Official ONSC HAM Thread (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Jamie - we need to form a sub-group for "Worst HAM Operators in the Country". My credentials in this area are pretty strong...

Request for assistance from the more learned members of this forum: I finally was able to get CHIRP communicating with my Baofengs (models UV-5R and BF-F8HP) and programmed the radios based upon the very finest Youtube instructional videos. Problem - I can receive the NOAA broadcast off the UNC tower, but cannot receive or broadcast to the W4UNC repeater on the same tower. I cannot get any other area repeater for that matter. Would anyone be willing to review screenshots of my CHIRP settings to determine if there are any obvious missettings? Otherwise I am planning to attend the Saxapahaw meet on 2/22 - will buy your breakfast in return for tech support!

BTW, do have my technicians' class license (KK4VOU).

Ensure your repeater offset (+5.0 Mhz) is correct or communication to the repeater won't occur.
 
No. Correcting the offset (I had it set to 0.600) did not make a difference. In case there are any CHIRP wizards out there, here are my current settings:

Try turning off the tone squelch (just delete 131.8) to receive. Put 107.2 in the Tone cell beside W4UNC if you want to talk to the repeater.

You might also want to delete that S in the Skip cell, it makes it skip that memory slot when scanning which is good for weather stations but not great for repeaters.

That's just from my poor memory but I can compare to my file when I get home. We'll get it working.
 
I wanted to post up here for any experienced help finalizing my HAM setup in the 80 series. I've got a YAESU 857 and below is the list of additional items I am going to need to finish it. I've sent an email to Ham Radio Outlet essentially with the same list asking for their advice, so you all will be graded. If anyone has a setup in CLT that I could come check out I would appreciate it. My biggest question right now is mounts for the antennas (Yotateq?) and getting the wires into the cab. Where do you mount the radio versus the face plate? Thanks in advance for any experience/help.

LDG YT-100 Antenna Tuner
MFJ-281 Speaker
Diamond SG7500A for UHF comms
Yaesu YSK 857 separation kit
Chameleon Cha Mil for HF Comms 10M
Diamond RSA 3474 connector
ABR Industries LLC 218XATC-PL-SO-3 cable to get through the tailgate
 
www.k0bg.com for all the other stuff you havent thought of. There is alot more to doing HF mobile then you think.
 
www.k0bg.com for all the other stuff you havent thought of. There is alot more to doing HF mobile then you think.


Like everything technical this is definitely a rabbit hole! I'll spend the next 6 months reading through the information on this website. There is a lot of really great information there.
 
Rugged Radios are race radios that have gotten popular lately in all kinds of motorsports. If you go check them out, they look exactly like baofengs, but blue instead of black. A few times I've tried to figure out which bands/frequencies they're on, because they have to be 2M/70cm, but I always failed. Today, I looked again, and found the frequency charts.

If you ever come across a friend on the trail with a race radio and you want to talk with them, use these charts to program your HAM to be able to do it:
 

Attachments

  • Frequency-VHF-Mobile.pdf
    754.3 KB · Views: 95
  • Frequency-UHF-VHF-Handhelds.pdf
    39.6 KB · Views: 76
  • Frequency-UHF-Mobile.pdf
    31.2 KB · Views: 53
  • Frequency-RM100.pdf
    502.2 KB · Views: 66
  • Frequency-RM60.pdf
    696.6 KB · Views: 45
cont.
 

Attachments

  • Frequency-RM25-RM25WP-RM50.pdf
    1.3 MB · Views: 78
  • Frequency-RH16C.pdf
    48.7 KB · Views: 58
  • Frequency-RH5SL.pdf
    29.6 KB · Views: 50
  • Frequency-RH-5R-5X-v2.pdf
    812.1 KB · Views: 115
  • Frequency-RH-5R-5X-v1.pdf
    533.6 KB · Views: 67
Good info but be careful on those frequencies. Rugged Radios has been issued a citation by the FCC for selling some of those radios. The way I understand it they have a business license on some/all of those frequencies but there are other issues. Those licenses are mostly regional not nationwide and have many other legitimate businesses who paid for their spot you might be interfering with. Ham license doesn't cover these frequencies.

It's not 100% technically legal but the best way I know of to not cause trouble is take that Beofeng and program in FRS maybe GMRS or MURS frequencies and have fun. There seems to be some growth in the number of people using GMRS for trails.

Quoted from another forum....

Here is who you could be interfering with by using the frequencies programmed into that radio.

1 WTHRMN 151.625
2701 Licensed users. Including: Union Pacific, FCA US, Subaru, University of Oklahoma, NM State University, BP, Exxon, Boeing,
Vertex standard (Yaesu ham radios), UPS

2 BFGRLY 151.715
1243 Licensed users. Including: Many school districts, City/State agencies, McDonalds, and various businesses.

3 BAJAPTS 154.980
644 License users. Including: State, City, County, Police and Fire for States all over the country.

4 NETWORK 151.685
1232 Licensed users. Including: American Airlines, School districts and Universities, Costco, fast food restaurants.

5 CHECKRS 151.925
1178 License users. Including: Verizon, Haliburton, Hospitals, City/State, Schools/Colleges, various businesses.

6 FAIR 150.860
127 License users. Including: Hospitals, automotive, schools.

7 YOKOHAM 153.110
396 License users. Including: Exxon, Marathon Oil, Shell, ConocoPhillips, Chevron, NBC Telemundo, FCA US, CBS, Clear Channel, various other TV/Radio.

8 RUGGED RELAY 152.960
653 Licensed users. Including: Various Oil/Gas companies, Concrete companies, Kingsford Charcoal, many farms, Urgent Ambulance service, schools.

9 CHKRS 2 151.505
1736 Licensed users. Including: UPS, Construction companies, Conoco, Phillips 66, Exxon, Goodyear, AM General, T-Mobile, Tampa Bay Search and Rescue & REACT. Denali Off Road club holds a license for their members.

10 BFGPITS 153.395
282 Licensed users. Including: FCA US, Northrop Grumman, Dow Corning, Oil/Gas, farms, Tyson foods, Kroger, Oklahoma State University, Boeing.

11 MAG 7 153.380
295 Licensed users. Including: GE, PPG Paints, Ford, Trane, Citgo, 3M, Green Bay Packaging, Valero, Yokohama Tires, OK State, University of Texas Permian Basin, Idaho Power Company, New Hampshire, Electric Coop, IBM.

12 RESCUE 155.160
1133 Licensed Users. Including: National Ski Patrol, many search and rescue teams, many municipalities, schools, and hospitals.

13 CORE 153.245
227 Licensed Users. Including: Sinclair, Exxon, Dow Corning, Northrop Grumman, 3M, Volvo Trucks, Nestle Purina, various manufacturing companies, Dana (axles), many schools, municipalities.

14 PRIVATE 156.675
117 Licensed Users. Including: Municipalities, Chevron, Shell, towing companies, oil/gas, many maritime businesses,

15 SANDLMO 152.510
53 Licensed Users. Including: Communication companies, Telephone companies,

16 PCI RLY 154.515
1738 Licensed Users. Including: Municipalities, many Hospitals, many schools, Fastfood.

17 BITD 151.490
540 Licensed Users. Including: Oregon State Forestry, Nevada Dept of Wildlife, State of Arizona, Penn State Police, State of California, farms, NH State Dept of Corrections, City/County, State of Maine Info Tech, Texas DOT, schools, State of Washington, State of West Virginia, Lockheed Martin,

18 KOH 1 157.450
200 Lincesed Users. Including: many hospitals, schools, City/County, State of New Jersey, City of New York, State of Colorado, State of California, State of New Mexico, LA County, State of Nebraska.








MURS band (Frequencies below, 2 watts)
1 151.820 MHz 11.25 kHz
2 151.880 MHz 11.25 kHz
3 151.940 MHz 11.25 kHz
4 154.570 MHz 20.00 kHz
5 154.600 MHz 20.00 kHz

Or FRS

1 462.5625 2 W 12.5 kHz
2 462.5875 2 W 12.5 kHz
3 462.6125 2 W 12.5 kHz
4 462.6375 2 W 12.5 kHz
5 462.6625 2 W 12.5 kHz
6 462.6875 2 W 12.5 kHz
7 462.7125 2 W 12.5 kHz
8 467.5625 0.5 W 12.5 kHz
9 467.5875 0.5 W 12.5 kHz
10 467.6125 0.5 W 12.5 kHz
11 467.6375 0.5 W 12.5 kHz
12 467.6625 0.5 W 12.5 kHz
13 467.6875 0.5 W 12.5 kHz
14 467.7125 0.5 W 12.5 kHz

GRMS (with a license higher power is allowed)
15 462.5500 2 W 12.5 kHz
16 462.5750 2 W 12.5 kHz
17 462.6000 2 W 12.5 kHz
18 462.6250 2 W 12.5 kHz
19 462.6500 2 W 12.5 kHz
20 462.6750 2 W 12.5 kHz
21 462.7000 2 W 12.5 kHz
22 462.7250 2 W 12.5 kHz
 
I had no idea that rugged radios were stepping on so many others, lol.

Also good call on HAM frequencies. I did not remember that 2m HAM ends at 148.00:

1607628068994.png
 
 
Guess it’s about time for my annual HAM post.
This bad boy will go on brine in a few days.
image.jpg
 
Johnny!
What’s sad? Is it my lack of beer in the fridge?
That’s only because it’s bourbon season up here.
 
How did everyone's winter antenna projects go?
 
Quick antenna project. I had moved my antenna from the hatch to the edge of the hood last year because I felt like it, and I somehow ripped it off the truck at CMCC this year. No clue when it happened, but it was completely ripped off and somehow didn't damage any of the sheetmetal around it.

Found this new style that surface-mounts to sheetmetal, so I stuck it on the hood. Should be harder to rip off of this spot. Just drill a 3/4" ish hole, slot the lower half of the NMO mount through the hole, and the outer half screws on to clamp it onto the sheetmetal. Seems sturdy, we'll see how well it works.

1628878174988.png


1628878197063.png


1628878218942.png
 
I drilled a hole in the roof of my Tacoma, haven't regretted it a bit. But always forgetting to remove the antenna before entering parking garages.

Mounts i run I currently have a #503. #504 will be next NMO i have to put in.
 
Oh damn, that's fancy! I got a $15 dollar mount with cable from Amazon, lol.
 

Users who are viewing this thread

Back
Top Bottom