it’s the standard hitch. I got mine back in 2008 no swing outs back then. If you get the rear bumper from dissent. He actually puts a 2” receiver on the accessories carrier swing out for hitch mount bike racks.
New dissent offroad no cut rear bumper! (3 Viewers)
- Thread starter benc
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
So it’s been a while since you posted that... what’s this “special thing” that’s in the works? Some sort of secret?Patience my friend. I’m sure there’s a special project in works... ahem ahem..don’t want to give away too much..
I'm not getting swing arms either. My dogs are always with me and it's a pain in the butt to get access with them in place.
I like that.
...the suspense is killing me...
Wasn’t it already mentioned with the aluminum accessory mount with table?
Me too. I've been talking about this with Ben since last year!
Nope never mentioned before. Patience my friends. My rig is going to the craftsman next week.
benc
Supporting Vendor
- Thread starter
- #270
Sorry for the lack of updates guys!
Been pushing hard to get all these bumpers finished up and dialed in.
To answer some of the previous questions.
The tail lights are not covered, the tire and basket set in the same location as the previous bumper. The tire mount can be flipped to raise the tire for better license plate visibility, the plate can also be mounted to the other swing arm.
Also I apologize for the guys that have already received the bumper without installation instructions, I’m working on those as well. There will be extra bolts on the no swing bumpers, you will want to install these bolts with anti seize into the threaded holes not being used to prevent rust. If the coaters did not plug the holes when coating a tap may be needed to clean out the threads.
we are focusing all of next week on welding and packing the rear bumper. Should have 20+ shipping out over the next few weeks.
That being said watch your phone and emails. We will be shipping most of the bumpers via Fastenal due to some policy changes with ups. I truly appreciate how gracious you all have been and have some nice upgrades for all the orders that have gone over the estimated lead time!
Here are some pics I have been gathering for the instructions. These show some of the details in the swing out assy.
Been pushing hard to get all these bumpers finished up and dialed in.
To answer some of the previous questions.
The tail lights are not covered, the tire and basket set in the same location as the previous bumper. The tire mount can be flipped to raise the tire for better license plate visibility, the plate can also be mounted to the other swing arm.
Also I apologize for the guys that have already received the bumper without installation instructions, I’m working on those as well. There will be extra bolts on the no swing bumpers, you will want to install these bolts with anti seize into the threaded holes not being used to prevent rust. If the coaters did not plug the holes when coating a tap may be needed to clean out the threads.
we are focusing all of next week on welding and packing the rear bumper. Should have 20+ shipping out over the next few weeks.
That being said watch your phone and emails. We will be shipping most of the bumpers via Fastenal due to some policy changes with ups. I truly appreciate how gracious you all have been and have some nice upgrades for all the orders that have gone over the estimated lead time!
Here are some pics I have been gathering for the instructions. These show some of the details in the swing out assy.
@CBeckFJ You have an OEM back up camera on a 99? Man, my 99 must have been a BASIC model. I got a tape player in mine, a cracked drivers seat, missing center cup holder, dented tail gate with no accident damage?? , mix matched ignition coils, dog chewed window tint, the ugly fender flares, and I am sure I am missing more.
Its going to dressed up with @benc goodies. Cant wait!
Its going to dressed up with @benc goodies. Cant wait!
Slee offers a rear camera location bracket that can mount with the spare tire. I ended up buying one of those and looks like it should work well...
not on the 99. Hoping to pick up an 05 LX soon and figured i'd ask the question when i start modifying it@CBeckFJ You have an OEM back up camera on a 99? Man, my 99 must have been a BASIC model. I got a tape player in mine, a cracked drivers seat, missing center cup holder, dented tail gate with no accident damage?? , mix matched ignition coils, dog chewed window tint, the ugly fender flares, and I am sure I am missing more.
Its going to dressed up with @benc goodies. Cant wait!
Thanks! Do you have the link to it? I couldnt seem to find it anywhere
They don't have it listed anywhere. I saw it on IH8MUD and then called them directly to purchase it. It was like $40. It gets mounted behind the spare wheel on the studs and will come out of the center of the wheel.
do you have a link?
Dissent Off-road (@dissentoffroad) • Instagram photos and videos
14K Followers, 802 Following, 572 Posts - See Instagram photos and videos from Dissent Off-road (@dissentoffroad)
www.instagram.com
