Official For Sale/Trade/WTB/Free Thread (3 Viewers)

[TRFCSUX]

Log into Facebook

Log into Facebook to start sharing and connecting with your friends, family, and people you know.

www.facebook.com

Cleaning out some room for another truck, great price on a really nice bike.
2021 Honda CB500X with 1700 miles and nice add ons.

 

[FuglyYota]

Putting these here and in the Keystone sections first. 35x12.50x15 MT Baja Boss tires with aluminum wheels. 2 long wheeling weekends and probably less than 500 road miles on the tires. Wheels came with the truck when I bought it in 2015, look like American racing knockoffs. Tires were mounted and balanced by 4WParts locally. I’ve had them to ~60 mph and then my driveshaft was at its limit. Centers fit over solid axle hubs. New the tread depth is 21/32nds, these are at 20. They could probably use new valve stems.

$1000.00 obo, pickup in South Jersey, could also possibly meet to help out delivery.

 

[Diplodocus]

100 Series goodies. All pick up only in Alexandria, VA (Del Ray neighborhood).

Used 100 Series Front Runner Slimeline II roof rack (SOLD)
Front Runner accessories:
Ratcheting Spade Mount $40
Double Jerry Can Holder X2 $100 ea.
SS Tie Down Rings $5 ea.
Wolf Pak Mounting Brackets X3 $60 ea.
Water Container $60
Water container mounting brackets X2 (SOLD)
Spare Tire Mount $40
Mounting hardware for the rack included

This rack is less than a year old and performed flawlessly during our Skeleton Coast expedition last year. Now that the truck is in the U.S., it mostly visits the grocery store and needs to fit in a parking garage at work...so the rack has to go. (SOLD)

What is included in the sale:

What it looks like fully loaded on expedition:

Trail Tailor Adjustable rear upper control arms. Used for approximately 500 miles. (SOLD)

Diff Drop (seen above). Unknown manufacturer. Very slightly different height than a Slee diff drop, so will not work with Slee skid plates. $50

 

[CondeCruiser]

If anyone is looking for one.

For Sale - Virginia--- CCOT FJ40 rain gutter deluxe kit

Bought this 2 years ago to fix another top that I have but ended up getting another whole hard top in trade. No longer need this. Will come with 110 rivets. It is not welded. Will come in pieces. $325 shipped

forum.ih8mud.com

 

[chudly]

Trail Tailor Adjustable rear upper control arms. Used for approximately 500 miles. $150
View attachment 3873518

is that adjustable rear upper control arm an older design? I'm seeing 2 adjustable ends but the website shows only one end being adjustable

 

[Diplodocus]

is that adjustable rear upper control arm an older design? I'm seeing 2 adjustable ends but the website shows only one end being adjustable

When I bought it I believe he had two options, with this one being the more convenient and more expensive option. You can mount it up completely and then adjust it by rotating the shaft.

 

[Pulgasari]

Looking for a 98-99 Land Cruiser rear axle with the OEM diff locker

 

[JohnVee]

Looking for a 98-99 Land Cruiser rear axle with the OEM diff locker

@Roxx?

 

[Roxx]

Looking for a 98-99 Land Cruiser rear axle with the OEM diff locker

I got one if alex passes on it.

 

[Pulgasari]

I got one if alex passes on it.

Great, if he doesn’t want it I’d be happy to buy, just let me know.

 

[TRDdrew]

SOLD

5th gen 4runner white knuckle off-road sliders, have U bolts just needs new nuts.

Can bring to the swap meet later this month if needed.

listed for 500 is the classifieds. 400 to any CLCC member

 

[NearJetties]

100 series Trail Tailor Hidden Winch Mount - brand new in box, never mounted.

Asking $495. You avoid tax and shipping. Can deliver within reasonable distance of Alexandria or McLean.

Hidden Winch Mount 100 Series

Made from CNC cut and bent 1/4" steel with black powdercoating Designed to fit up to a ComeUp 12.5rs winch with maximum dimensions of 24"W x 8.1"H x 6.3"D Cutting of the factory front bumper crossmember and cover required for install Re-uses all of the OEM cover tabs for a solid mount Toyota...

trail-tailor.com

Bump $400 for club members or make an offer

I also have the Trail Tailor front recovery points available.

I plan to be at the swap meet

 

[1MOA]

PENDING SALE

5th gen 4runner white knuckle off-road sliders, have U bolts just needs new nuts.

Can bring to the swap meet later this month if needed.

listed for 500 is the classifieds. 400 to any CLCC member

View attachment 3878745

if that falls through hit me up on those

 

[Diplodocus]

100 Series goodies. All pick up only in Alexandria, VA (Del Ray neighborhood).

Used 100 Series Front Runner Slimeline II roof rack with the following accessories:
Ratcheting Spade Mount
Double Jerry Can Holder X2
SS Tie Down Rings
Wolf Pak Mounting Brackets X3
Water Containers X3
Water container mounting brackets X2
Spare Tire Mount
Mounting hardware for the rack included

This rack is less than a year old and performed flawlessly during our Skeleton Coast expedition last year. Now that the truck is in the U.S., it mostly visits the grocery store and needs to fit in a parking garage at work...so the rack has to go. $1,500

What is included in the sale:
View attachment 3873491

What it looks like fully loaded on expedition:

View attachment 3873495

1 Yokohama Geolandar A/T G015LT275 /70 R18 125S E1 OWL mounted on a steel Tundra spare tire rim. This tire is mounted and balanced, but should be used as a TRAIL SPARE only, due to minor sidewall damage (caused by rubbing while mounted on my dissent rear tire carrier). This tire has been used, but there are very few miles on it. $180.
View attachment 3873513View attachment 3873514

Trail Tailor Adjustable rear upper control arms. Used for approximately 500 miles. $150
View attachment 3873518

Diff Drop (seen above). Unknown manufacturer. Very slightly different height than a Slee diff drop, so will not work with Slee skid plates. $50

Seems likely I will be bringing all this stuff to try and sell at the swap meet on April 27 (except the roof rack, which I don't have an easy way to transport, but a buyer would be welcome to follow me home afterwards and load it up or bolt it on).

I realize I also forgot to post up the factory air intake and air cleaner box I took off my truck to install the cyclonic air filter. Only has ~100K miles on it. Might help someone who had to JB Weld a broken nipple or some such nonsense ($150).

 

[chudly]

Seems likely I will be bringing all this stuff to try and sell at the swap meet on April 27 (except the roof rack, which I don't have an easy way to transport, but a buyer would be welcome to follow me home afterwards and load it up or bolt it on).

I realize I also forgot to post up the factory air intake and air cleaner box I took off my truck to install the cyclonic air filter. Only has ~100K miles on it. Might help someone who had to JB Weld a broken nipple or some such nonsense ($150).

I may buy those rear upper control arms!

 

[imperium]

Seems likely I will be bringing all this stuff to try and sell at the swap meet on April 27 (except the roof rack, which I don't have an easy way to transport, but a buyer would be welcome to follow me home afterwards and load it up or bolt it on).

I realize I also forgot to post up the factory air intake and air cleaner box I took off my truck to install the cyclonic air filter. Only has ~100K miles on it. Might help someone who had to JB Weld a broken nipple or some such nonsense ($150).

I'm potentially interested in the roof rack but am unable to DM you. Can you send me a DM? I have a few questions about it.

Thanks!

 

[Diplodocus]

I'm potentially interested in the roof rack but am unable to DM you. Can you send me a DM? I have a few questions about it.

Thanks!

Thanks for mentioning you were unable to DM me. Buried deep in my settings I found that nobody has been allowed to DM me. All fixed now!

 

[matzell]

I am going to cross post these here. 33 x 10.50 x 15 Maxxis Razr Mt's. Set of 5
Post 571

BBRC For Sale / Wanted Thread

Looking for stock 100 Series Land Cruiser (non AHC) torsion bars

forum.ih8mud.com

 

[Von Hayek]

I'm looking to purchase a Hi Lift mount for an FJ40. Unless I get rear swing out, I can't think of a better method to mount it than the method that was designed to put it standing upright on the passenger-side running board. It looks like a snag waiting to happen, but @StaleAle promises to pay for any damage I might incur. The mount doesn't appear to be made anymore. Does anyone have one laying around that they want to part with?

 

[mgrs]

I'm looking to purchase a Hi Lift mount for an FJ40. Unless I get rear swing out, I can't think of a better method to mount it than the method that was designed to put it standing upright on the passenger-side running board. It looks like a snag waiting to happen, but @StaleAle promises to pay for any damage I might incur. The mount doesn't appear to be made anymore. Does anyone have one laying around that they want to part with?

Mr Landcruiser in Oz still makes the side mount. I've got one if you'd like to take a look.