Looking for Diesel mechanic in Saskatoon, Saskatchewan (6 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

You could give ENS a call.
If they cannot help you, they may have suggestions.
 
You could give ENS a call.
If they cannot help you, they may have suggestions.
Thank you, for replying. they’ve never been helpful ever over the years. They sell diesels to the mines but do not service. They won’t outsource old vehicles parts.
 
I feel your pain, but hopefully they could recommend someone.
4wheelauto in Edmonton has always been good to me.
What are your driving engine wise, and what is the issue.
 
I feel your pain, but hopefully they could recommend someone.
4wheelauto in Edmonton has always been good to me.
What are your driving engine wise, and what is the issue.
Dan @ 4wheel is a godsend! Highly recommend. It’s my dad’s LC, it’s a BJ70, not sure if it’s a fuel pump issue. It either won’t start or stay idle. We primed the pump and it’ll run for a few minutes and dies. Tried bleeding the lines and thought we got the air lock, replaced fuel filter…
We are at a loss and can’t find a good mechanic.
 
If it runs while priming, then suspect the fuel supply.
Vaccum leaks are hard to find, sometimes you can hear the squeak of a vacuum leak if your surroundings are quiet.
Change hoses and check clamps.
Also check the EDIC, even disconnect the mechanism and run the unit manually just to ensure you deal with one issue at a time.
 
Could be a leak at the primer pump itself, all 3 of my cruisers with B series engines had what looked like an original primer pump in them when I bought them and was one of the first things I changed.

John @Radd Cruisers has always been helpful with knowledge and parts.

 

Users who are viewing this thread

Back
Top Bottom