Tapage
Club 4X4 Panamá
On the A440F, the neutral safety switch also has contacts that turn on the backup lights. On the AW450, the switch is much more complex in that it has contacts for every shift position. These contacts tell the TCM which gear has been selected. I don't have a wiring diagram for the A442F, but I would suspect that the electronic version of the A442F would have a similar switch as the AW450. It also looks like the neutral safety switch on the A442F is mounted on the left (driver's) side of the transmission, same as the AW450. Is that true?
I never saw a AW450 in detail .. but I take the wiring harness of the A442F and use it to do this fancy stuff
when I did my tranny swap ..
IN the top of my mind I don't have the color codes, but aren't hard to found and yes there is a signal for every shifter position in the A442F position sensor .. ( thougt it helps with the solenoids and the ECT and 2nd start )