Malleus
Far west of Siegen
Has anyone done this without removing the transmission?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Yes. Just remove the transmission pan.Has anyone done this without removing the transmission?
Did you get a new, or used, replacement?I can let you know- drained my truck last night to let it drip. I’m going to change the kickdown cable tonight- there is lots of speculation it seems about how to go about it. I plan on dropping pan and maybe valve body.
New cable from Toyota. I’m a day late and just starting into it, but I’m back at it tonight! So far I think I can cheat and leave valve body in place. I removed shift console to get at the c-clip- going to fight with that now, check back in an hour lolDid you get a new, or used, replacement?
Please post up photos of the process. While the cable it out could you measure
it's length?
Any advice how to get to it? What size is the bolt?I replaced mine on my ‘94 by just dropping the pan. You can disconnect the cable and pull it out without touching the valve body.
The hardest part was the one bolt on the bellhoising that holds the cable.
Any advice how to get to it? What size is the bolt?I replaced mine on my ‘94 by just dropping the pan. You can disconnect the cable and pull it out without touching the valve body.
The hardest part was the one bolt on the bellhoising that holds the cable.
@White Sheep installed this cable on his 97 Cruiser. This kickdown cable is still available and quite cheap. I've considered doing the same since my cable is stretched and requires more foot than I would like to get it to kickdown.Note:
35520-60111 is for an A442F transmission. Does not apply to 95-97 US market trucks.
@White Sheep installed this cable on his 97 Cruiser. This kickdown cable is still available and quite cheap. I've considered doing the same since my cable is stretched and requires more foot than I would like to get it to kickdown.