. So I am saying "yes sir, order placed". Dont want to deal with the Engo, moving on....
Lesson is, whatever Scott and Mike and Tony and Ron and Karl and the rest of the crew tells me to do, I do it.
Long story, but the Engo let me down first time I used it for the advanced 4WD class in around Uwharrie. So I am not fooling around with it, I just ask the guys I consider the masters and have never steered me wrong "okay, this is a piece of s***, what should I get" Answer "Superwinch, it has always given us the least amount of trouble in the field". These guys do this everyday, I have never done it. So I am saying "yes sir, order placed". Dont want to deal with the Engo, moving on....
Lesson is, whatever Scott and Mike and Tony and Ron and Karl and the rest of the crew tells me to do, I do it.
I would like to have another 40. I really miss mine. We have 2 trucks at most events anyway so it shouldn't matter much. I want to add another cruiser and kinda looking for something different. I mean 3 Eric's in the club and all of us have white 80's. Lol. Need something that stands out a bit.
Hate to hear about the Engo Izzy. I love mine. Pulled out a ram 3500 work truck loaded with gas welding tanks like a champ. I cannot be happier with mine. It's the 12k model.
RedHeadedStepChild
Proudly wearing my MC1R mutation!
An HJ47 could fit a lot Rymers.
looking for any aftermarket used front bumper that can hold a winch for an fj80. Im located in Charlotte Nc. Pm me with anything that would work. Thanks
Will, did you and I meet at Exxon last month when I had my hood up on my green 80?
