has anyone narrowed one of these 10.5” tundra axles?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Not that I’ve seen...
they are badass diffs though if you can get around the 5-lug issue.
Redrill them sounds crazy but I did back in 86 and flogged it for 175K without any issue.
I'd run the stock width with deeper offset wheels.
has anyone narrowed one of these 10.5” tundra axles?
The infamous Raisin runs the Tundra diffs , since way back when, and it's pretty sick with the Toyota V8, so unless you run it under a pig everything should hold up really well....
Maybe Cruisermatt can post a pic - Cliff is the current owner and he's not on here much.
I'd run the stock width with deeper offset wheels.
I believe that the 100 and 200 differentials are the same with the beefier pinion. AFAIK both also have 32 spline axle shafts. The 100 series rear axle has a slightly offset rear differential and the 200 has a centered rear differential.Is the 200 9.5" the same as the 100 9.5? Or both 32spline pinion