I just replaced the entire engine harness due to every connector breaking when touched(but most importantly the break in the harness to injector 6. Disconnected the battery before starting and every single plug is connected and accounted for including (engine sensors, maf, ecu, trans, and O2 sensors.
CEL is rapidly flashing (27 times to be exact) and will not even attempt to crank…
Scan gauge just says “connecting” so I can’t see if there’s an engine code
EGR is deleted but was before I replaced the harness and was running fine (on 5 cylinders)
CEL is rapidly flashing (27 times to be exact) and will not even attempt to crank…
Scan gauge just says “connecting” so I can’t see if there’s an engine code
EGR is deleted but was before I replaced the harness and was running fine (on 5 cylinders)